46 BEHRINGER used machine for sale

Band Saw Make: Behringer Type: HBP 340-700 G Year of Make: 1991 Weight: approx. 1,700 kg -Clamping width: 340 mm x 700 mm -Saw blade: 5800 x 38 x 1.3 -Chip discharge: small conveyor belt -Micro and minimum quantity lubrication -Rotatable foundation frame via handwheel for mitre cuts up to 45° -Hydraulic saw blade guide -Hydraulic clamping jaws -Cutting pressure control valve -Automatic high-gear shutdown -Feed roller conveyor 6 m -Discharge roller conveyor 4 m -Measuring device with stop No guarantee, no return, no warranty Transport from the hall is carried out by the seller, at the expense of the buyer. Loading on trucks is done by the seller, at the expense of the buyer. Corresponding truck (load capacity) provided by buyer.

Behringer VPS60-220A - Industrial Panel Saw Machine The BEHRINGER VPS60-220A is a fully automatic industrial panel saw / vertical band saw. It is designed to saw large metal plates, slabs and blocks crosswise – especially steel, aluminum and other metals. - Chip conveyors - Safety device consisting of barrier grille & light barriers - Stairs - Instruction manual and technical documentation - Year of construction 2015 Technical data - Cutting area (W x H): 2250 x 600 mm - Minimally flat (W x H): 500 x 20 mm - Maximum round: 500 mm - Minimum remnant length in automatic Operation: from 40 mm - Minimum residual piece length in man. Operation: from 30 mm - Saw blade dimensions: 11080 x 54 x 1.6 mm - Cutting speed: 17 – 120 m/min - Material support height: approx. 1650 mm - Amount of cooling lubricant approx.: 250 l - Motor power – saw drive: 7.5 kW - Engine po ...

Behringer LPS 60-T - Vertical Metal Band Saw - Servo feed with cutting pressure control - Robust cast iron belt guide - Quick saw blade change - Saw drive operating hours: 32441 h - Year of construction 2017 Technical data - Working area LxWxH: 1260 x 720 x 600 mm - Smallest material height: 10 mm - Smallest section width: 5 mm - Inner table support surface: approx. 1260 x 680 mm - Indoor table max. load: 3000 kg - Outdoor table support surface: approx. 1260 x 680 mm - Outdoor table max. load: 3000 kg - Material support height approx.: 1050mm (incl. bottom tray) - Cutting speed: 10 - 110 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 100 l - Motor power - Saw drive: 5.5 kW - Motor power' hydraulic pump: 2.2 kW - Engine power - Coolant pump: 0.15 kW - Motor power - chip conv ...

Behringer LPS 40-4 - Vertical Metal Band Saw - Hydraulic belt tensioning - Servo-controlled feed - Solid C-frame - Year of construction 2014 Technical data - Working area (LxWxH): 4000 x 680 x 400 mm - Smallest section height: 10 mm - Minimum section width: 15 mm - Inner table support surface: approx. 680 x 4000 mm - Indoor table max. load: 7500 kg - Outdoor table support surface: approx. 680 x 4000 mm - Outdoor table max. load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW - Connected load: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: ...

Technical data: - Cutting range at 90° around 310 mm - - flat 520 x 310 mm - flat at 45° left 350 x 310 mm - flat at 30° left 230 x 310 mm - flat at 45° right 260 x 310 mm - Mitre adjustment left + right - Smallest material dimensions round / flat 10 / 10 x 8 mm - Smallest section length 40 mm - Digital mitre degree number display - Saw blade dimensions 5000 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Bundle tensioning device - Micro spray coolant device - Total drive power 400 V / 6.0 kW - Space requirement approx. W 3000 x H 1600 x D 1750 mm - Weight approx. 1900 kg - 9 pieces of feed + removal trestles height-adjustable

2 x Hacksaws Behringer KS 200HY SuperA275PU4

Band Saw Behringer HBF 430A BJ 2000

Bandsaw Behringer HBF 360A BJ 1997

Key data: 350 mm

Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Flat sawing area 45°: 120 x 100 mm Cutting range round: 120 mm Pneumatic saw blade feed Coolant pump / minimum quantity spraying device Pneumatic material clamping Countershafts for sawing stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Weight: approx. 800 kg

Key data: 700 mm

A Behringer HBP 530 is hereby sold, as this is no longer needed if you are interested, please feel free to write to us

