saws used for sale (1,270)

Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Behringer VPS60-220A - Industrial Panel Saw Machine The BEHRINGER VPS60-220A is a fully automatic industrial panel saw / vertical band saw. It is designed to saw large metal plates, slabs and blocks crosswise – especially steel, aluminum and other metals. - Chip conveyors - Safety device consisting of barrier grille & light barriers - Stairs - Instruction manual and technical documentation - Year of construction 2015 Technical data - Cutting area (W x H): 2250 x 600 mm - Minimally flat (W x H): 500 x 20 mm - Maximum round: 500 mm - Minimum remnant length in automatic Operation: from 40 mm - Minimum residual piece length in man. Operation: from 30 mm - Saw blade dimensions: 11080 x 54 x 1.6 mm - Cutting speed: 17 – 120 m/min - Material support height: approx. 1650 mm - Amount of cooling lubricant approx.: 250 l - Motor power – saw drive: 7.5 kW - Engine po ...

Behringer LPS 60-T - Vertical Metal Band Saw - Servo feed with cutting pressure control - Robust cast iron belt guide - Quick saw blade change - Saw drive operating hours: 32441 h - Year of construction 2017 Technical data - Working area LxWxH: 1260 x 720 x 600 mm - Smallest material height: 10 mm - Smallest section width: 5 mm - Inner table support surface: approx. 1260 x 680 mm - Indoor table max. load: 3000 kg - Outdoor table support surface: approx. 1260 x 680 mm - Outdoor table max. load: 3000 kg - Material support height approx.: 1050mm (incl. bottom tray) - Cutting speed: 10 - 110 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 100 l - Motor power - Saw drive: 5.5 kW - Motor power' hydraulic pump: 2.2 kW - Engine power - Coolant pump: 0.15 kW - Motor power - chip conv ...

Behringer LPS 40-4 - Vertical Metal Band Saw - Hydraulic belt tensioning - Servo-controlled feed - Solid C-frame - Year of construction 2014 Technical data - Working area (LxWxH): 4000 x 680 x 400 mm - Smallest section height: 10 mm - Minimum section width: 15 mm - Inner table support surface: approx. 680 x 4000 mm - Indoor table max. load: 7500 kg - Outdoor table support surface: approx. 680 x 4000 mm - Outdoor table max. load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or belt tensioning pressure: 85 bar - Quantity of cooling lubricant: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW - Connected load: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: ...

Technical Data (MEP Circular Saw / Cross-Cut Saw - Type C100 / C-Series) Machine type: Manual or semi-automatic metal circular saw / cross-cut saw for precise cuts (steel, non-ferrous metals or profiles depending on the equipment). Saw blade diameter: Typically designed for carbide or HSS saw blades in the range of approx. 250 to 315 mm (for clean, burr-free cuts). Swivel range / mitre: Flexibly adjustable saw head or rotary table for angle cuts (usually 45° left to 45° right or infinitely adjustable). Cutting range (guideline values for this class): Round material at 90°: approx. 85 to 100 mm Square / profiles: approx. 80 x 80 mm to 100 x 70 mm Drive / Power: Robust 400V three-phase motor (often switched in two stages for different cutting speeds depending on material hardness).

Gebr. Band saw Mössner SSF 420, built in 1973 Technical data (Mössner SSF 420) • Impeller/roller diameter: 420 mm • Max. cutting width / projection: approx. 410 mm • Max. cutting height / passage height: approx. 230 mm to 265 mm (depending on year of construction/version) • Work table size: approx. 600 x 600 mm (or 605 x 605 mm) • Table adjustment: can be tilted to the right and left (usually up to 15°–30°) • Cutting speed: Infinitely variable or via gear stages (approx. 12 to 2,000 m/min, ideal for steel, non-ferrous metals and plastics) • Saw blade length: approx. 3,150 mm to 3,260 mm (bandwidth usually from 3 to 16 mm) • Drive power: approx. 2.2 kW (for older models sometimes from 1.7 kW) • Electrical connection: 400 V / 50 Hz (three-phase current) • Machine weight: approx. 600 kg to 800 kg (solid cast iron construction) • Dimensions (L x W  ...

