saws used for sale (1,271)

Key data: 500 mm

Schnittgeschw. 20 - 70 m/min 16 A plug Length 1.85 m Width 0.80 m Height 1.20 m Weight 300 kg Coolant Unit Belt Gears 1 saw blade new Rollable

CONTROLS  PLC TECHNICAL SPECIFICATION  max. cutting height: 360 mm  sawband length: 5334 mm  sawband width: 41 mm  max. bar feed (single stroke): 600 mm  cutting speed min.: 14 m/min  cutting speed max.: 102 m/min  power of band drive: 5.5 kWELECTRICAL SPECIFICATIONS  total power consumption: 10 kWDIMENSIONS / WEIGHTS  space requirements -left/right-: 2840 mm  space requirements -front/back-: 2800 mm  total height: 2130 mm  total weight approx.: 2540 kg

CONTROLS  NC controls SIEMENS S7 TECHNICAL SPECIFICATION  max. diameter of saw blade: 460 mm  cutting capacity round: 146 mm  cutting capacity square: 138 mm  mitre cutting: no   .. oblong: 250 mm  .. .. x: 100 mm  .. to: 220 mm/minDIMENSIONS / WEIGHTS  space requirements -left/right-: 2200 mm  space requirements -front/back-: 1950 mm  total height: 2000 mm  total weight approx.: 2700 kgHigh-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts.With feed conveyor and discharge / vibrating section and extraction system.- max. profile width / height to be processed: 250 / 148 mm- Min. profile width / height to be processed: 10 / 20 mm- Cut-off lengths from 10 mm- Saw blade motor 12/18.5 KW, S6 60%

CONTROLS  electronic controls TECHNICAL SPECIFICATION  max. diameter of saw blade: 260 mm  cutting capacity round: 260 mm  cutting capacity square: 260 mm  mitre cutting: yes   cutting range     round: 260 mm  .. oblong: 400 mmTECHNICAL SPECIFICATION  max. cutting height: 260 mm  sawband length: 4310 mm  sawband width: 0.9 mm  cutting speed min.: 17 m/min  cutting speed max.: 90 m/min  power of band drive: 2.2 kWELECTRICAL SPECIFICATIONS  total power consumption: 3.2 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2400 mm  space requirements -front/back-: 2100 mm  total height: 2000 mm  total weight approx.: 1220 kgMachine overhauled, cleaned, and all oils replaced!The machine is fully hydraulically equipped, with a cooling water tank and pump, and a chip container for quick emptying.

TECHNICAL SPECIFICATION  max. cutting height: 150 mm  sawband length: 3660 mm

cutting range: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 45 degrees: square: 250 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 170 mmcapacity 60 degrees: square: 180 mmautomatic feeds: 9999,9 mmfeed: minimum 2.0 mmcutting diameter: minimum 5.0 mmband speed: 15 - 100 m/minvice: 340 mm Öffnungdimensions of saw-band: 3650 x 27 x 0,9 mmControl: MEP CNC total power requirement: 2.2 kWweight: 1240 kgrange L-W-H: 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on requestEquipment:- robust electro-hydraulic fully automatic band saw (INDUSTRY)- with additional semi-automatic function, for cuts from 0° to 60° left- WINDOWS CE” based MEP 50 – control and 7” touch screen display simple and quick setting of all machine pa ...

cutting diameter: 250 mmsaw band length: 3660x25x0,9 mmcutting width: - mmtotal power requirement: 1 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2x10,5x1,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 mmcutting diameter: 150 mmcutting lenght max.: 1000 mmweight of the machine ca.: 1.35 tdimensions of the machine ca.: 2.7 x 1.5 x 1.65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular Metal Saw manufactured in 2005. This Elumatec AKS 134 features a saw blade diameter of 550 mm vertically and 500 mm horizontally, with a maximum profile height of 250 mm and a maximum feed of 830 mm. If you are looking to get high-quality cutting capabilities, consider the Elumatec AKS 134 machine we have for sale. Contact us for further details.

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

English Translation A Berg & Schmit band saw in double-miter design including 20 new saw bands is available. Miter range: 60°-45°, cutting speed: 80m/min, cutting capacity round: 230mm, cutting capacity square: 230mm/230mm, cutting capacity rectangular: 280mm/150mm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1500mm, weight: approx. 350kg. The machine has a hydraulic oil leak. An on-site inspection is possible.

