47275 results

similar results found in category pre press: software

item-No.: 139678055
-
93.000 €
country-it IT
- Vier Farben Größe max 52x74 cms. Baujahr 1997 mit 2+2 oder 4/0 - CPC 1.04, Cp Tronic, Alcolor , Technotrans Kälteanlage - 104 mio. Kopien, Hohe Stapellieferung - Autoplate, Alle automatischen Waschgeräte, Preset, Pulverspray Alphatronic - Jeder Drucktest möglich, Perfekte Bedingungen und immer sehr gut gepflegt -In produktion, Verfügbar im September 2019
item-No.: 139678054
-
93.000 €
country-it IT
- Four colours size max 52x74 cms. Year 1997 with 2+2 or 4/0 - CPC 1.04, Cp Tronic, Alcolor , Technotrans refrigeration system - 104 mil. copies, High pile delivery - Autoplate, All automatic washing devices, Preset, Powder spray Alphatronic - Any print test possible, Perfect conditions and always maintained very well -In production, Available in September 2019
item-No.: 139678049
Horizontal band saw fully automatic Cutting diameter round: 250 mm Cutting length: 400 mm Cutting length Double feed: 800 mm Cutting speed infinitely variable: 20 - 70 m/min Saw band: 3660 x 25 x 0.9 mm Rolling duct: 2500 mm Roll width: 300 mm Cutting pressure approx.: 2 - 35 kg Saw drive: 0.55 kW Pump drive: 0.81 kW Weight approx.: 1200 kg Dimensions (L x Wx H ) approx.: 4000 x 2000 x 1200 mm Set of bimetallic saw bands, Automatic material feed, Coolant device, Documentation in German.
item-No.: 139678044
-
4.600 €
country-de DE
G 114 Diesel Tankstelle DIN 6624/2/B Inhalt 5.000 l Baujahr 21015 Hersteller: Rietbergwerke in 33307 Rietberg Behälter Nr. 052/122 515 Durchmesser: 1,25 m Werkstoff S235IR Prüfüberdruck Test 23,0 bar Gefahrenklasse A 111 DIN FF 24/2/B Leckanzeige Typ: RW 3 Zulassungs-Nr. 2-6522-262 Preis ab Standort, netto: 4.600,00 Euro
item-No.: 139678045
-
4.600 €
country-de DE
G 114 Diesel petrol station DIN 6624/2/B Content 5,000 l Built 21015 Manufacturer: Rietbergwerke in 33307 Rietberg Container No. 052/122 515 Diameter: 1.25 m Material S235IR Test overpressure test 23.0 bar Hazard class A 111 DIN FF 24/2/B Leak display type: RW 3 Approval No. 2-6522-262 Price from location, net: 4,600.00 Euro
item-No.: 139678041
-
13.450 €
country-de DE
G 109 1 Komplette Druckluftversorgungseinheit bestehend aus: Pos. 1 1 Atlas Copco Luft Trockner mit Sterilfilter Typ FD 65 Pos. 2 1 stehender Drucklufttank letzte TÜV Abnahme 2016 Pos. 3 1 Wasseraufbereitung für Druckluftkühler Bez. OFT 355 daneben an der Wand 1 Atlas Copco Druckluftkühler Pos. 4 1 Druckluft-Kompressor Hersteller Compair Typ: DLCOFXL int. 2 Q 11-HV1 T Typ: L5RF Baujahr 2014 Leistung: 8,2 m³ pro min. bis 13  ...
item-No.: 139678042
-
13.450 €
country-de DE
G 109 1 Complete compressed air supply unit consisting of: Item. 1 1 Atlas Copco air dryer with sterile filter Type FD 65 Item. 2 1 standing compressed air tank last TáV approval 2016 Item. 3 1 Water treatment for compressed air coolers Bez. OFT 355 next to the wall 1 Atlas Copco compressed air cooler Item. 4 1 compressed air compressor Manufacturer Compair Type: DLCOFXL Int. 2 Q 11-HV1 T Type: L5RF Built in 2014 Capacity: 8.2 m3  ...
item-No.: 139678039
-
9.400 €
country-de DE
E 111 1 CIP Anlage, aufgebaut als Reinigungsanlage mit verlorener Reinigung oder als Satelliten- Reinungsanlage einsetzbar, Als Satelitten CIP Anlage einsetzbar, wenn die Haupt- Reinigungsanlage für den Gesamtbetrieb sehr weit weg ist. Bei albi Berghülen arbeitet diese CIP Anlage eigenständig und voll automatisch mit verlorener Reinigung, d.h. nach der Objekt Reinigung wird die CIP Gebrauchslösung in das Abwasser abgelassen und das Frischwasser im 1.000 l Tank wird für die nächste neue Rei ...