1 Gebr. Hacksaw Kasto, HBS 1, built in 2002 Technical data (KASTO hbs 1) • Saw type: Hydraulic metal hacksaw (semi-automatic) • Cutting range at 90°: ◦ Round: max. 210 mm ◦ Flat (width x height): 240 x 190 mm ◦ Square: 210 x 210 mm • Cutting range at +45° mitre: ◦ Round: max. 150 mm ◦ Flat: 150 x 100 mm ◦ Square: 145 x 145 mm • Saw blade dimensions: 400 x 30 x 1.5 mm • Cutting speeds: 2 steps (16 and 32 m/min) • Motor power: approx. 0.8 kW • Material support height: 500 mm • Machine weight: approx. 170 kg • Dimensions (L x W x H): approx. 1,190 x 480 x 810 mm (lowered) or up to approx. 1,230 mm in maximum position

Technical data: - Cutting range at 90° around 310 mm - - flat 520 x 310 mm - flat at 45° left 350 x 310 mm - flat at 30° left 230 x 310 mm - flat at 45° right 260 x 310 mm - Mitre adjustment left + right - Smallest material dimensions round / flat 10 / 10 x 8 mm - Smallest section length 40 mm - Digital mitre degree number display - Saw blade dimensions 5000 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Bundle tensioning device - Micro spray coolant device - Total drive power 400 V / 6.0 kW - Space requirement approx. W 3000 x H 1600 x D 1750 mm - Weight approx. 1900 kg - 9 pieces of feed + removal trestles height-adjustable

Hacksaw Raim

2 x Hacksaws Behringer KS 200HY SuperA275PU4

Cross-cut saw Scheef

Band Saw Bauer HS260A

cutting diameter: 420 mmsaw band length: 4570 x 41 x1,3 mmtable height: 800 mmcutting width: 400 mmcapacity 90 degrees: round: 420 mmcapacity 90 degrees: flat: 300 x 200 mmcapacity 90 degrees: square: 300 x 200 mmcutting speed: 15 - 90 m/mintotal power requirement: 7,0 kWweight of the machine ca.: 2200 kgdimensions of the machine ca.: - mStandard Accessories for the HFA Series- Chip conveyor- Feed pressure regulator- Cut length adjustment- Multiple feed- Piece counter- Powered chip brush- Hydraulic belt tensioning- Stepless belt speed control- Jog button- Cutting and guide plates- Automatic zero stop- Cutting accuracy monitoring- NC cut length programming- Error reporting systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mmsaw band length: 6300 x 41 x 1,3 mmcutting width: mmtable height: mmsize of profile - max.: mmcutting speed: 10 - 130 m/minsaw band length: 4870 x 27 x 0,9 mmtotal power requirement: 9,0 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: 3,5 x 2,35 x 2,1 mFully automatic band saw- Control Minipos 807- with chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmcapacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 250 x 400 mmsaw band length: mmtable height: mmcutting speed: 20 - 80 m/minControl: konventionell total power requirement: 2,0 kWweight of the machine ca.: kgDimensions (LxWxH): 2,0 x 1,4 x 1,2 mHorizontal band saw, semi-automaticThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcapacity 90 degrees: round: 125 mmcapacity 90 degrees: flat: 170 x 125 mmcapacity 45 degrees: round: 122 mmcapacity 45 degrees: square: 120 mmturning speeds: 3000 U/minengine output: 2,2 kWweight of the machine ca.: 95 Kgdimensions: 0,8 x 0,6 x 1,5 mAluminum circular saw- Pneumatic workpiece clamping system- Micro-spray systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand: FAT Model No.: MOD 270 Year: 1999 Motor: Three-phase, 400V. Manual band saw with 2 cutting speeds. Cutting capacity: - Round, 90º - 220mm - Round, 45º - 170mm - Round, 60º - 90mm - Square, 90º - 215mm - Square, 45º - 170mm - Square, 60º - 90mm - Rectangular, 90º - 250x170mm - Rectangular, 45º - 170x170mm - Rectangular, 60º - 90x90mm

Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg

saw blade diameter: - mmcutting diameter: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: - mmcutting diameter: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Ficep Model: K 60 Year: 2012 Condition: Used Stock number: 9525 Cutting area: 60 x 10 - 610 x 310 mm Strap length: 6350 mm

This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information.

: 260 mm Rund documentation: vorhanden automatic feeds: ja : ja weight of the machine ca.: 2,2 tdimensions of the machine ca.: 1,7 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 315 mmcapacity 90 degrees: flat: 400 x 250 mmcapacity 90 degrees: square: 270 x 270 mmcapacity 45 degrees: flat: RE 300 x 280 mmcapacity 45 degrees: round: RE 280 mmcapacity 45 degrees: square: RE 280 x 280 mmcapacity 45 degrees: flat: LI 280 x 200 mmcapacity 45 degrees: round: LI 250 mmcapacity 45 degrees: square: LI 220 x 220 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 140 x 140 mmturning speed range:: 35 + 70 m/minsaw band length: 3460 x 34 x 1.1 mmwork height max.: 870 mmvoltage: 400 Vengine output: ca. 3.0 kWweight of the machine ca.: 550 kgrange L-W-H: 2150 x 1400 x 1420 mmThe MBS 400 DG model is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve.Features:- Profe ...

