used Continuous gluing systems for sale

Bagel Machine / Bagel Machine Weight range 8" 60-85g /// 9" 85-130g ( max. 3600 pieces/hour ). New machine

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Aasted Type: AT 2000 disc tempering machine for chocolate YOM: 1971 output: from 750 to 2.000 kg/hour. electrical: 380/400 VAC different: working order I offer this machine in as-is where-is condition

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

Stock number: 3772 WELDING ROBOT Manufacturer: ABB ROBOTIC, Type: IRB 2400 L- 6 axis Machinen NR.: 24-12947, YOC: 1999 Specifications: ROBOT TYPE ABB IRB2400 x 2 Ansahl Aschsen 6 pcs. weight 1-5 kg Working range 3421 mm Control abb Fabr. Accessories Manipulator Model IRBP 250 K Rotary table 250 mm

Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned obj ...

Accu-Sort Axiom-X 2L Barcode ScannerRA2283Manufacturer: Accu-SortModel: Axiom-XNumber of lasers: 2Maximum scans per second 1120 SPSVoltage: 230V AC (12-30V DC) , 24V outputSize L 311 mm x W 354 mm x D 176 mmWeight of scan head 6.6 kg Mounting bracket: 1.9 kgCable base 0.8 kg Power supply unit 1.1 kgHousing Powder-coated cast aluminum, high-impact plastic, protection class IP54Operating temperature: 0° to +50° CStorage: -20° to +70° CRelative humidity 10% - 90% non-condensingLaser type Visible laser diode 650 nM (standard)Power consumption < 40 WOptical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs)Barcode types All standard 1D symbologiesConnections Dedicated setup connection, optional RJ45 connection for EthernetCommunication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relaysCommunication Optional D ...

Order No. 6761 TECHNICAL DATA 6 hydraulic cylinders: - 4 upper - 2 side - max. length of glued elements 3100mm - max height of glued elements 1600mm - pump motor power 1.5kW - dimensions length / width / height 4320x1500x1120mm - weight kg ADVANTAGES - unpainted - possibility of gluing in vertical and horizontal position - used press - very good condition PRODUCT FEATURES The press is designed for assembly of all rectangular frame structures, e.g. doors, windows of various dimensions. An additional hydraulic cylinder is responsible for the possibility of gluing in the vertical and horizontal position. Net price: PLN 18 900 Net price: EUR 4021 Net price, calculated at the rate of 4.70 PLN / EUR (with greater fluctuations in the rate, the price may change)

The Aerzen blower unit, which was manufactured in 1986, is a reliable and powerful solution for various applications. With an operating pressure of 1.05 bar, it provides the necessary compressed air for industrial processes, ventilation systems or other applications. The blower unit has been carefully manufactured and is characterized by its durable construction and efficient performance. It is designed to generate high airflows while maintaining stable operating pressure. We would like to assure you that we can offer you the best possible price for this blower unit. The price is negotiable, so we can respond flexibly to your requirements. If you would like more details about the blower unit or have any questions, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries promptly. Contact us today to learn more about this Aerzen blower  ...

Cooler as seen in photos

High quality oil-free compressor, great for heating systems, workshops, service stations, spray painting and many other applications. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro100-3 230V: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 1Ph 230V Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 68  ...

AFS 4000 Air Purify AFS 4000 Air Purify all separation and filter elements as well as with connection for cooling lubricant recirculation Air capacity:4,000 m3/h Device suction capacity Rated electrical data: 3, 380...480 V, 50/60 Hz2.68 kW, 4.1 A, Power consumption:2.2kW, operating point Weight:approx. 150kg Dimensions 800mm wide 1800mm long incl intake nozzle1050mm high Suction mares 4 pieces each approx. 200mm diameter Suction nozzle shut-off valve diameter 150mm

4 up Thermal Agfa Acento E Year 2005 With Harlequin Rip Price: on request

4 up thermal CTP Manufacturer: Agfa Model: Acento-S Built 2006 size 660 x 830 mm Min. size 324 x 370 mm Autoloader Inline punch Stacker Chemical free Include Rip (Apogee 8) + Software Price: on request

