saws used for sale (1,270)

Offer 26342 Technical data: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Section area, see diagram attached - Swivel range inwards pneumatically 90 - 22.5 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per work cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 7500 x H 1600 x D 1600 mm - Weight approx. 1800 kg - with: - manual cutting length adjustment with digital display, - Sawing unit swivel and tiltable for high and wide profiles, - as well as screech cuts possible, can be swivelled inwards 22.5°, - Digital degree display - separate control cabinet,  ...

Suitable specifically for turning out drillings on HM-equipped saw blades, CV saw blades and bases from a diameter of 80 to 800 mm Ø., Turning time with on and off clamping: 4 minutes , drive power: 2.2 kW with stepless speed regulation via frequency converter, Threading device: Equipped with a cross slide with adjustable dovetail guidance + locking levers, Travel stroke X-axis: about digital display max 200 mm, Y axis: about hand spindle 120 mm , Magnetic holding force: 10 kg/cm², magnet: Suitable specifically for turning out drillings on HM-equipped saw blades, CV saw blades and bases from a diameter of 80 to 800 mm Ø., Dimensions W x D x H =: 1700 x 900 x 1750 mm , mass: 650 kg

Semi-automatic band saw EISMO BOMAR Year of construction: 2016 Bevel cut 45° Max cutting capacity: Ø 260 mm Max vise opening: 300 mm width Motor: 1,5 KW Hydraulic vise Variable speed drive on the blade rotation Automatic descent Lubricant pump Microspraying system Supplied with some new blades Voltage: 380 V Length: 2000 mm Width: 1200 mm Total height: 1400 mm (in low position) Weight: approx 500 KG

Horizontal Band Saw PROMAC SX 818 DV-M Year of construction: 2016 Blades dimensions: 20 x 0,9 x 2080 mm Max cutting capacity: Ø 180 mm Max vise opening: 220 mm Cutting speeds: from 30 to 80 m/min. Motor power: 2 KW Machine in very good condition Blade Speed by variable speed drive Automatic or manual descent Lubricant pump Voltage: 220 V mono Width: 800 mm Depth: 1200 mm Height in low position: 1500 mm Weight: approx 200 KG

Sägeblatt-Ø: 315 x 40 x 2,5 mmcutting diameter: 100 mmsawblade width: 2,5 mmcapacity 90 degrees: round: 100 mmcapacity 90 degrees: flat: 130 x 90 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: flat: 100 x 90 mmturning speeds: 18 + 36 U/minvoltage: 400 Vfrequency: 50 Hzpower capacity: 0,75 - 1,3 kWweight of the machine ca.: 0,22 trange L-W-H: 0,7 x 0,6 x 1,3, m• mitre possibility by adjustment of the sawhead,• self-scrolled vise,• self-ajdustable protection cover,• cooling pump with bin,• 2 steps of cutting speed• with under frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 x 40 x 2,5 mmcutting diameter: 100 mmsawblade width: 2,5 mmcapacity 90 degrees: round: 100 mmcapacity 90 degrees: flat: 130 x 90 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: flat: 100 x 90 mmturning speeds: 18 + 36 U/minvoltage: 400 Vfrequency: 50 Hzpower capacity: 0,75 - 1,3 kWweight of the machine ca.: 0,22 trange L-W-H: 0,7 x 0,6 x 1,3, m• mitre possibility by adjustment of the sawhead,• self-scrolled vise,• self-ajdustable protection cover,• cooling pump with bin,• 2 steps of cutting speed• with under frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Elumatec Model: TS 161/21 Year: 2005 Condition: Used Stock number: 9600 Maximum sawing speed: 3200 1/min Wheel diameter: 280 mm Machine weight: 130 kg Equipment: 2 x roller conveyor (2 x 3 m) Replacement lens

Offered for sale is a metal-cutting circular saw with a manual clamping system. The machine features a pivoting saw head and a material clamping area with a mechanical clamping device. Equipped with a separate control panel, main switch, emergency stop button, analog indicators and machine stand with integrated storage cabinet. Inspection possible by arrangement.