cutting diameter: 410 mmcapacity 90 degrees: flat: 540 x 300 mmcapacity 90 degrees: square: 300 x 300 mmcapacity 45 degrees: flat: RE 400 x 210 mmcapacity 45 degrees: round: RE 400 mmcapacity 45 degrees: square: RE 260 x 260 mmcapacity 45 degrees: flat: LI 380 x 170 mmcapacity 45 degrees: round: LI 340 mmcapacity 45 degrees: square: LI 260 x 260 mmcapacity 60 degrees: round: 260 mmcapacity 60 degrees: square: 175 x 175 mmturning speed range:: 45 + 90 m/minsaw band length: 4290 x 34 x 1.1 mmwork height max.: 866 mmvoltage: 400 Vengine output: ca. 3.0 kWweight of the machine ca.: 606 kgrange L-W-H: 2340 x 1430 x 1460 mmThe MBS 600 DG is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve.Features:- Band saw gu ...

cutting diameter: 410 mmcapacity 90 degrees: flat: 540 x 300 mmcapacity 90 degrees: square: 300 x 300 mmcapacity 45 degrees: flat: RE 400 x 210 mmcapacity 45 degrees: round: RE 400 mmcapacity 45 degrees: square: RE 260 x 260 mmcapacity 45 degrees: flat: LI 380 x 170 mmcapacity 45 degrees: round: LI 340 mmcapacity 45 degrees: square: LI 260 x 260 mmcapacity 60 degrees: round: 260 mmcapacity 60 degrees: square: 175 x 175 mmturning speed range:: 20 - 80 m/minsaw band length: 4290 x 34 x 1.1 mmwork height max.: 865 mmvoltage: 400 Vengine output: ca. 3.0 kWweight of the machine ca.: 686 kgrange L-W-H: 2340 x 1430 x 1550 mmThe MBS 600 DGA-V model is a semi-automatic double-miter band saw for miter cuts up to 60°. The infinitely variable cutting speed and the hydraulic vise make for comfortable operation. Thanks to its solid construction, this model guarantees precise cuts when cutting hollow  ...

cutting diameter: 260 mmsaw band length: 3.180 x 27 x 0,9 mm mmcapacity 60 degrees: square: 260 x 260 mmcapacity 60 degrees: flat: 320 x 260 mmcutting length min.: 6 mmcutting speed: 12 -120 m/minControl: KASTO BasicControl total power requirement: 2,5 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: LBH 2,37 x 1,35 x 1,77 mSawing hours: 2,860 h.Includes 3-meter infeed roller conveyorIncludes coolant systemIncludes spray gun for machine cleaningFully hydraulic, high-performance automaticstraight-cut band saw featuring a verticallydescending and horizontally traversing saw blade,designed for series cutting of materials rangingfrom easy-to-machine to difficult-to-machine,including solid stock, tubes, and profiles.• Full machine enclosure• Vertically descending saw blade, selectable0° or 1° head tilt• Hydraulic saw feed, infinitely variablefrom 0 – 300 mm/min• Hy ...

Metal Band Saw manufactured in 2019. This Behringer HBE 511 A features a cutting capacity of up to 510 mm for round and flat materials. It includes a single feed stroke of 650 mm and operates with a band speed of 15–150 m/min. The machine is equipped with a servo-controlled saw frame feed and hydraulic clamping vice. If you are looking to get high-quality cutting capabilities, consider the Behringer HBE 511 A machine we have for sale. Contact us for more information.

Circular Metal Saw manufactured in 2020. This Behringer VMS 370 PV features a cutting capacity of up to 130 mm for round material and 120 x 120 mm for square material. It includes a saw blade diameter of 370 mm and a hydro-pneumatic saw feed. If you are looking to get high-quality cutting capabilities, consider the Behringer VMS 370 PV machine we have for sale. Contact us for further details.

: gebraucht : 2000 : 6253 : prompt, Zwischenverkauf v : 1900 €: 1 : Schwenkrahmen : 2480 x 0,9 x 27 mm: 45 / 90 m/min: 225 mm: 180 x 245 mm: rund 100 mm, 100 x 100 mm : rund 160 mm, 160 x 160 mm : 935 mm: 1.1 kW: 1500 mm: 700 mm: 1400 mm: 225 kgDownfeed with damper cylinder and manual valveCoolant equipmentVice with fast clamping leverRoller table 2000 mm with manual gauge3 pcs. spare bandsOperating manual with EC conformity declarationOPTIONS:Further roller tables and band saw blades on requestBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:htt ...