4 up Thermal CTP Agfa CTP (Thermal) Model: Acento-S Built: 2006 size 660 x 830 mm Min. size 324 x 370 mm Autoloader Inline punch Stacker Chemical free Include Rip (Apogee 8) + Software Price: on request

Thermal CTP AGFA Avalon LF year 2007 73,000 sqm produced with AGFA Apogee Prepress Manager Price: on request

Thermal CTP AGFA Avalon LF S year 2006 with AGFA Prepress Workflow Price: on request

4 up thermal CTP AGFA Avalon N4 year 2010 with AGFA Apogee RIP with Cleanout unit 46.000 plates produced

8 up Thermal CTP Avalon N16–50 XT med MAL 3 kas. Punch system Bacher 780 Avalon N16, Jan 2010 MAL, Apr 2010 Elantrix 125, march 2009 Life time plates 278218 p Lifetime running 105212 h Actual running time 11096 h Exposure time 4647 h LD Status Reserve (U) 83 Current (U) 23 Reserve (L) 26 Current (L) 23 LD (U) replaced 25, march 2022 Under AGFA Service since installation Price: on request

with skid (pallet) auto-loader for pallet processing incl. two bases for picking up the pallets, maximum panel format 1,750 x 1,400 mm, minimum panel format 650 x 550 mm, Resolution 2,400 dpi, Inline punching system, Optionally, an Arkana 150 development machine (built in 2020) and Parts of a Nela SF-Bender panel automation system (built in 2020), transport and installation worldwide, Price on request

4 up thermal CTP AGFA Avalon N4 year 2010 with AGFA Apogee RIP with Cleanout unit 46.000 plates produced

4 up thermal CTP AGFA Avalon N4 year 2014 32 diodes with AGFA Apogee RIP Price on request

4 up Thermal CTP Manufacturer: Agfa Model: Avalon N4 10S Year: 2012 Platesetter Architecture: external drum Laser technology: 830mm infrared thermal Light source: 32-channel infrared laser diodes Image area: Maximum 830mm x 633mm (front margin 15mm, rear margin 12mm) Resolutions: 1200-2400dpi Plate Sizes: Maximum plate: 830mm x 660mm Minimum plate: 324mm x 370mm (standard) 304mm x 370mm (optional) Thickness: 0.15mm to 0.3mm AGFA ELANTRIX 95SX Processor Plate width min-max: 200x950mm Plate length min: 300mm Plate thickness min-max: 0.15-0.4mm Procesing speed: 10-160cm/min Throughput: 58pl/hr(portrait 745x605mm) 44pl/hr(portrait 1030x790mm) Tank content, developer: 57l Tank content, wash: 40l AGFA ELANTRIX ST95EX PLATE STACKER Price: on request

4 up thermal CTP AGFA Avalon N4-30X with L300 Platemanager year 2019 ONLY 200 plates produced Price: on request

8 UP Thermal CTP Avalon N8 50 XT year 2008 250,000 plates produced MAL 4 cassettes, 2 punches bacher 425W 780W bridge Arkana 125 online-processor ethernet to PIF interface Price: on request

VLF Thermal CTP AGFA Avalon VLF Model: AGFA Avalon 50 XT size: 120 x 160 cm year: 2006 with AGFA Platemanager with AGFA Cleanout unit with Tiff shooter Price: on request

Thermal CTP VLF AGFA AGFA Avalon VLF 70 xxt Elite year 2007 with AGFA Printdrive Price: on request

2 Thermal VLF Systems: 1 x AGFA Avalon VLF A xxt year : 2006 5000 paltes with new Laserhead AGFA VLF Platemanager with AGFA Elantrix 150 Onlineprocessorwit transit table to the oven. with Haase oven OG15FU with transit table to gum unit withGum unit RSH with explanation table Price: on request 1x AGFA Avalon VLF A xxt year : 2006 Price: on request

Thermal CTP Agfa Xcalibur E Year: 2004 in production with Transporttable Transfer table Processor Agfa Elantrix Workflow Apogee V.7.1 Price: on request