Key data: 400 mm

Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Saw area flat 45°: 140 x 120 mm Saw area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Saw range round 45°: 140 mm Sawing range round 30°: 110 mm Replenishment length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spraying device Hydraulic material clamping Hydraulic material feed Weight: approx. 1300 kg

1. Gebr. Automatic band saw, Fabr. Behringer, Type HBP303A / CNC-AFC, YOC 1994 - CNC control for fully automatic workflow - Cutting range at 90° around 300 mm - flat 300 x 300 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Residual piece length automatic operation / manual approx. 90 / 40 mm - Saw blade dimensions 4640 x 41 x 1.3 mm - Cutting speed infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 7.0 kW - Weight approx. 2500 kg -Operating instructions

Offer 25286 Specifications: - Saw blade dimensions 400 x 35 x 2.0 mm - Cutting range - 90° round approx. 252 mm - flat approx. 250 x 160 mm - Square approx. 210 x 210 mm - 45° round approx. 160 mm - Flat approx. 150 x 150 mm - Material replenishment machine - max. opening width of the vise 265 mm - mitre-adjustable vise - Coolant device - Drive 400 V / 0.65 / 1.6 kW - Space requirement approx. W 1400 x H 950 x D 1700 mm - Weight approx. 600 kg

Hydr.- Two-Column Miter - Metal Band Saw Machine Specifications: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Mitre adjustment by handwheel - Saw blade dimensions 5400 x 38 x 1.3 mm - Incisional speed. infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min -one. Material clamping - Preselection of the lifting height of the saw blade - Micro spray coolant device - Total drive power 400 V / 8 kW - Space requirement approx. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Feed + discharge roller conveyors each approx. 6000 / 8000 mm

Behringer-KS-400-HY-01[printfriendly] X Attention –––Promotions! X Some prices are available until X 31.10.2015 reduced by 20% Hydr. Hacksaw Behringer KS 400 HY Make: Behringer Type: KS 400 HY Masch.-Nr.: 688286 Year of manufacture: 1998 / 2015 tüp. Comm. No.: 3990600/009 Special fixed price: 5.940,- € | now 4.752,- € Specifications Sawing range up to: Ø 400 mm, 350 x 350 mm, 380 x 300 mm Saw blade dimensions: 650 x 50 x 2.5 mm 3 lifting speeds: 40 / 62 / 90 strokes/min. Drive power: 3.0 kW Weight: approx. 820 kg Footprint: W 1.80 x D 0.65 x H 1.25 m Machine color: off-white/red Equipment 3 lifting speeds Stepless cutting pressure adjustment Prestressed plate guide of the saw bracket Dust-tight closed gearbox Accelerated return stroke of the saw bracket Closed Oil Hydraulic System Coolant Setup Limit stop switch Automa ...

Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

BEHRINGER HBP 340 G ist eine Bandsäge für Präzision, hohe Genauigkeit und Zuverlässigkeit. Schnittbereich: rund bis 340 mm; vierkant 340×340 mm; Tischneigung ±45°. Daten: Band 4860 mm×32 mm×1 mm; Geschwindigkeit 15–100 m/min (stufenlos); Anschluss 3×400 V 50 Hz; Abmessungen L3100×B1100×H1700 mm. Zubehör: hydraulischer Schraubstock, Kühleinrichtung, Späneförderer. Erreicht enge Toleranzen; ideal für Automotive, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

cutting diameter:430 mm saw band length:5800 mm cutting width:54 mm total power requirement:11 kW weight of the machine ca.:2,1 t dimensions of the machine ca.:ca. 4,10 × 2,30 × 2,10 m Behringer HBP 430N ? Robust double-column band saw for professional use The HBP 430 N is a high-performance horizontal double-column band saw designed for industrial use, offering impressive cutting precision, robust construction and reliability. It is ideally suited for use in mechanical engineering, steel construction, metal fabrication, as well as in manufacturing and metalworking workshops. With a cutting range of up to Ø 430 mm or 600 × 430 mm at 90°, both solid material and tubes and sections can be processed cost-effectively. A working area of 320 × 430 mm is available for mitre cuts up to 45°. The infinitely variable cutting speed, ranging from 17 to 110 m/min, allows for optimum adaptation  ...

