engines used for sale (1,692)

Key data: 800 KW

Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale

MWM TCG 2020 V 20 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearings - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve tappets - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and othe ...

MWM TCG 2020 V 16 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearing - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve plunger - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and other ...

MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.

MWM TCG 2016 V 8 Exchange Engine / Shortblock It is a refurbished replacement engine. Repaired according to manufacturer guidelines and RAL quality seal. Further information on the scope and design can be found on our homepage buecker-essing.de Out- and installation as well as service around engine and CHP can be optionally provided. Please contact us for a written quote. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

Semi-complete engine Mercedes Actros OM 501 LA – Euro 5 – Type 541.976/980 It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

Partial complete engine for Mercedes Citaro, model OM 902.934 It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

MAN D 2866 LUH 24

MAN D 0226 MTE fuselage engine, industrial/marine version It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

MAN D 2066 LF 57 Short-Block It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation and installation as well as service around the engine optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

Key data: 2000 KW, 1500 1/min

Jenbacher JMS 612 | Engine and generator with control cabinets | 2,000 kW el. | Year of manufacture 2016 For sale: Jenbacher JMS 612 gas engine with generator (genset), 2,000 kW electrical power, built in 2016. Condition All maintenance was carried out by 2G according to the Jenbacher maintenance plan. The engine is still in its original condition. Scope of Delivery Engine and generator (genset) Control XT4 Control cabinets A1 and M1 with Diane XT4 Control cabinet with higher-level control Documentation, circuit diagrams Viewing on request. The price is on a negotiation basis.

Key data: 2000 KW, 1500 1/min

CHP Jenbacher JMS 612 | 2,000 kW el. | Year of manufacture 2016 | Complete package For sale: Jenbacher CHP JMS 612 with 2,000 kW electrical output, built in 2016, as a complete package. Condition All maintenance was carried out by 2G according to the Jenbacher maintenance plan. The engine is still in its original condition. Scope of Delivery Engine, Generator, Control Engine and generator (genset) Control XT4 Control cabinets A1 and M1 with Diane XT4 Control cabinet with higher-level control 5 Frequency Converters Gas and oil supply Gas pressure control system (2016) Vorkammen gas compressor, Mehrer (2016) Storage gas tank (2016) Fresh oil storage tank (2016) Waste oil storage container (2016) Oil pumping station (2016) Cooling and ventilation 5 Supply and exhaust fans (2016) Table cooler with 8 fans, Günthner (2016) Table cooler with 6 fans, Gü ...

Hydraulic motor Danfoss OMV 50 The spare part is in good condition, but this is still a used item that shows or may show slight signs of wear. Internal number : 628 457 398079628098

An unused Siemens servo motor is available. Axle height: 160mm, power: 31kW, torque: 257Nm, speed: 1150rpm, moment of inertia: 2586kg/cm², weight: approx. 300kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

Axle height: 80mm, power: 5.4kW, torque: 22.4Nm, speed: 2300rpm, moment of inertia: 98.3kg/cm², weight: approx. 50kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

Key data: 1025 KW, 1800 1/min

In very good condition Rotating Removed due to scrapping of ship The engine has made an overhaul of the piston liners and head at 72,000 hours of rotation

Key data: 4700 , 600

For sale complete installation 2x diesel generator set 1x Generator set Brand: MAN Type: 8L 40/45 Year: 1998 Power: 5832 KVA Alternator: Leroy Somer 1x Generator set Brand: MAN Type: 6L 40/45 Year: 1994 Power: 4265 KVA Alternator: AVK The equipment included with this installation can be seen in the photo More photos on request

Hydraulic motor Manufacturer: Poclain Hydraulics Model No.: MSE11-2-G19-A11-2A50-257EM The product is NEW and fully functional. see pictures for more details.

Hydraulic motor Manufacturer: Poclain Hydraulics Model No.: MSE11-2-D11-R11-0000-7DM0 The engine is NEW and fully functional. see pictures for more details.

Key data: 90 KW, 1480 1/min

Three-phase motor Part Number: HEFIE2 WK280/4-360T Manufacturer: EMOD 90KW 50/60Hz 690V 1480/1785 rpm. Water-cooled New, from stock.

Key data: 37 KW, 1470 1/min

Electric motor Manufacturer : VEM Model: K21R 225S 4 TWS HW Power: 37 kW NEW, unused from old stock see pictures for more details.

Key data: 45 KW, 1470 1/min

Electric motor Three-phase asynchronous motor Manufacturer : VEM Model: K21R 225M 4 KR SL TWS HW 45kW 1470 rpm Electric Motor 400V Power: 45kw Connection: 400 V NEW, orig. packaging, unused from old stock see pictures for more details.

Hydraulic motor Manufacturer: Hägglunds Model No.: CA 50 32 SA0 N00 02 19 The engine is NEW and fully functional. see pictures for more details.

Diesel fuel station, diesel tank, gas station, fuel tank system, fuel tank, gasoline tank -Diesel tank: Fuel tank, universally applicable -Overall dimensions: 530/335/H370 mm -Empty weight: 2.9 kg

Key data: 1559 KW, 1500 1/min

Jenbacher J620GSE139 Gas Engine Only – 1,559 kW – 50 Hz – 2009 – Only 80 Operating Hours Manufacturer: INNIO Jenbacher Model: J 620 GS E139 Year: 2009 Rated Output: 1,559 kW Frequency: 50 Hz Speed: 1,500 rpm Configuration: Engine Only Operating Hours: Only 80 Hours Since New Available for sale is an exceptionally rare and low-hour Jenbacher J 620 GS E139 natural gas engine, manufactured in 2009 and showing only approximately 80 operating hours since new. Opportunity to acquire a unit of this size and specification with such minimal runtime are extremely uncommon, making this engine an outstanding option for power generation projects, plant expansion, standby applications, or replacement requirements. The J 620 series is recognized worldwide for its robust design, high reliability, and proven performance in continuous-duty gas power generation applications. This  ...

Key data: 2679 KW, 1500 1/min

2016 Jenbacher 616 Containerised CHP Unit – Natural Gas Generating Set 2.7 MW at 11kV UK Power Generators Ltd is offering is offering a Jenbacher 616 (J616) containerised Combined Heat and Power (CHP) generating set, manufactured in 2016, configured for natural gas operation and built to ISO 8528 standards. This is a complete containerised power and heat generation solution, ideal for industrial facilities, district heating, greenhouses, utilities, and energy centres seeking high-efficiency CHP performance. Technical Specifications of the available unit: Manufacturer: GE Jenbacher GmbH & Co. OG (Austria) Model: Jenbacher 616 Year of Manufacture: 2016 Fuel Type: Natural Gas Rated Electrical Output: 2.7 MW Rated Voltage: 11,000 V Frequency: 50 Hz Rated Power Factor: 1.0 Rated Current: 141 A Performance Class: G2 Max Ambient Temperature (Intake Air): 30°C  ...

; Transport weight [kg]: 1200

; Transport weight [kg]: 440

; Transport weight [kg]: 370

; Transport weight [kg]: 1070