extruders used for sale (350)

ICMA SAN GIORGIO TWIN SCREW EXTRUDER CO-ROTATING, used for elastomers TPE TPU SBS,.., Extruder with co-rotating segmented screws 2 x 140 mm 36 L/D, Screws speed 178 rpm, Reinforced gearbox, Siemens 430 kW drive, degassing pump, semi-automatic hydraulic screenchanger, hydraulic pack, Dry pelletizing unit, Electric panel overhauled in 2015, added touch control, Constructed in 1997, CE compliance declaration, electric drawings.

UNION SHEET EXTRUSION LINE, for PS for thermoforming sheets up to 1.500 mm wide, Main TR130 extruder with 130 mm screw Ø, 200 kW drive, Elerctrically heated fan cooled barrel., second TR60 extruder with 60 mm screw Ø, 50 Kw drive, 1.500 mm. flat die with flex lip die, 1.500 mm wide 3 roll inclined polishing stack with a.c. drive + inverter individual roll drives., 3 zone thermoregulator, pump group, haul off unit, availability: immediate, working width: 1.500 mm, conditions: good overall conditions, type: flat die

ICMA SAN GIORGIO TWIN SCREW EXTRUSION LINE, used for PE PP, Forced feeding hopper with frame, Extruder with segmented screws 2x140 mm. 32 LD, 200 Kw drive, n.1 vacuum degassing pump, hydraulic screenchanger, Water ring pelletizer (year 2016), drying centrifuge in stainless steel, Constructed in 1990, Offered AS IS WHERE IS, conditions: used

GAMMA MECCANICA AF EXTRUSION LINE (photos and video taken before reconditioning - video includes shredder+granulator available separately), for LDPE LLDPE HDPE PP PS PC ABS, Nominal production rate : 900-1100 kg/h (this varies on material and feeding rate), Average energy consumption : 0,23-0,28 kwh/kg, inlcuding :, Buffer silo, screw conveyor, crammed feeding system, extruder with 160 mmm. screw 36 LD, double degassing system, hydraulic non-stop screenchanger 160/300MF, water ring pelletizer type TFD1000, centrifugal dryer, always ran with clean production scraps, very good running conditions - connected, The line is offered AS IS, See [Constructors page](.gamma-meccanica.it/en/plastic-recycling/plastic-recycling-af/) for more info, options available: reconditioning, capacity: 1.000 kg/h, type: for LDPE HDPE LLDPE PP PS PC ABS

Deze trekwerk zaag van ons gerenommeerde merk SICA S.p.a. staat bij Plastima Used Machinery in de machine opslag. De zaag komt uit 2008 en verkeert in gebruikte, maar goede staat. Merk: SICA S.p.A Bwj Ud Dotpg Avovycow Type: TRS/SY 32-250 C 2000 Serienummer: 0817501 Bouwjaar: 2008 Spanning: 400 V Vermogen: 6 kW Buisdiameter max. 32 - 250 Ø (mm)

Merk: Leistritz AG Model: Micro 27/40 D Type schroef: Dubbele schroef Bouwjaar: 1993 Schroef Ø: 27 mm L/D-verhouding: 40 Werkuren: 2.466 Bws Ud Dvyju Aqdkocjw

• One pair of original WEBER screws (excellent state, including measurement report • One pair of non-original screws Be Udowaxuae Dvycsww • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS-control • Output on PVC around 700 kg/hour

Deze extrusienlijn van Hans Weber GmbH staat bij Plastima Used Machinery in de machine opslag. De lijn komt uit 1991 en verkeert in gebruikte, maar goede staat. – Merk: Hans Weber GmbH – Model: WEBER DS 6.5 – Bouwjaar: 1991 – Schroef Ø: 65 mm – Werkuren: 2.364 Bs Udeqpft Ie Dvyceww

WEBER buisextrusielijn inclusief: Bws Ud Dvysvryhyscsw WEBER DS 8.5 Elmepla zaag Battenfeld R200/6 Battenfeld V125

Deze extruder van WEBER staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1983 en verkeerd in prima staat. Bwj Ud Djq Tr Tbevycow – Merk: Hans Weber GmbH – Model: ZE 30 – Bouwjaar: 1983 – Enkelschroefs extruder – Schroef Ø: 30 mm – verhouding: 20 L/D

This extruder from WEBER is located in the machine storage at Plastima Used Machinery. The machine is from 1997 and is in excellent condition. Brand: Hans Weber GmbH Model: NE 7 048 Screw type: Single screw Year of manufacture: 1997 Screw diameter: 75 mm Be Ud Detpg D Uovyceww L/D Ratio: 30 Operating hours: 76,200