item-No.: 139678040
-
9.400 €
country-de DE
E 111 1 CIP system, built up as a cleaning system with lost cleaning or as a satellite cleaning system can be used, Can be used as a Satelitten CIP system when the main cleaning system for the entire operation very far away. At albi Berghülen, this CIP system works independently and fully automatic with lost cleaning, i.e. after the object cleaning, the CIP utility solution is discharged into the waste water and the fresh water in the 1,000 l tank is prepared for the next new cleaning with conc ...
item-No.: 139678038
-
3.000 €
country-de DE
E 103 Rectangular basins for CIP plant manufacturer year is 2009 existing about: Rectangular constructed tanks with following size: 1 x 3.000 for fresh water 1 x 6.000 l for pre rinsing water 2 x 6.000 Lye and 1 Tank with 6.000 l for acid with 3 CIP pressure centrifugal pumps Price up standing point: 3.000,00 Euro
item-No.: 139678037
-
3.000 €
country-de DE
103 Rechteckbehälter für CIP Anlage Baujahr 2009 bestehend aus rechteckige Tanks mit folgenden Inhalten: 1 x 3.000 für Frischwasser 1 x 6.000 l für Vorspülwasser 2 x 6.000 Lauge und 1 Tank mit 6.000 l für Säure 3 CIP Kreiselpumpen Preis ab Standort, netto: 3.000,00 Euro
item-No.: 139678035
-
103.000 €
country-de DE
D 129 Eine Krones Glasflaschen Abfüllanlage Leistung 12.000 Weinflaschen pro Stunde Typ Füller: K 323-152,Baujahr 2000 Bloc Bildung mechanisch mit einer Krones Rinser Maschine Variojet Typ K 562-235 mit motorisch höherverstellbaren Fülleroberteil und mit manueller Verriegelung für VK- VKS- VC- VVHL und VVHK Füllsystem abgefüllt wurden 7 verschiedene Weinflaschen Flaschen (Muster siehe Foto) mit manueller Scherben- und Fülleraußenabspritzung, manuell angesteuert. mit Desinfektionssprühei ...
item-No.: 139678034
-
250 €
country-de DE
for pre-coated edge material up to 1 mm - front and rear scissor capping - Base
item-No.: 139678032
-
2.250 €
country-de DE
- Planing width 630 mm - 4 knife shaft - motortable stroke - infinitely variable feed - Link pressure bars - 1 table roller - Motor 6.6 kW
item-No.: 139678029
-
165.000 €
country-de DE
D 126 1 Hassia Tiefziehmaschine Verpackung von Butter; Honig Marmelade; Schmelzkäse; Schokocreme: von 15 / 25 / 65 Gramm 12 Portionen pro Takt gefüllt wurden 4 x 3 Einheiten Bei 32 Takten pro Minute (je nach Viskosität des Produktes) Leistung etwa 23.000 Becher/Stunde Maschinen Typ : THM 17 / 24 Nummer : 1071300594 Baujahr : 1994 generalüberholt im Jahr 2015 mit Einpackautomat mit manueller Kartonaufgabe und mit manueller Voll-Kartonabnahme Kartonfüllung: 4 x 12 Portionen mit allen Baut ...
item-No.: 139678026
#908-660 KBA Rapida 74-4 PWHA Size: 52 x 74 cm Age: 2006 Imp.: 27 million Available: October Printing Thickness: 80 - 600 g/m2 - Semi Automatic Plate Change - Ink Temperature Control / Baldwin - Blanket and Impression Cylinder Wash Up Devicr - 2 x Dryer Grafix UV End Dryer - Autom. Size Setting in Feeder and Delivery - Lithek Densitometer - Powder Sprayer AP 232
item-No.: 139678025
#908-660 KBA Rapida 74-4 PWHA Size: 52 x 74 cm Age: 2006 Imp.: 27 Mio. Available: October Printing Thickness: 80 - 600 g/m2 - Semi Automatic Plate Change - Ink Temperature Control / Baldwin - Blanket and Impression Cylinder Wash Up Devicr - 2 x Dryer Grafix UV End Dryer - Autom. Size Setting in Feeder and Delivery - Lithek Densitometer - Powder Sprayer AP 232
item-No.: 139678021
-
252.000 €
country-de DE
C 110 Pos. 1a 1 aseptisch abfüllende Elo-Pak Füllmaschine int. Nr. II 103 gebaut von Fa: Shikoku Typ: U-980 A Serial Nr. 455 Baujahr 2007 mit 3 Format Möglichkeiten, 0,33, 0,5 und 1,0 l Leistung: 11.000 E/h für Fruchtsaft im Einsatz in Betrieb gewesen bis Ende Januar 2019. Die nachfolgenden Anlagen zu der Elopak Linie sind: 3 Reihen Einzelverpackungs-Transportbahnen von Polycetting, Länge bis zur Meuerer Karton- einpackanlage ca. 23 m mit Kurven 3 baugleiche Video Yet Anlagen Modell Nr ...