Offered for sale is an automatic horizontal bandsaw with roller conveyor. Control system: Electronic machine control system with display, keyboard and control buttons. Equipped with hydraulic workpiece clamping, material feed system, roller conveyor, safety guards and additional bandsaw blades. Inspection possible by arrangement.

cutting diameter: 220 mmsaw band length: 2455 x 27 x 0,9 mmcutting width: 230 mmcutting speed: 35-74 m/min m/mintotal power requirement: 1,2 kWweight of the machine ca.: 250 tdimensions of the machine ca.: 1,6 x 0,9 x 1,8 mThe GBS 218 Eco AutoCut is a precision miter band saw designed for use in workshops and light industrial settings. It is ideally suited for cutting steel, stainless steel, and aluminum profiles, combining a powerful range of features with user-friendly operation.Thanks to the integrated AutoCut system, the machine offers three selectable operating modes: automatic saw frame lowering with adjustable feed rate, rapid approach to the workpiece, and manual operation with a braking cylinder function. This versatility makes it ideal for a wide variety of sawing requirements.Key features:- Miter cuts up to 60° to the left- Two-stage selectable cutting speed: 35 + 70 m/min- V ...

Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Mitre adjustable left + right up to 30° - Cutting range at 90° round + square 140 mm - Rectangle 210 x 120 mm - at 45° round + square 120 mm - at 30° round + square 105 mm - Cutting speeds infinitely adjustable 10 to 80 m/min - Feed speed of the saw blade hydr. infinitely variable - Pneumatic vise / vice - Coolant device + micro spray system - Discharge roller conveyor with dimension stop 3000 mm - Roller conveyor feed 3000 mm - Pneumatic connection 6 bar - Drive 400 V / 4.0 kW - Space requirement approx. W 1000 x H 1900 x D 1200 mm - Weight approx. 1000 kg

Offer 26219 Technical data: - Saw blade dimensions 3375 x 27 x 1.1 mm - Cutting speed infinitely adjustable 18 - 100 m/min - Hydr. Cutting pressure regulation - Hydr.- Lifting + lowering of the saw frame - Machine table left + right swivel for mitre cuts - Cutting area - at 90° around 255 mm - Square 240 mm - flat 300 x 180 mm - at 45° around 210 mm - flat 200 x 160 mm - at 60° left about 135 mm - Max. opening width of the vice 310 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 2000 x H 1500 x D 2100 mm - Weight approx. 990 kg with - Feed roller conveyor 5000 mm - Discharge roller conveyor with dimension stop 5000 mm

FEEDSTOCK TUBE  external diameter min.: 10 mm  external diameter max.: 101 mm  length min.: 150 mm  lenght max.: 3000 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 17200 mm  space requirements -front/back-: 5930 mm  total weight approx.: 13000 kgCutting  + brushing  + automatic measuring  + automatic washing and drying  + automatic drying- Number of hours: 25.833- Automatic loader for master tube bundles up to 8000 mm.- Square tube diameters: 10x10 up to 100x100mmProcess: The mother tube, up to 8 meters long, is automatically loaded into the cutting unit, where it is cut to the specified length. It then automatically passes to the deburring unit, followed by the measuring unit, which rejects pieces outside of tolerance and allows the acceptable pieces to proceed to the washing and  ...

