Edge gluing machines used for sale (37)

Edge banding machine Brandt type KDF 670 Technical data: - Inlet ruler: manually adjustable - Joining milling unit with 2 motors each 2.2 kW: both motors pneumatically controlled - Hot melt glue manga - Pressure zone: with 1 main pressure roller and 3 post-press rollers - Cross-cut unit with 2 motors each 0.35 kW: automatically adjustable via program from chamfer caps to straight caps - Edge milling unit with 2 motors each 0.55 kW: for flush milling, chamfer milling or radius milling with 4-way fixed point adjustment for side scanning - Groove milling unit: with horizontal shaft - Copy milling unit with 2 motors each 035 kW: with pneumatic control in and out - Profile scraper unit: with pneumatic input and output control - Flat-pulling blade unit - Buffing unit

• Edgebander • Serial number 8657401 • Total installed power approx, 31 KW • Edge thickness from 0,40 mm up to 8 mm • Worpiece thickness from 8 mm up to 40 mm • Minimum workpiece lenght 120 mm • Minimum workpiece width 120 mm • Feed speed 16 m/min • Feed motor 2,20 KW • Control • Joint trimming unit, 2 x motors • Edge feeder for strips and roll, edge magazine for one edge coil • Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+3) rollers • End trimming unit, 1 x motor 0,45 KW-12000 rpm • Rough trimming unit, 1 x upper motor 1,12 KW-12000 rpm • Profile trimming unit, 2 x upper motor 1,00 KW-12000 rpm, 2 x lower motor 0,30 KW-12000 rpm • Profile scraping unit • Edge buffing unit, 2 x motor 0,37 KW-1500 rpm • Milling group, motor 3 KW • Operating conditions of this machine: unchecked. • This item is delivered loaded  ...

SCM edgebander model BASIC 1 : – useful panel thickness from 8 to 40 mm – forward speed 8 mt/min – overall dimensions about 1.7 x 0.7 x h=1.3 m Operating units: – gluing with hot-melt glue tank – loader and shearing for roll material – Trimmer KW 0.6 – Trimming machines KW 0.5+0.5 Machine operating at pick-up in trade-in, with track feed gearbox recently replaced. Not in accordance with CE regulations, but with a safety switch on the cabin opening.

• Edgebander • Serial number 515/0-007 (2000) • Edge thickness in strips up to 13 mm • Edge thickness in roll from 0,40 mm up to 5 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 1,50 KW • PLC control system • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1912 pressure group with (1+1) rollers • HOLZ-HER 1918 end trimming unit, 2 x motor 0,22 KW-9000 rpm, tilting up to 10° • HOLZ-HER 1942 M fine trimming unit, 2 x motor 0,60 KW-18000 rpm, tilting up to 15° • HOLZ-HER 1929 profile scraping unit • HOLZ-HER 1940 edge buffing unit, 2 x motor 0,12 KW-1340 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are s ...

Edge thickness 0.4 - 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min

- Total installed power approx. 20 KW. - Thickness of the edge in strips from 0.60 mm to 25 mm. - Thickness of the edge in roll from 0.30 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum width of the piece 65 mm. - Adjustable feed speed from 8 m/min to 30 m/min. - 5.50 KW advance motor. - CNI PIC 200 control. - Input spindle moulder group, 2 x motors. - Edge loader for slats and roll, edge tray for one roll. - VC34 QMS gluing unit with tank for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group, 2 x 0.33 KW-12000 rpm motor. - Straight roughing group, 2 x 1.03 KW-12000 rpm motor. - Spoke profiling unit, 2 x motor, tilting. - Shape group, 4 x 0.33 KW-12000 rpm motor. - Milling unit tiltable from 0° to 90°, motor from 2.20 KW-12000 rpm. - Radius scraper group. - Tail scraper group. - Cleaning br ...