item-No.: 139678022
-
252.000 €
country-de DE
C 110 Pos. 1 a 1 aseptic working Elopak filling machine int. No. II 103 manufacturer is comp.Shikoku, Japan Type: U-980 A Serial No. 455 Manufacturer year: 2007 with 3 different size of packaging, 0,5, 0,75 and 1,0 l Capacity: 11.000 E/h, juice filling. was working until to the end of January 2019 To the Elopak Line belongs following machines Single transport plant with 3 rows manufacturer is Polycetting, length from Elopak filling machine to the inlet of the Meuerer carton packaging machine ...
item-No.: 139678019
-
19.500 €
country-de DE
C 105 1 Fruchtsaft Platten UHT Anlage int. Bez. II 100 Herst. KHS, Baujahr 2004 Leistung: 9.500 l/h Bis auf den Platten Wärmeaustauscher komplett auf V2A Rahmen gestellt Länge mit Schaltschrank 3,8 m ; Breite 2,10 m, Höhe: höchster Punkt 3,10 m Platzbedarf Gesamtanlage Länge: 6,8 m, Breite 2,50 m Anlage besteht aus: mit 1 Rohr Wärmeaustauscher, Länge 2,2 m, mit Dampf beheizt max. zul. Druck 10 bar Herst ...
item-No.: 139678020
-
19.500 €
country-de DE
C 105 1 Plate heater for fruit juice Capacity: 10.000 l per hour int. No II 100 int. Bez. SIG B3 N13 Plattenerhitzer Manufacturer is KHS Is standing on a frame length with the electronic cabinet: 3,8 m breath 2,10 m high 3,10 m space of the whole plant is Length 6,8 m, breath 2,50 m The plant existing about: 1 pipe heat exchanger, length 2,2 m heat up with steam, with 2 condensate traps Fabr. No. 6191-11, Modul A 1 manufacturer year: 2004 max. al ...
item-No.: 139678017
-
950 €
country-de DE
B 103 1 kleiner stehender Vorlauftank, 1.100 Liter in Nr. int. Nr. B 16 Mannloch oben, nicht isoliert steht auf 3 Füße, Abschlußventile unten montiert 1 Inhalts-Messsonde ist montiert kein Rühwerk, CIP Sprühkugel ist von oben installiert. Einlauf oben, Auslauf unten mittig Herstell Nr. 78278, Inhalt 1.100 l Preis ab Standort, netto: 950,00 Euro
item-No.: 139674116
JSW 850TON WE HAVE JSWINJECTION MOLDING MACHINE, MODEL J850E(850TON), MFG.YEAR 1990 SCREW DIA. 110MM CLAMPING TYPE: TOGGLE TYPE MONITOR: WE HAD CHANGED THE MONITOR ( LANGUAGE IS ENGLISH ) THE CONDITION IS IN THE PRODUCTION. PLS. CONTACT G.J.CHOI IN KOREA HE CAN SERVE YOU AT ANY TIME.
item-No.: 139629227
-
6.200 €
country-de DE
Hackers, crushers, shredders for chipboard and solid wood Only 774 operating hours, i.e. about 10 minutes per day. A video of the running machine can be sent on request. Weima WLV 4 Funnel size, approx. 600 x 500 x 600mm Rotor length 600mm, rotor diameter 368mm Slow-moving water banks 90 rpm Drive motor 15kW Screen diameter top 15mm, bottom 12mm V-wave with 14 knives The knives have recently been completely renewed and can be turned three more times. Suction nozzle 200mm Manual CE mark Without t ...