Behringer HBP 263 AG Metallbandsäge Vollautomat (2008) Hersteller: Behringer Typ: HBP 263 AG Metallbandsäge Vollautomat Baujahr: 2008 Arbeitsbereich (Ø / flach): 260 mm / 300 mm x 260 mm Kleinste Materialabmessungen (Ø / flach): 10 mm / 10 mm x 8 mm Kleinste Abschnittlänge: 10 mm Reststücklänge im Automatikbetrieb: ca. 360 mm Reststücklänge manuell: ab 20 mm Schnittgeschwindigkeit: 20 ? 140 m/min Menge Kühlschmiermittel: 60 l Anlagen- bzw. Bandspanndruck: 60 bar Motorleistung Sägeantrieb: 4,0 kW Motorleistung Hydraulikpumpe: 1,5 kW Motorleistung Kühlschmiermittelpumpe: 0,12 kW Motorleistung Späneförderer: 0,09 kW Anschlusswert: ca. 8 kW Spannung: 400 V, 50 Hz Steuer- bzw. Hydraulikventilspannung: 24 V (DC) Stromaufnahme: ca. 16 A Absicherung: 25 A Leitungsquerschnitt: min. 5 x 4 mm² Sägebandabmessung: 4.640 x 34 x 1,1 mm Gewicht (netto): 1800 kg Ma ...

Miter adjustment and roller conveyor. Cutting range up to Ø 230 mm or 310 × 200 mm. For more details, see photo. Machines are generally offered without documentation. If documents are available, they will be attached to the respective machine.

Plate processing center manufactured in 2019. This Behringer MAG EVO 420 is suitable for drilling, tapping, marking, milling, and plasma cutting of flat steel and sheet metal. It features a roller conveyor for sheets up to 4000 x 2000 mm and an automatic turret tool changer with 14 tool positions. If you are looking to get high-quality plate processing capabilities, consider the Behringer MAG EVO 420 machine we have for sale. Contact us for further details.

cutting diameter: 200 mm band length: . mm stroke: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BEHRINGER HBP 340/700 G Metal Band Saw Manufacturer BEHRINGER Model HBP 340/700 G Year 1990 Condition untested Location 63843 Niedernberg DE Lot 50

Metal Band Saw manufactured in 2019. This Behringer HBE 511 A features a cutting capacity of up to 510 mm for round and flat materials. It includes a single feed stroke of 650 mm and operates with a band speed of 15–150 m/min. The machine is equipped with a servo-controlled saw frame feed and hydraulic clamping vice. If you are looking to get high-quality cutting capabilities, consider the Behringer HBE 511 A machine we have for sale. Contact us for more information.

Circular Metal Saw manufactured in 2020. This Behringer VMS 370 PV features a cutting capacity of up to 130 mm for round material and 120 x 120 mm for square material. It includes a saw blade diameter of 370 mm and a hydro-pneumatic saw feed. If you are looking to get high-quality cutting capabilities, consider the Behringer VMS 370 PV machine we have for sale. Contact us for further details.

90° round: 340 mm 90° rectangular: 700 x 340 mm 45° right: 400 x 340 mm 45° left: 400 x 340 mm Depth of throat: 700 mm Max height of workpiece: 340 mm Sawspeed: 17 > 120 m/min Length of band saw: 5800 x 38 x 1,3 mm Power needed: 4 kW Length : 3250 mm Depth : 1700 mm Height: 1850 mm Weight: 2300 kg

cutting diameter: 15 - 300 mm saw band length: 4640 mm cutting width: 1,3 mm cutting range - square -: 300 x 300 mm feed length: 600 mm feed length: multiple: 5400 mm dimensions of saw-band: 4640 x 41 x 1,3 mm cutting speed: 19 - 130 m/min min. cut-off length: 10 mm height of material-table: 700 mm total power requirement: 7 kW weight of the machine ca.: 2,7 t dimensions of machine L x W x H: 2,35 x 2,34 x 1,95 m Accessories: chip conveyor, DRO for cutting length, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 800x500 mm saw band length: 7200x40 mm cutting width: 880 mm cutting speed: 60-100 m/min engine output: 7,5 kW weight: 8800 kg total power requirement: 7,5 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 26500x6000x2100 m Horizontal bandsaw manufacturer: Behringer, Horizontal bandsaw Automatic bandsaw type HBP 430 Metal bandsaw, Band saw machine, bandsaw, Vertical bandsaw, Horizontal bandsaw, hydr. horizontal bandsaw machine, Semi autom, Band saw machine, Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.