Homag modular unit, edge processing machine, shape milling unit, format processing unit, cutting unit, grooving unit, milling unit, joining milling unit, double-end profiler, milling motor for edge processing machine --HOMAG universal milling unit --with heavy dovetail guide --Milling unit: swivel --1x Motors Perske --Motor Type: KNS 51 15/4 --Power: 2.2kw --Voltage: 220/380/380 volts --Frequency: 300Hz --Speed: 8700 rpm --Dimensions: H750/W440/D440 mm -- without milling head

- Semi-automatic machine for the application of rubber edges with a \"T\" section on panels of different shapes and dimensions without the aid of counter-templates. - Retractable cutting device. - Applicator with vibration so as not to damage the edge surface. - Heater to facilitate application operation. - Retestador. - Total installed power 6.02 KW. - Thickness of the pieces from 10 mm to 30 mm. - Feed speed 5 m/min. - Table dimensions 1050 x 800 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-52

Mold Processing Unit, Milling Unit, Mold Milling Unit, Double End Profiler, Edge Processing Machine, Milling Motor for Edge Processing Machine -HOMAG milling unit with Perske motors -with keying of 2 sides each -Milling unit: swivelling -1x Motors Perske VS 3006/2 -Power: 0.6 kW -Voltage: 165 volts - Frequency: 300 Hz -Speed: 17,300 rpm -1x Engines Perske VS30.06/2 -Power: 0.3 kW -Voltage: 165 volts - Frequency: 300 Hz -Speed: 17,300 rpm -Dimensions: H600/W480/D500 mm

- Strip edge thickness from 0.40 mm to 12 mm. - Thickness of the edge in roll from 0.40 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed rate. - IDM PC OFFICE control. - Entrance spindle moulder group. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group. - Spoke profiling group. - Shape group with 2 motors. - Milling unit tiltable from 0° to 90°, 4 KW motor. - Radius scraper group. - Tail scraper group. - Group of cleaning brushes. - LEISTER hot air blower group. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-59

Undercarriage for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). But it certainly also fits on other machines, e.g. Brandt (might have to be adjusted a bit) Length of the U-profiles approx. 1130mm Body height incl. castors approx. 150mm 4 sturdy steel castors as swivel castors with grease fittings 2 Brakes 2 support plates for height compensation The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

• Edgebander • Serial number 10347 • Edge thickness in strips up to 12 mm • Edge thickness in roll up to 3 mm • Worpiece thickness up to 40 mm • Adjustable feed speed from 5 m/min up to 25 m/min • Feed motor 5,50 KW • Joint trimming unit, 2 x motor 3 KW • Edge feeder for strips and roll, edge magazine for 6 edge coils • Gluing unit for PUR glue • Pressure group with (1+5) rollers • End trimming unit, 2 x motor • Rough trimming unit, 2 x motor 1 KW • Profile trimming unit, 4 x motor • Profile scraping unit • Flat scraping unit • Edge buffing unit • Milling group • IMPORTANT: • The return system shown in the photographs is NOT included. • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-60

SPECIFICATIONS: Workpiece thickness: min. 6 mm - max. 45 mm Edge thickness: max. 3 mm Feed: 8 m/min COMPOSIZIONE: Gruppo rettifica Gruppo colla Gruppo pressore Gruppo intestatore doppio Gruppo raschia colla Gruppo refilatore Gruppo arrotondatore Gruppo raschiabordo Gruppo spazzole

• Edgebander • Serial number 8667702 • Total installed power 22 KW • Edge thickness from 0,40 mm up to 3 mm • Worpiece thickness up to 50 mm • Minimum workpiece lenght 120 mm • Minimum workpiece width 120 mm • Feed motor 1,47 KW • Control • Edge magazine for one edge coil •  Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+3) rollers • End trimming unit, 1 x motor 0,37 KW-12000 rpm • Profile trimming unit, 4 x motor 0,37 KW-12000 rpm • Profile scraping unit • Edge buffing unit, 2 x motor 0,37 KW-1370 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-190

IDM manual edgebanding machine for shapes model KOMPACT according to CE standards

- Total installed power 8.80 KW. - Edge thickness from 0.40 mm to 16 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum length of the piece 140 mm. - Minimum width of the piece 60 mm. - Adjustable feed speed from 10 m/min to 20 m/min. - 1.50 KW advance motor. - Control. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x 0.50 KW-12000 rpm motor. - Spoke profiling group, 2 x motor at 12000 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-6

AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit ...

- Edge thickness from 0.40 mm to 2 mm. - Thickness of the part from 10 mm to 45 mm. - Minimum piece width 90 mm. - Feed speed 6 m/min. - Retestador group. - Spoke profiling unit. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-21

AUTOMATIC EDGE BANDER machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner technical data : min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin composition : gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n ...