item-No.: 139629224
-
2.800 €
country-it IT
Year 2012, 988,000 copies done Console with full color touch screen Scan 600x600 dpi or print 1200x1200 dpi Memory 384 Mb x 6 Max size A3 or 11"x17" Max print speed A 4 size : 60 pages/min in 4 colours Large capacity unit LU-202 (2,500 sheets 80 g/m2 ) Dehumid Heater HT-503 for LU-202 Paper type: Plain, Fine, Color Specific, Coated-GL, Coated-ML, Coated-GO, Coated-MO, Tab paper- from 60 to 300 g/m Power 220 volts, 50-60 Hz, Weight 353 Kgs. Many spare toners, Available immediately
item-No.: 139629223
-
14.900 €
country-de DE
Compact edge gluing machine Hebrock F 2 with guide and drawing blade. Only 860 hours, i.e. about 2 hours per week Edge staerke max. 2mm Factory tueckhoehe approx. 10 - 40mm Feed approx. 7m/min Laermschutzhaube extendable factory toct pad Suction connection 1 x 120mm Aggregates: Upper pressure manual adjustment with SIKO-Zaehler Inlet ruler manual adjustment with SIKO-Zaehler Edge staerke manual adjustment with SIKO-Zaehler Fuegefraesen with diafraesers Gluing part with automatic edge f ...
item-No.: 139624642
Emergency power unit according to VDE 0108 regulation. The plant was regularly serviced. The few operating hours were achieved during the respective test runs. IVECO industrial diesel engine for high load connections for generator drive with Bosch in-line injection pump and Bosch speed controller for aggregate operation, built-in electronic speed controller for frequency stability. Three-phase synchronous generator IP 23, brushless version, electronically controlled, basic frame for receiving the motor generator ...
item-No.: 139624639
Nominal force, metric tons 4,000 Slide stroke, mm 400 Number of continuous slide strokes per minute 50 Minimum distance between bed and slide bolster plate, stroke down, mm 1,000 Adjustment stroke, mm 10 Upper knockout: stroke, mm 65 force, tf 8 Lower knockout: stroke, mm 65 force, t 12,5  ...
item-No.: 139624640
Nominal force, metric tons 4,000 Slide stroke, mm 400 Number of continuous slide strokes per minute 50 Minimum distance between bed and slide bolster plate, stroke down, mm 1,000 Adjustment stroke, mm 10 Upper knockout: stroke, mm 65 force, tf 8 Lower knockout: stroke, mm 65 force, t 12,5  ...
item-No.: 139624638
High-performance column drilling machine Make: ALZMETALL Type: AB 4 SV Machine No: 16155 Built: 1982 Offer number: 18248 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Thread cutting device - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with pre-bedding - Level 1 50 - 175 rpm - Level 2 175 - 640 rpm - Level 3 100 - 350 rpm - Level 4 350 - 1280 r ...
item-No.: 139624633
Nennkraft Nominal force kN 40 000 Hub des Stößels Ram stroke mm 400 Hubzahl Number of strokes /min. 50 Einbauhöhe Shut height mm 1200 Stößelverstellung Ram ajustment mm 10 Abmessungen des Stößels Ram dimensions mm 1470 x 1350 Abmessungen des Tisches Bad dimensions mm 1710 x 1620 Oberer Ausstoßer Upper ejector Ausstoßkraft Ejector capacity kN 80 Hub Stroke mm 25 Unterer Ausstoßer Under ejector Ausstoßkraft Ejector capacity kN 300 Hub Stroke mm 10  ...
item-No.: 139624634
Nennkraft Nominal force kN 40 000 Hub des Stößels Ram stroke mm 400 Hubzahl Number of strokes /min. 50 Einbauhöhe Shut height mm 1200 Stößelverstellung Ram ajustment mm 10 Abmessungen des Stößels Ram dimensions mm 1470 x 1350 Abmessungen des Tisches Bad dimensions mm 1710 x 1620 Oberer Ausstoßer Upper ejector Ausstoßkraft Ejector capacity kN 80 Hub Stroke mm 25 Unterer Ausstoßer Under ejector Ausstoßkraft Ejector capacity kN 300 Hub Stroke mm 10  ...
item-No.: 139624631
Capacity, tons …………………………………………….……………… …. 4000 Max ram stroke ……………………………………………………….…… . 400 No of ram strokes, st/min ……………………………………… 50 Maximum distance between table and press ram, mm … 1400 Distance between columns, mm ……………………………….….. 1500 Table size, mm ………………………………………….………………. .. 1120 x 1600 Ram size, mm  ...
