rubber machines used for sale (414)

1 x Francis Shaw model K4 intermix, Machine number: 4549, Original Year of manufacture:1992, Chamber volume: 91 litres, Batch weight: approx 76kg (at 70% F.F. and 1.2 S.G), Hydraulic hopper, Hydraulic drop door with linear actuator, Full unidrive David Brown gearbox - power rating 450kW, ratio 29.065:1 (input speed 1500rpm, output 51rpm), In good condition, but currently without motor or controls. Manuals/drawings available.

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

Qty 1 x Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears (1:1), cored rolls with rotary joints fitted, auto lubrication system with 45kW AC right angle drive variable speed motor and gearbox, fabricated bedplate. Complete with controls. Also available (if required): Sheet material unwind station (let off stand) Simple Cooling unit In-line cutter Accumulator rolls (wind up)

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

Bartell FSW-409 7/8in bead winding machine suitable for PCR tyres 12in to 20in consisting of: - 12 station bead wire let of unit. - Prodicon zig zag cutter Type Z/Z year 1988 (takes sheet compound max 750mm wide and cuts to suitable size for feeding extruder. - 60mm dia coldfeed extruder, L/D ratio 13:1, with 18.4kw DC variable speed motor and 3 x TCU's - Festoon section - Former unit with various Bartell formers available/included. - Siemens S5 plc controls.

Qty 1 x HF/Pomini VIC95X (IM110VIC), Hydraulic hopper (IM90-E type), Refurbished complete chamber and hopper installed new in August 2016, Machine number: 487, year of rebuilding 2014, CE marked, Chamber volume approx: 104Litre, Useful volume at 0.75FF: 78Litre, Batch weight at SG 1.15: 90kg, Hydraulic dust seals (PYH Type), Hydraulic drop door with linear actuator and toggle latch, Rotor geometry adjusted by 2 x 2.2kw, 1420rpm motors, Unidrive gearbox, Ratio 20.6:1, With Ansaldo 352KW, 1030/1230rpm, 875Amp, 440V water cooled DC variable speed motor. Siemens S7 PLC control system (cpu 315-2DP, step 7). Complete and in very good working condition. All manuals and documentation available. Used spare chamber parts available/included:- Qty 1 set (2pc) used rotors Qty 2 sets (4pc) used drilled sides Qty 2pc used door tops Qty 1pc used weight The mixer has now been r ...

Collman Building Machine Ref: RB003 For tyres up to 2.5m and 1m wide With hydraulic cutting unit Can use for smooth and groove Buffing arm can be supplied but will need to be rebuilt with spare motor before being able to use as a Buffer Fully operational Peel, Buff (with arm), Build, Cut Hydraulic motor you can use to cut through cured tyres (very strong arm) Modern Panel

Collman Building Machine Ref: RB008 Quick building due to double rollers Manual With full rack of plates

Collman Buffing / Building / Peeling Machine Ref: RB007 Year 1980’s 50 volts 50 cycles 20kw Manual peeling, buffing, building Good for PCR truck and Light OTR tyres Latest standards

Scholz Steam Autoclave Year 1979 7 bar pressure Internal dims: 1.5m diam. x 2.6mm long Temperature 150deg C 10 x steam connectors Indirect steam Full rail system Machine overhauled 2016/17 Full safety certification available Complete with control panel

Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel

QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injector, Pneumatically operated discharge drop door with linear actuator, Pneumatically operated hopper load door, Pneumatic ram with transducers fitted to monitor floating weight position. Proporti ...

Qty 1 x Carter MK6 direct drive Banbury internal mixer, Serial no. 237/11 (New chamber/hydraulic hopper in 2011/12), Hydraulic hopper, Chamber volume: 160L, 2 wing rotors, SSA type dust stops, hydraulic drop door with linear actuator, pneumatic oil injector fitted to end frame, hydraulic hopper, PIV semi unidrive gearbox (28:1 ratio), 310/620kW power rating, 728/1484rpm input speed, 26/53rpm output speed. Currently fitted with fixed speed motor fitted - 355kW, 744rpm to give rotor speed 26.5rpm. Complete with lubrication unit, hydraulic unit, electrical controls etc and in very good condition (inspection report carried out by Farrel available on request).

JR Dare Press Plate: 1400mm x 1400mm Daylight 530 mm 4 x rams Ram diameter - 16” Max working pressure - 1500 PSI Clamping tonnage - 600T Platen heating - strip heaters 18KW / platen

Vulcatherm Infra Red Oven 250degC max temp with control ID 320x130x2000mm

1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.

1 x Refurbished Pomini Farrel model P160 Banbury internal mixer, Original year of manufacture 1984, Rebuilt in 2017 (not used since), Mixing chamber volume 160L Net, Batch size at 75%FF and SG 1.0 - 120kg, 2 wing rotors, PYH hydraulic dust stops (new), hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, Unidrive gearbox type NF160, rating 640HP, Input speed 1500 rpm, output 39.6rpm. with 470kW, 500V DC variable speed motor. Mechanically complete but currently without electrical controls.