Agfa CTP with developer format 103x77, 64 diods, year 2008

ATS 400A AC-21 12V 251 kVA 4P Total power 251 kVA Nominal current: 400 A System voltage 12V Controller: ComAp Inteli ATS NT PWR Switch: Socomec ATyS r 4P, 400A Max cable connection cross-section: 2 x 185 mm Case dimensions: width 600 mm, height 1150 mm, depth 420 mm. Weight: 81 kg Shipping possible if costs are covered! The General Terms and Conditions of Business, Delivery, Payment and Installation of Aggretech GmbH shall apply exclusively) Art.-No.: 5056

Recyclingmaschinenhandel AGICOM- Pedergnana OG: KOMBI 300 BYPASS; DEMONSTRATION SYSTEM: Specifications: Feed material: electrical cable without impurities Throughput: up to 300kg/h (INPUT) Power consumption: approx. 38 kW Weight: approx. 2100 kg

Aigner Air Jet 4 - Abrasive dust extraction Dry sanding of various materials often produces dust that is harmful to health. An effective solution for this is the use of an abrasive dust extractor. This device reduces dust emissions and helps to comply with the particulate matter limits: 5 mg/m³ in Austria and 1.25 mg/m³ in Germany. - Aigner Air Jet abrasive dust extraction - EC pipe extraction arm - Powder extinguishing system with detection line - incl. documents - Year of construction 2020 Specification - Max. air flow: 5000 m³/h - Max. pressure: 5000 Pa - Filter: 4x 13 m² - Dust: 10 g/m³ - Nominal power/current: 7.5 kW / 35 A - Nominal voltage: 3x 400 V - Net weight: 560 kg

suitable for nitrogen all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm

Complete AKE band sawmill consisting of: Main machine list Log manipulation RR 700 Feeding for debarking Debarking - Cambio (sold) Reducers Feeding saw line First band saw - make: AKE (vertical) Second band saw - make: AKE (horizontal) Hacker Cross-cut saw Two cutting saws - make: JONSERED Lamellar saw make: WACO Model 130 Special Hydraulic equipment Pneumatic equipment Suction Control system Spare parts inventory Round wood L = 1800 - 4500 Diameter = 100 - 1000mm Board thickness = 16 - 100mm Capacity approx. 40,000 m3 of round timber / year in 2-shift operation with an average round timber diameter of 30 cm The system was installed after a fire damage in 1998 and produced until 2004/2005. Until 2008 only limited use. In 2013, the system was professionally dismantled with extensive documentation to ensure easy installation at the new location. Technicians f ...

We sell 140x Alcatel-Lucent IP Touch 4038 extended edition Ice Blue telephone system 1x Alcatel-Lucent IP Touch 4038 extended edition Black telephone system 1x Konftel 300IP PoE (with PSU) conference system 4x Konftel 300IP PoE (without PSU) conference system 6x Alcatel Lucent OmniPCX Enterprise Small 3EH76020AEJD telephone platform, (each w/ Alcatel OmniPCX MIX 4/4/8 and 1x Alcatel OmniPCX GD-3 Gateway driver) 1x Alcatel Lucent OmniPCX Enterprise Small 3EH76020AEJD enclosure (empty) 3x Alcatel Module OmniPCX BRA2 ISDN Access-T0 expansion board 5x Alcatel Module OmniPCX PRA-T2 ISDN Access-EI expansion board 1x Alcatel Lucent Call Server Processing Unit CS-2 expansion board 1x Alcatel OmniPCX MIX 4/4/8 expansion board 1x Alcatel OmniPCX GD-3 Gateway Driver expansion board In most cases, the entire item can only be handed in completely. More information on r ...