• Edgebander • Serial number 14589/9-810 • Total installed power approx, 9 KW • Edge thickness from 0,40 mm up to 8 mm • Worpiece thickness from 6 mm up to 45 mm • Minimum workpiece lenght 180 mm • Minimum workpiece width 60 mm • Feed speed 11 m/min • Feed motor 0,75 KW • Control • HOLZ-HER 1902 edge feeder for roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • HOLZ-HER 1913 pressure group with (1+2) rollers • HOLZ-HER 1976K end trimming unit, 2 x motor 0,22 KW-9000 rpm • HOLZ-HER 1942M fine trimming unit, 2 x motor 0,60 KW-9000 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-23

Frama MDC 1300 roller glue applicator Working width 1300mm Working height 70mm Feed speed 16.5m/min 0.3kw feed motor CE Certified Year of production 1999 Weight 332kg

• Edgebander • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Adjustable feed speed: 8 m/min - 20 m/min • Control • Joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for strips and roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • Pressure group with (1+2) rollers • End trimming unit with 2 motors • HOLZ-HER 1823 fine trimming unit, 2 x motor 0,60 KW-12000 rpm • Profile scraping unit • HOLZ-HER 1983 profile trimming unit • Edge buffing unit • Milling group, motor 3,80 KW-12000 rpm • Sanding belt unit • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-84

PART NUMBER: 7531 Specifications: Equipment: -plate - Tape feeder -guillotine - glue tank (granules) - 3 pressure rollers - Ready-to-use saw-cutting unit - 2 trimming units for edge shaping (radial cutters) - 2 polishers - min workpiece length 140mm - min workpiece width 60mm - thickness of the veneered element 10-55mm - edge tape thickness 0.4-3mm - steady rest sliding out of the top - motor power 5.6kW - extraction spigot diameter 120mm - dimensions length/width/height 3480x1050x1020mm - weight about 900kg Advantages: – unpainted – made in Austria – very good condition – used edgebander Net price: 18900 PLN Net price: 4395 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

- Edge thickness from 0.40 mm to 20 mm. - Thickness of the workpiece from 12 mm to 60 mm. - Minimum length of the piece 150 mm. - Minimum width of the piece 55 mm. - Adjustable feed speed from 18 m/min to 24 m/min. - HOMATIC NC 21 control. - Input spindle moulding group, 2 x 3 KW-9000 rpm motor. - Edge loader. - Gluing unit with boiler for granulated hot melt adhesive QUICK MELT A20. - Pressure group with (1+6) rollers. - HL 83 cross-cutting group, 2 x 0.40 KW-12000 rpm motor. - Straight roughing group, 2 x 1.50 KW-12000 rpm motor. - FK 13 shape group, 2 x 0.55 KW-12000 rpm motor with 8-position tool change each. - Radius scraper group. - FS 40 cleaning brush group, 2 x 0.25 KW-2800 rpm motor. - LIGMATECH ZHR 15/11/LI return system: year of manufacture 1997, serial number 0-305-09-2708. - Operating conditions of this machine: unchecked. - This item is delivered loaded b ...

IDM edgebander model ACTIVA GP-R2: – MAGELIS electronic control with video – usable panel thickness from 10 to 60 mm – thickness of edges in rolls from 0.4 to 3 mm – Thickness of solid edges up to 12 mm – 2 feed speeds 12-18 mt/min – upper presser with wheels – motorized adjustment of the upper presser – machine according to CE regulations, year 2004 Operating units: – grinding unit with 2 motors – anti-adhesive unit, with nozzles for liquid – IR lamp for panel preheating – gluing unit with glue tank and upper pre-melter (3 interchangeable glue tanks are supplied) – double tilting trimmers – tilting trimmers – 2-motor rounding unit – PVC/ABS edge scraper unit – glue scraper unit – brush unit

Machine: Edge gluer Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 45 mm (pneumatic package up to 8 mm) Min. workpiece length: 160 mm Feed speed: 10 m/min Weight: 1055 kg Composition: pre-milling, gluing system, 3-roller pressure zone, end cut and flush cutting motors, shape scraper + surface Control: Tilt and tilt panel Auction-ID: A1-45443-25

The machine is designed for automatic gluing of various types frames and profiles covered with foil, varnished or otherwise finished in the shape of rectangular or polygonal. The material of MDF frames glued together. The machine is dedicated to the production of picture frames and finishing frames in doors. Fully automatic work cycle. Max. slat size: -width 120 mm -height 65 mm -minimum element length 250 mm -capacity about 100 sets. Frames The device is suitable for hot melt adhesive. The dimensions of the device are 1100 x 850 x 1300 mm. Weight 160 kg Pneumatic system 6 bar.