cutting diameter: 1000 mmsaw band length: 11100 mmcutting width: 1100 mmtotal power requirement: 20 kVAweight of the machine ca.: 14 tdimensions of the machine ca.: 5,4 x 3,2 x 3,9 mCutting capacity:Ø 1000 mm,W 1100 x H 1000 mmmin. Ø 400 mm, W 400 x 100 mmFace parallelism monitoring: optical display in mmMotor power – band drive: 11.0 kWHydraulics: 3.7 kWCoolant: 0.36 kWCleaning brush: 0.09 kWBand speed: 15 – 120 m/min (infinitely variable)Tank capacity: 115 l (hydraulics)250 l (coolant)Saw band dimensions: 80 x 1.6 x 11,100 mmSpace requirements: W 5366 x H 3215 x D 3863 mmTable height: 820 mmWeight: 14,000 kg – no foundation requiredColor: Red/blackThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 320 mmthroat: 310 mmworkpiece height: 230 mmtable-size: 505 x 505 mmcutting speed: 12 - 375 m/minturning speeds: 39 - 1230 U/minsaw band length: 2460 - 2620 mmvoltage: 400 Vtotal power requirement: 1,3 kWweight of the machine ca.: 420 kgdimensions of the machine ca.: 0,80 x 0,80 x 1,65 mwelding equipment: IDEAL air blow equipment: - Serial-No.: 22600-77/14- with stepless feed- welding equipment IDEAL- grinding wheel- machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band Saw Make: Behringer Type: HBP 340-700 G Year of Make: 1991 Weight: approx. 1,700 kg -Clamping width: 340 mm x 700 mm -Saw blade: 5800 x 38 x 1.3 -Chip discharge: small conveyor belt -Micro and minimum quantity lubrication -Rotatable foundation frame via handwheel for mitre cuts up to 45° -Hydraulic saw blade guide -Hydraulic clamping jaws -Cutting pressure control valve -Automatic high-gear shutdown -Feed roller conveyor 6 m -Discharge roller conveyor 4 m -Measuring device with stop No guarantee, no return, no warranty Transport from the hall is carried out by the seller, at the expense of the buyer. Loading on trucks is done by the seller, at the expense of the buyer. Corresponding truck (load capacity) provided by buyer.

CONTROLS  Point-to-point control (NC) SIEMENS S7 TECHNICAL SPECIFICATION  max. diameter of saw blade: 460 mm  cutting capacity round: 146 mm  cutting capacity square: 138 mm  mitre cutting: no   .. oblong: 250 mm  .. .. x: 100 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2200 mm  space requirements -front/back-: 1950 mm  total height: 2000 mm  total weight approx.: 2700 kgHigh-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts.With feed conveyor and discharge / vibrating section and extraction system.- max. profile width / height to be processed: 250 / 148 mm- Min. profile width / height to be processed: 10 / 20 mm- Cut-off lengths from 10 mm- Saw blade motor 12/18.5 KW, S6 60%-Saw blade feed rate: 220 mm/s-3 × 2 m infeed roller conveyor, total length 6.2 m  -Light barrier for material detection  -P ...

- Roller conveyor 6000 mm- Coolant spray nivelling- Sawing pressure device- Automat End \/ Back Stop 

Eisele VMS 120 / Cold Circular Saw -Saw blade diameter: 275 mm -Saw blade speed: 40 / 80 rpm (2 stages, pole switchable) -Cutting speed: approx. 80 m/min -Drive motor: 380 V (three-phase current) - Power: 1.0 / 1.2 kW -Cutting range at 90° (round material): max. Ø 90 mm -Cutting range at 90° (square/rectangle): max. 75 × 75 mm -Cutting range at 45° mitre (rectangle): max. 75 × 75 mm -Coolant device -5x circular saw blades -Material stand Dimensions: LxWxH 0.7x0.6x1.5 meters / Weight 180Kg

Mössner Record SM 420 / Vertical Band Saw -Projection approx. 410mm -Workpiece height approx. 265mm -Saw blade length approx. 3150-3260mm -Saw band width approx. 16mm - Table size approx. 605x605mm -Tilting work table -Cutting speed 12 - 750 m/min -4x gear stages -Strip welding device -Belt grinding device -Footswitch -Drive power approx. 2 KW -Various replacement saw blades -Documentation Dimensions: LxWxH 0.9x0.9x2 meters / Weight 500 kg

cutting diameter: 200 mmband length: . mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.