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

"RSA Heavy Duty Sawing, Deburring, Cleaning and Drying Center" for Steel Pipes The machining center consists of: 1) RSA Precision Speed Saw RASACUT SC 3000 with Bundle Loader 2) RSA linkage between the RSA RASACUT precision high-speed saw and the RSA RASAPLAN XY 3000 deburring system 3) RSA deburring system RASAPLAN XY 3000 4) Extraction system/wet separator for RSA deburring system RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for pipes up to 6,200 mm TECHNICAL DATA Lswvuey E Iype Nu Iehf Tube Ø: 6 mm to 55 mm Wall thicknesses: 1 - 6 mm Bar weight: max. 10 kg/m Materials: Steel Magnetism: max. 3 gauss Output lengths: 6200 mm sawable lengths: 150 - 3000 mm Limitation: Ø 6 – 7.9 mm max. length: 1200 mm Ø 8 – 9.9 mm max. length: 1500 mm Ø 10 – 12 mm max. length: 2000 mm Length tolerance ...

Circular sawing machine. Raw bitsun, unfortunately no technical data.

Key data: 280 mm

Metora, VMG 280G, automatic feeding, chip conveyor, L-310, W-210, H- 180cm

Eisele Cold Circular Saw, BJ. 1968, Machine No. V19104

Wespa band saw. Good used condition. see photos. Blade length max. 4450 mm, blade length min. 4250 mm.

saw blade diameter: 300 mmcutting diameter: 90 mmstroke: mmturning speeds: 40/80 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 350 Kgdimensions of the machine ca.: 0,9 x 0,8 x 1,5 mCold circular saw- Machine light- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Width of the band swa blades: 50-200 mmSharpening pitch: 60 mmWeight: 750 kgWINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNCPNK-CNC is designed to grind all types of band saw blades used in metal cutting.PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technologyTechnical specifications:- Band saw width 50-200mm- Band saw length Max. 12m- Blade thickness Min 0.4mm- Tooth pitch Max. 60mm- Tooth depth Max. 30mm- Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°)- Feed rate (speed controlled) Max. 90 teeth/min.- Grinding wheel dimensions D: Ø250mm d:Ø20mm- Grinding wheel thickness 5-13mm (depending on tooth pitch)- CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm- CBN Grinding wheel thickness 2-3mm (depending on tooth pitch)- Grinding wheel rotation (speed controlled) 1400-5500 r.p.m.- Grinding wheel  ...

Kaltenbach, HCM 750, Cutting area: dia. 220mm, U/I beam : 400 x 150 , Feed rate: 0- 500mm/min , Drive motor: 5HP, 1700kg, sgt. Condition.

Offer 26120 Technical data: - Saw blade diameter approx. 500 mm - Saw blade speed 2800 rpm - Cutting range, e.g. up to approx. 180 x 150 mm - 150 x 200 mm - Feed length at 90° cuts 5 - 600 mm - Bevel cuts up to 45° possible - Compressed air connection 7 bar - Air consumption per work cycle without / with spraying 50 / 64 l - Drive 400 V / 4.0 kW - Space requirement approx. W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - with: - Digital display - Pneumatic vice - Automatic switch-off at the end of the profile

Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine.

Circular Metal Saw manufactured in 2017. This Imet VELOX 350 AF-ENC features a saw blade diameter of Ø350 mm and a spindle speed of 3600 rpm. It includes an electronic feed control for programming length and quantity, along with an extraction system and a roller conveyor for 6m profiles. If you are looking to get high-quality cutting capabilities, consider the Imet VELOX 350 AF-ENC machine we have for sale. Contact us for further details.

Circular Metal Saw manufactured in 2009. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details.

Metal Band Saw manufactured in 2014. This Macc 381 AV features fully automatic operation, a hydraulic clamping vice, and a coolant system. It has a cutting capacity for round material up to 280 mm and square material up to 290 x 290 mm. The machine includes a chip conveyor and a numerical control system for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the Macc 381 AV machine we have for sale. Contact us for further details.

Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details.

Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible.

saw blade diameter: 400 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: flat: mmturning speeds: 1400 / 2800 U/minengine output: 4,0 kWweight of the machine ca.: 180 Kgdimensions: 1,0 x 0,9 x 1,2 mManuell underfloor aluminum circular sawThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmsaw band length: 3800 x 27 x 0,9 mmcutting width: 400 x 260 mmcutting speed: 20 - 90 m/mintotal power requirement: 1,85 kWweight of the machine ca.: 0,62 tdimensions of the machine ca.: 1,8 x 1,6 x 1,5 mSemi-automatic miter band saw- Miter cutting +/- 60 degrees- Coolant system- Emergency stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.