58 BRANDT used machine for sale

Excellent condition - Fully operational - Loading / Transport possible! Control POWER CONTROL PC 20 PLUS Infeed ruler with motorized single-axis-adjustment Top pressure beam with motorized height adjustment Edge magazine single Jointing cutter unit Cross-cut saw unit 2-motor Profile cutter unit top/bottom with multiple roller scanning Form cutter unit 1-motor Profile and flat scraper unit Buffing unit Edge thickness 0.4 - 8 mm Workpiece thickness 8 - 60 mm Feed 8 - 14 m/min joint trimming unit 2 x 2.2 KW snipping unit 2 x 0.18 KW rough trimming unit 2 x 0.55 KW

Excellent condition - Fully operational - Loading / Transport possible! BRANDT KDF 220 HIGHFLEX Edge Banding Machine with Joint Trimming Unit - Jointing cutter unit - Edge Magazine Single - pressure rollers 3 pieces with pneumatic 2-point adjustment - cross-cut saw unit with pneumatic adjustment CHAMFER/STRAIGHT - profile cutter unit pneumatic CHAMFER / RADIUS / STRAIGHT - Form Cutter Unit One motor - profile scraper with quick-change heads - flat scraper edge magazine with 1 -fold roller edge thickness 0.4 - 6 mm Workpiece Thickness 8 - 60 mm Feed 11 m/min Joint Trimming Unit 2x 2.2 KW Gluing Unit A6 Snipping Unit 2x 0.18 KW fine trimming unit 2x 0.27 KW Profile Trimming Unit 1x 0.35 KW / WD 40 flat scraping unit yes profile scraping unit yes control EASY CONTROL EC 10+

Edge banding machine Brandt type KDF 670 Technical data: - Inlet ruler: manually adjustable - Joining milling unit with 2 motors each 2.2 kW: both motors pneumatically controlled - Hot melt glue manga - Pressure zone: with 1 main pressure roller and 3 post-press rollers - Cross-cut unit with 2 motors each 0.35 kW: automatically adjustable via program from chamfer caps to straight caps - Edge milling unit with 2 motors each 0.55 kW: for flush milling, chamfer milling or radius milling with 4-way fixed point adjustment for side scanning - Groove milling unit: with horizontal shaft - Copy milling unit with 2 motors each 035 kW: with pneumatic control in and out - Profile scraper unit: with pneumatic input and output control - Flat-pulling blade unit - Buffing unit

! the regression shown in the photos is not included Equipment: - Electronics control power control PC 20+ - PU top pressure rollers - Motorized height adjustment upper pressure - Hood interior lighting - Infeed ruler adjustable and extended by program - Program adjustment pressure zone - Quickmelt application unit - Autom. Edge retraction - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, with pneum. 2-point adjustment - Pre-milling unit 2 x 0.55 kW - Milling unit 2 x 0.55 kW, with program Adjustment to edge thickness and multi-roller scanning - Shape milling unit top+bottom, 2 x 0.35 kW - Scraper blade with quick-change heads with additional device for pointed workpieces - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit 2 x 0.18 kW - Interface electr./mech. for Ligmatech ZHR01 ...

Used machine Without pre-milling Edge Caps Front/Rear Milling Rounding Top/Bottom Milling Rounds Front/Rear Scraper Blade: Top/Bottom Polishing Top/Bottom

Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 220 C, built in 2014: Configuration: Input stop manually adjustable Manually adjustable joint milling Edge banding EVA glue / PUR glue possible Material pressure zone manually adjustable Cross-cut saws pneumatically adjustable Radius milling at the top + bottom manually adjustable Round unit 1-motor manually adjustable Radius scraper R2 can be adjusted pneumatically (set R1 included) Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Length including feed plate 4150mm Weight 1320kg Very good condition, fully functional ! Including full documentation and CE. Available the same.

I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...

Shape milling machine Brandt type FP 10 Specifications: • Year of construction: 1989 • Workpiece thickness max. (mm): 55 • Workpiece width min. (mm): 80 • Profile depth max. (mm): 80 • Inner radius min. (mm): 10 • Edge material thickness max. (mm): 3 - depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm. • Electrical: 220 V - 1 Ph. - 50 Hz • Power supply (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Working table height (mm): 1000 • Swabing unit: for processing thick PVC edges • Weight (kg): approx. 120

Postforming machine in cycle Brandt type PF 20/31 Specifications: • Working length max. (mm): 3100 • Profile height max. (mm): 200

Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg

for bill of exchange order unit

• max workpiece thickness: 55 mm • min. workpiece width: 80 mm • max profile depth: 80 mm • max edge thickness: 3 mm • Table size: 800 x 380 mm • Foot pedal operation • Adjustment via mechanical counters • Weight approx. 120 kg (Changes and errors in the technical data and prices reserved!)

- with lateral Kappsaege

Working piece thickness (Radius) ca. 16 - 55 mm Working piece thickness (Chamfer) ca. 12 -55 mm Working piece width min. Ca. 30 mm Inner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours) Edge thickness max. ca. 3 mm Milling motor 2 x 0,4 kW, 10950 o/min. Dust extraction 1 x diam. 80 mm Working height 900 mm Radius 3 mm tooling

Min/Max. workpiece length 1800 / 4200 mm. Max. profile height 200 mm. Min. Workpiece thickness 16 mm Working height 950 mm. Power installed 12 kW

Min/Max. workpiece length 1800 / 4200 mm. Max. profile height 200 mm. Min. Workpiece thickness 16 mm Working height 950 mm. Power installed 12 kW

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Manufacturer: Brandt Type of Machine : Edge Banding Machine Model: KDF 220 Year of Manufacture: 2012 Technical Specifications - Supply Voltage: 400Y/230V - Phases: 3-Phase - Frequency: 50 Hz - Fuse: 16 A - Maximum Operating Full Load Current: 14 A - Short Circuit Current Rating: 5 kA rms symmetrical - Control Voltage: 24 V - Largest Motor: 4.5 A - Largest Heater: 2.4 A - Enclosure Type: 1 Find more here - / Contact us at -

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: Brandt, Type: KE 22 F, Year: 1991, Edgeband thickness max mm: 20, Edgeband height max mm: 55, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Work piece thickness min mm: 150, Coil magazine: yes, Feeding speed max m/min: 7-25, Machine lenght mm: 10000, Compressed air bar: 6, Premilling: yes, Strip magazin: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Buffing unit: yes, Glue system granulate/cartridge: Granulat, Top pressure belt/roller: Rolle, KS 10 Bandschleifaggregat für Funier oder Massiv, Year :1991