Colour JET 2 Paint mist extraction Rated motor power: 0,75 / 2,1 kW Engine speed: 96 min 0/1,430 Air volume: 3,000 / 6,800 m ³/h Effective pressure: 400 / 500 PA Dimensions closed (W/H/D): 1,012 x 1.405 x 943 mm Folded dimensions (W/H/D): 1,897 x 1.405 x 1,166 mm Pre-and fine filter filter area: 1 m² Connection diameter: 300 mm Switch zweistuftig Compact construction, space-saving Powerful, high suction power,. low operating costs Easy maintenance, long filter life Universally applicable, variable accessories High flexibility Mobile design Suction technology with front plate system G & ALKO 19562801

ALKO ECO-JET 35/3N Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A) Fire protection: sprinkler installation with powder fire extinguisher

- Flow rate 2780 m³/h - Pressure 1500 Pa - Motor 3 kW - Connection dm. 200 mm - Residual dust according to H 2

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

Various spiral conveyors height conveyor Ambaflex Apollo Spiral Conveyor Spiralveyor Various Spiral conveyor systems Spiralveyor

Amtmann Fassong banding machine / laminating machine. Year of construction: 1986 Step 1: Foil blanks are separated from the stack by the vacuum plate and partially glued via the gluing unit Work step 2: The A4 cardboard blanks from the additional cover sheet feeder with conveyor belt are separated and transported to the transfer position. Step 3: The partially glued film blank is transferred to the positioned A4 cardboard blank for transfer to the final position. Step 4: Transport by means of a pressure unit. Suitable for solid, shape, edge or strip gluing, depending on the design of the glue transfer roller in time, from different carriers, such as punched blanks, etc. The Fasson banding machine is designed to speed up the production cycle.

Oil mist separator, extraction system, oil mist extraction, suction Brand ANAG Dimensions: wxlxh 55x68x50cm 230V, 50 Hz Quantity: 2 The price is net and is valid for 1 piece.

2 round built, endlessly leading upwards, Spiral conveyor systems for crates and cartons. Manufacturer Apollo VIS Type spiral conveyor 162020 Equipment: 1000038 ICH Assembly: 990800431 Achievable height for carton discharge: 2,600 mm 2 round built, endlessly leading upwards, Spiral conveyor systems for trays and boxes. Manufacturer Apollo VIS Type spiral conveyor 162020 Equipment: 1000038 I assembly: 990800431 Achievable height for carton discharge: 2,600 mm

We sell List of 450 x iPads and iPhones 4/5/6/7/8 This will be available in 2 weeks. In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurb ...

- Folding and gluing machine - Supply voltage(V): 400 - Auxiliary voltage (Vdc): 24 - Frequency (Hz): 50 - Power (kW): 3 - Power of gluing system (kW): 5,8 - Machine length (mm): 6175 - Machine width (mm): 1576 - Machine height (mm): 1580 - Minimum die cut format (mm): 120x120 - Maximum die cut format (mm): 720x1020 - Full automatic continuous feeder - Folder flap group with hot melt gluing system - Folding tools with automatic transport devices - Paper transport system with adjustable pressure - Automatic delivery table - 1 double-sided tape applicator – minimum interval between two tapes is 35 mm - Material: paperboard 200-600 g/m2, corrugated cardboard up to 4 mm thickness - Minimum paper weight: 150 g/m2 - Maximum paper weight: 350 g/m2 - Speed of glue application: 100 m/min Designed for production: - Straight-line boxes - Crash-lock bottom boxes - Fo ...

Machine number: 2022-548 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers For sale we have new diesel generator sets with the following data: Condition: New Engine Cummins Model: 4BTA3.9-G11 Rated Power: 77KvA Continuous power: 70KvA Frequency : 50 Hz Voltage: 400/231 V RPM : 1500 rpm. Year of construction: 2023 Included: Diesel filter, air filter, oil filter High-quality sound hood made of galvanized steel Water preheater Diesel tank, approx. L234 Auto-start, Batteries Circuit breakers Diesel tank Sophisticated controls Battery Battery Charger Controller-DEEPSEA: Model: DSE6120 UK Protection: • Low oil pressure • High water temperature • High/low voltage • High engine temperature and overspeed. • Voltage regulator Frequency regulator • Emergency stop • Startup error  ...

APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: B79qqiplcm - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pall ...