1 x Werner & Pfeiderer (Homrich) model LH30A Banbury type internal mixer, Machine no. 1134/Kom nr: 68314, original year: 1969, Hydraulic drop door, chamber volume: Useful 41 litre, Batch weight: 37kg at SG 0.9, 49kg at SG 1.2 and 57.5kg at SG 1.4, pneumatic hopper, full unidrive gearbox Input 1500rpm, output 45/50rpm, with 150kW DC variable speed motor. Mechanically in very good condition, but without electrical controls.

Qty 1 x Farrel Bridge 4 roll inverted L Lab calender, Roll width: 381 mm roll Ø: 152 mm Roller bearings Speed: 2,38 – 23,8   1/min., adjustable Nip adjustment: by hand Friction: 1:1 / 1:1,21 Drive: 9,25 kW, 380 V Measurement: ca. 1.765 x 1.687 x 1.800 mm (L x W x H) Weight: ca. 1.800 kg in. control cabinet

Qty 1 x Werner & Pfleiderer tangential (Banbury type) Lab internal mixer, Type: GK-1.5N Year: original 1982 Volume: 1,5 L Friction: fixed Gear-box ratio i:1: 13,51 / 15,00 Rotor Speed: variable Ram: pneumatic Discharging: drop door Drive: 22 kW, 440V DC variable speed. Automatic lubrication. In very good condition. Complete with electrical controls etc. Overall dimensions (approx) 2m x 1m x 1.8m high, weight: 1.8ton

1 x Farrel F370 mixer chamber and hopper M/c no. 081110, Date: November 2009, SSA dust stops, 4 Wing Rotors, Drop door with Linear actuator, Base Plate with Toggle Latch. Pneumatic hopper with extension neck (Floating weight looks to be in good condition). Parts available: Body, baseplate, Toggle Latch, actuator and Pneumatic hopper with extension neck.

Qty 1 x Pomini Model P270 Banbury internal mixer, M/c no. 362, Year: 1996, HDM style rotors (2 wing equivalent), PYH Dust stops, Hydraulic drop door discharge with Linear actuator, Vickers hydraulic power pack, Unidrive gearbox with couplings (11D type, 1000HP rating). Pneumatic hopper. Without motor or controls. Can be supplied with or without gearbox. Quote for new motor and controls on request.

1 x Francis Shaw model K1 Intermix MK4, M/c number: 4176, Date: Jan 1991, Net chamber volume: 5.5litres, NR2 style intermeshing rotors, Pneumatic hopper, Hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor. 2 x Tool Temp temperature control units. The mixer has been completely dismantled and the rotors, door top, drilled sides and floating weight have been refurbished and re-chromed.  All other components checked, serviced or replaced during re-assembly.  The mixer will be supplied with NEW control panel with PLC, touch screen PC with data capture.

1 x Farrel Banbury internal Mixer, Model 00C.  Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. In very good condition. Machine to be supplied checked over (overhauled) and fitted with new electrical controls including Siemens S7-1200 PLC and touch screen PC for auto/manual mixing and recipe/data saving.

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98 (year 1998), NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motors, 3ph, 660V, 50Hz. The mixer is in serviceable condition, but is without electrical drives/operator controls, hydraulic unit or lubrication unit (Can all be quoted if required). Full manuals/drawings available. Available: Immediately (ex stock UK).

Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.

QTY 1: New Bainite make 95 litre intermeshing type mixer Model: BMIM95 Intermeshing mixer with hydraulic hopper Net chamber volume: 95 litre Rotor speed: 6 – 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement), Motor power: Siemens 420kW, 1000rpm AC squirrel cage motor with Siemens G150 VFD, Discharge door: Hydraulic drop door type with linear actuator and toggle latch mechanism, Feed Hopper Assembly: Hydraulically operated, Floating weight: single ‘V’ bottom type, Gearbox: Elecon Full unidrive type with S.F. 2.25. Bedplate: Fabricated steel, Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Electrical Controls:  Siemens G150 variable frequency drive controls. Operator control panel with Siemens PLC and HMI.

Qty 1 x Carter MK3+ Banbury internal mixer,  chamber volume 90L,  batch weight approx 85kg,  2 wing tangential rotors,  drilled sides, roller bearings,  hydraulic drop door with linear actuator and spade latch.  F type dust seals.  With 325kw, 1070rpm, 715A, DC variable speed motor and controls.  Pneumatic hopper.  Complete with hydraulic unit, lubrication unit etc and in good condition (previously used for mixing coloured compounds). 

QTY 1 x used Berstorff AUMA  Serial no. AO 3178/75, year 1975, Main drum width +/- 2500mm Main drum dia +/- 3000mm Aux drum dia. 1400mm Thermal oil heating With Sandvik 2250mm 1650SM grade stainless steel belt 1.8mm thick. Hydraulic pressure 350kp/cm  With 40HP motor and 3 stage reduction gearbox. The main drum and steel belt are in good/serviceable condition (the drum and belt were replaced in 1990's).  Note ALSO Available: 1 x new/unused spare Sandvik 1650SM grade stainless steel belt, 2250mm wide (in original crate).

QTY 1 x Berstorff Auma, Original year of manufacture 1972, Main Drum 1700mm wide x 1000mm dia, Aux drums 1700mm x 600mm dia, Steam heated, currently with 1660mm wide rubber coated woven steel belt, max pressure 192 Bar (approx 3000psi), 2 speed gearbox, Modern 5.5kW DC variable speed motor. Including let off and wind up units. Complete and in good working condition.