item-No.: 139624632
Capacity, tons …………………………………………….……………… …. 4000 Max ram stroke ……………………………………………………….…… . 400 No of ram strokes, st/min ……………………………………… 50 Maximum distance between table and press ram, mm … 1400 Distance between columns, mm ……………………………….….. 1500 Table size, mm ………………………………………….………………. .. 1120 x 1600 Ram size, mm  ...
item-No.: 139624630
SEYDELMANN K-326 - 325 liters - After renovation under warranty - With loading and unloading. - New all components - knives, bearings, sealants, engine, control etc. - 6 months warranty - documentation - Perfect condition We deal with used machines. We make them very accurate capital renovations. We are known for their precision. If you have any questions, please write or call: - biuro@kalteks.pl - 0048-604-500-592 ( de ) - 0048-531-900-299 ( eng )
item-No.: 139624629
Mot.- Pipe bending machine Make: ERCOLINA Type: Super Bender B Machines -No.: 494017 Built: 1994 Offer number: 18230 Technical data: - Bending capacity pipe at 45 kg / mm2 up to 42 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - largest medium bending radius Rm 225 mm - smallest inner bending radius Ri 10 mm - Drive 220 V - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with: - Bending angle preselection - Digi ...
item-No.: 139624624
Energy of blow: 25000 kgs Stroke: 1200 mm Distance between slides: 1070 mm Ram width: 1050 mm Ram length: 1500 mm maximal number of strokes per minute: 80 Average number of strokes per minute: 8 Weight  ...
item-No.: 139624622
Maximum impact energy (p=9 bars) 480 KJ Maximum ram stroke 1150 mm Distance between guides 1220 mm Work cylinder diameter 1030 mm Diameter of distribution valve 400 mm Length x width of the fixing support of the die 1800 x 1400 mm Total weight of the hammer 458 ton - Subject to prior sale - - W ...
item-No.: 139624619
Machine specification Year: 2006 Control unit: Unilog B4 Injection Unit: .../2800 Screw diameter: 75 mm Injection pressure: 1739 bar Injection volume: 1657 ccm Shot capacity: 1508 g Clamping Unit: TM 450/... Clamping force: 450 t Platen size: 1120 x 1120 mm Distance between tie bars: 800 x 800 mm Mould height: 300...770 mm Opening storke: 760 mm Max.Daylight: 1530 mm Ejector stroke: 250 mm General information: Delivery time: Now Machine dimensions(m) LxWxH: 8,26 x 1,79 x 2,3 ...
item-No.: 139624616
Trockenrückkühler MTA RWD 350SC Kühlwasser-Rückkühler RWD 350SC sind für Außenaufstellung geeignet. Kühlregister aus CuAl (Kupfer/Aluminium). Inklusive: Filter für Wärmetauscher, EC-Ventilatoren und Elektrische Steuerung und nur Reparaturschalter. Rückkühlleistung kW : ca 306 Kültwassertemperatur Austritt/ Eintritt: 40 / 45 °C Volumenstrom m³/h: 58,29 Umgebungstemperatur °C: 35 Kühlmittel Wasser-Glykohlgemisch 35% Daten laut Typenschild: Elektrischer Anschluss (V/Ph/Hz): 400/3/50 ...
item-No.: 139624617
Drycooler MTA RWD 350SC Air Blast Cooler RWD 350SC are suitable for outdoor installation. Cooling register made of CuAl (copper/aluminium). Includes: Filters for heat exchangers, EC fans and electrical control and repair OFF-switches. Recooling capacity kW: approx. 306 Coldwater temperature outlet/ Inlet: 40 / 45 °C Volume flow m3/h: 58.29 Ambient temperature °C: 35 Coolant Water-glycocoal mixture 35% Data according to the nameplate: Electrical connection (V/Ph/Hz): 400/3/50 Current consumption ma ...
item-No.: 139624613
-
49.000 €
country-se SE
Bedingung: Gebrauchte technische Daten: 3445x2815x1600 mm; 325 Liter Fassungsvermögen der Schüssel; 6 Messer; 50 Hz; 230 kg Abfüllmenge, je nach Produktion; , je nach Produktion; , je nach Produktion; Messerwellengeschwindigkeiten schneiden 500-4400 Umdrehungen pro Minute; - Messerwellengeschwindigkeiten, die rückwärts 50-500 Umdrehungen pro Minute mischen; . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
item-No.: 139624612
-
49.000 €
country-se SE
Condition: Used Technical data: • overall dimensions 3445x2815x1600 mm; • bowl capacity 325 litres; • 6 knives; • power 97 kW; • power supply 400 V, 50 Hz; • filling amount 230 kg, depending on production; • capacity 1150 kg/h, depending on production; • knife shaft speeds cutting 500-4400 rpm; • knife shaft speeds mixing forward an reverse 50-500 rpm; • bowl speed 7-22 rpm; • hydraulic cover control; • vacuum pump excluded; • weight 5200 kg.