SCM ME35 Edge Banding Machine8–50 mm panels, 0.4–2 mm edges. Min. length 190 mm, min. width 110 mm. Forward speed 7 m/min. Belt training, edge dresser, pneumatic cutter, 1 kg bin gluing, 2 roller marouflage. Ø125 mm 12000 rpm butt cutter, top/bottom flush, straight scrapers and radius. Siko digital meters. Suction Ø60–80 mm. Total power 19 A. Weight 550 kg. Dimensions 3315 × 1450 × 1300 mm. Auction-ID: A1-45443-65

Edge banding machine Cehisa SYS 5PS - Only about 60 km edges glued / little used! - Condition tiptop - Sturdy construction all important aggregates available: - Infeed ruler - Joining milling - Preheat plate - Glue application - Apply edges (rolls or strip magazine) - Pneumatic pressure roller driven - Pressure roller on top, spring-loaded - Pressure roller at the bottom, spring-loaded - Caps front & rear - Flush milling top and bottom - Copy corners front and back -Scraper - Schwabbelscheibe Accessories: -Tool - Feed rollers for various edge materials - various spare blades - Settings folder Year of construction 2008 Masch. No. 532 The machine is approx. Available at the beginning of October (probably earlier) and would then have to be picked up on a fixed date. Disassembly and collection by buyers The machine is in top condition, ready for  ...

- Total installed power 31 KW. - Edge thickness in rolls from 0.4 mm to 3 mm. - Edge thickness in rolls from 0.4 mm to 25 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed speed from 10 m/min to 25 m/min. - PC Office control. - Input spindle moulding group, 2 x 4 Kw-12000 rpm motor. - Edge loader for 1 roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+6) rollers. - Cross-cutting group with 2 motors of 0.35 KW-12000 rpm. - Straight roughing group, 2 x 1.03 KW-12000 rpm motor. - Spoke profiling group, 2 x 0.55 KW-12000 rpm motor, tiltable up to 45°. - Spoke profiling group, 2 x 0.35 KW-12000 rpm motor, tiltable up to 45°. - Shape group with 4 motors of 0.35 KW-12000 rpm, with quick release of the motors. - Radius scraper group. - Tail scraper group. - Cleaning brush group, 2 x 0.30 KW-1500 rpm m ...

SCM edge bander model BASIC 1 : - useful thickness of the panel from 8 to 40 mm - feed speed 8 mt/min - overall dimensions approx. 1.7 x 0.7 x h = 1.3 mt Operating groups: - gluing with hot melt glue tank - loader and shearing for roll material - Header kW 0,6 - Trimmers kW 0,5+0,5

• Edgebander, edge banding machine • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Minimum workpiece lenght 140 mm • Minimum workpiece width 60 mm • Adjustable feed speed from 8 m/min up to 20 m/min • Feed motor 4,40 KW • HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for 1 edge coil, edge magazine for 1 edge coil • HOLZ-HER 1907 cartridge glue system with pot for granulated hot melt adhesive • HOLZ-HER 1926 K pressure group with (1+2) rollers • HOLZ-HER 1819 snipping unit, 2 x motor 0,45 KW-12000 rpm • HOLZ-HER 1962 rough trimming unit, 2 x motor 2 KW-12000 rpm • HOLZ-HER 1934 lower profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1933 upper profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1927 profile scraping unit • HOLZ-HER 1964 flat scraping unit • HOLZ-HER 1944 ed ...

Hebrock Edge gluing machine Edge glue Edge milling machine heating Capping

Edge gluing machine

Edge glue machine HolzHer express 1437 Edge gluing, flush milling, caps flush milling with chamfer milling or RADIUS milling with sep. Aggregate Schwabelscheiben 2 mm and two units for chamfering or just milling milling ABS edge 2 additional units for RADIUS Hours of operation 1072.5 hours Masch. No. 721/9-203 L x W x H: 400 x 120 x 170 cm Weight approx. 900 kg Built in 1992 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Machine is still in < operation and fully functional solid up to 20mm rolls PVC to 3 mm caps flush milling RADIUS milling milling Schwabbleln chamfer

Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12