Brand Collin Lab & Pilot Solutions GmbH Type E 30 M Low Boy Type Screw Single Year of manufacturing 1999 Screw Diameter 30 mm Screw L/D 25 Dimensions (LxWxH) 2.000 x 1.200 x 1.900 mm Weight 560 kG Bwo Ud Dvyew Awczjcsw

Werkend uit productie, heeft altijd gelopen met een 800 mm extrusiekop voor het produceren van HDPE buizen. Bwj Uswr Db Nod Dvycjw

Complete extrusielijn. Op aanvraag kunnen ook losse componenten worden aangeboden. De lijn is gebruikt voor het maken van buizen van PP gevuld met krijt en bariumsulfaat. Onderdelen: - 4 Componenten Colortronic dosering (nieuwe sturing in 2017) Ble Udsu Rda Is Dvycop - Berstorff KMC 85/2 (schroeven in 2019 vernieuwd) - Sidefeeder - Complete sturing van de doseringen en extruder - Single olie- temperering - Maag smeltpomp - Krausmaffei Extrusiekop 40 tot 160 mm (met diverse sets) - Vacuumtank Battenfeld V250VA - Spray-bad K250 VA Battenfeld - Trekwerk C250 - 4 Sica - Zaag CCM 32/170-2 Rollepaal - Kieptafel Battenfeld

Deze extruder van Cincinnati staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 1999. Speciale opmerking: de extruder mist de versnellingsbak. Bj Usq Tr T Rod Dvycjlp – Merk: Cincinnati – Model: Titan 45R-APC – Bouwjaar: 1998 – Conische dubbele schroef extruder – Schroef Ø: 45 mm – Werkuren: 64.082

Single-Screw Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Options • Including haul-off Bo Usvri Dded Dvycslp • Including cooling bath

Deze extruder lijn van Kuhne staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 2008 en verkeerd in prima staat. Merk: Kuhne GmbH Model: K 60E - 33D Typen schroef: enkelschroef Bouwjaar: 2008 Schroef Ø: 600mm L/D-verhouding: 33 Hoogte cyclinder: 425 mm Bls Ud Dou Etygevycep Kegelhoogte: 325 mm Total height: 750 mm

Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Ble Ud Dvyovl Hzgocop Machine hours 104.599 hours Screw Diameter 35 mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000 kG

Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Be Ujvuzqzed Dvycelp Connection Load 90 kW

Deze machine staat in opslag bij Plastima Used Machinery Blo Udevcqccs Dvycop

LEISTRITZ 2x67 mm TWIN SCREW COMPOUNDING LINE, Starve feed hopper extruder with 2 x 67 mm Ø segmented, co-rotating screws 34 L/D max screw speed 300 rpm 6 heating areas on barrel vacuum degassing pump d.c. motor 75 kw with forced vent fan control panel size 0,4×1.15 x 2 mt. Dimensions :LxWxH 4,7 x 0,72 x 1,835 mt. weight about 3.000 kgs construction year 1993 machine offered reconditioned, availability: 7 weeks from confirmation, options available: cooling bath, strand pelletizer, conditions: reconditioned

Key data: 130 mm

Installed capacity 498 kW, single degassing with vacuum pump, screw Optimized for film processing used for PE/PP. DC Drive Throughput with PE approx. 500-700 kg at approx. 150 kw. Throughput for PP approx. 450-550 kg at approx. 160 kw. Composed of: Foil silo with agitator and discharge screw approx. 5 m³ Regrind/granules, dosing screw, masterbatch, dosing screw, tamping unit. Extruder 130L/D 35 Hot Knock Off Granulator (Water Ring Granulator) Centrifuge Classifying sieve Removal with pressure blower Screw and barrel were renewed in 10/2020, (repair costs 45.000EUR) Groove bushing at the inlet renewed in 2015 is currently still at 60%. A new groove bushing is included as a spare part and is included in the retail price. (NP.ca. €5,000) The number of hours spent on the extruder from repair to dismantling of the system is 851 hours. Cooling system Indust ...

Ghioldi single layer blown film extruder, suitable for LDPE and MDPE, extruder with 55 mm Ø screw diam., lever screen-changer, Rotating head, 150 mm Ø die, calibrating cage, pull off unit, gusseting units, Cason corona treatment, 1.100 mm single winding station, Tower included, complete with manuals, electrical drawings, CE compliance

Maximum Diameter: 630 mm

Screw Diameter: 92 mm // Throughput: 800 kg/h

Screw Diameter: 130 mm // Throughput: 800 kg/h

Materials: PP // Film Width (Max): 1650 mm

Screw Diameter: 58 mm // Throughput: 450 kg/h

Screw Diameter: 50 mm // Throughput: 150 kg/h

Screw Diameter: 35 mm // Output Capacity: 25 kg/h