item-No.: 139624396
Pelletizer type Buhler DPAA - compact pelletizer housing mounted on base frame - pelletizer door of stainless steel, powerful permanent magnet. - rotating the system with V-belt drive 160 kW - two-roller system (1 set on pelletizer) - the pelleting with internal dia. 660 mm and pelleting width 154 mm - 1 Automatic Greasing Unit for roller and rotor bearings (new) - greasing pump incl. 0.18 kW three-phase motor and 10 kg grease tank (new) - variable grease supply to greasing points with electrical control ...
item-No.: 139624387
Pelletizer type Buhler DPAA - compact pelletizer housing mounted on base frame - pelletizer door of stainless steel , powerful permanent magnet. - rotating die system with V-belt drive 160 kW - two-roller system (1 set on pelletizer) - die pelleting with internal dia. 660 mm and pelleting width 154 mm - 1 Automatic Greasing Unit for roller and rotor bearings (new) - greasing pump incl. 0,18 kW three-phase motor and 10 kg grease tank (new) - variable grease supply to greasing points with electrical contro ...
item-No.: 139624388
Pelletizer type Buhler DPAA - compact pelletizer housing mounted on base frame - pelletizer door of stainless steel, powerful permanent magnet. - rotating the system with V-belt drive 160 kW - two-roller system (1 set on pelletizer) - the pelleting with internal dia. 660 mm and pelleting width 154 mm - 1 Automatic Greasing Unit for roller and rotor bearings (new) - greasing pump incl. 0.18 kW three-phase motor and 10 kg grease tank (new) - variable grease supply to greasing points with electrical control ...
item-No.: 139624385
-
11.500 €
country-de DE
Preis: 11.500€. FCA frei aufgeladen in D-Bergisch Gladbach. Zum Verkauf steht ein gebrauchtes 180 KW MAN E2842 Gas BHKW aus 1992. Lieferumfang: Schaltschrank, Abgasschalldämpfer, Abgaswärmetauscher, Öl Tank. Marke: MAN Typ: E2842 Elektr. Leistung: 180 KW Baujahr: 1992 Spannung: 400 V U/min: 1500 U/min Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach
item-No.: 139624379
Taurus pellet mill | excellent design based on 30 years of knowledge Over the past 30 years, our company has gained tremendous knowledge and experience in the day-to-day operation and maintenance of all types of pellet mills. During that time, we saw a clear need for further improvement of these machines in the animal feed, biomass and recycling industries, so we drew on our extensive knowledge of pellet mill refurbishment to develop a new pellet mill. Our goal was to develop a pellet mill suitable for pellet ...
item-No.: 139624380
Specifications: Size: (length x width x height) :1,700mm x 2,000mm x 2,000mm Weight (inclusive rollers and the):10,100 kg Paint RAL: Black: 9005 Orange: 2008 Silver grey: 2007 Motor (IE3) :2 x 132 kW : 980 / rpm : 3x 400/690V 50Hz Shaft & rear plate (one piece) : x 200mm / 42cRM04 Bearings [SKF] : Front: NU 23240 cc/w32 Rear: NU 23236 cc/w33 Rotor pulley : x 1400mm Motor pulley : x 220mm Rotation Rotor: 154 rpm-6.85 meters / sec
item-No.: 139624375
-
12 €
country-de DE
Wir bieten Ihnen hier einen gebrauchten Pfostenschutz des Herstellers BITO (PRO) zum Kauf an. Die Ständerschützer sind ausgelegt für eine Rahmenprofilbreite von 80 mm. Im Lieferumfang sind enthalten: 01x Pfostenschutz, gebraucht Materialfarbe: gelb f. Ständerprofilbreite: ca. 80 mm Gesamthöhe: ca. 715 mm Gesamtbreite: ca. 90 mm Innenbreite: ca. 82 mm Gesamttiefe: ca. 70 mm Höhe Abweiser: ca. 40 mm Materialstärke: ca. 4 mm Lochraster: ca. 50 mm  ...
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)