other machines for plastic used for sale (408)

# HP Jet Fusion 5200 – Produktionsbereites MJF-System mit vollständiger Peripherie Zum Verkauf steht eine HP Jet Fusion 5200 aus dem Jahr 2019, eine industrielle 3D-Druckanlage auf Basis der MJF -Technologie für die wirtschaftliche Serienfertigung von Kunststoffbauteilen. Die Anlage wurde im August 2020 in Betrieb genommen und verfügt über ca. 5.100 Betriebsstunden. Ein aktiver Wartungsvertrag läuft bis 20.01.2026. Lieferumfang HP Jet Fusion 5200 Druckeinheit Post Processing Station für Pulverentfernung und -aufbereitung 2 Build Units (parallele Produktion, reduzierte Stillstandzeiten) 2 Pulverfässer Transportstapler für Build Units und Materialhandling Technische Spezifikation Bauraum: 380 × 284 × 380 mm Schichtdicke: ca. 80 µm Materialien: PA12, PA12 GB, PA11 (je nach Konfiguration) Pulvermanagement: Automatisiert über Post Processing Station Betriebsart: Industrieller Da ...

AGICOM Recycling Machines Powerful twin-shaft shredder for a wide variety of applications (cables, plastics, wood, fabric, thin-walled ferrous and non-ferrous metals, etc.). It has a hydraulic drive with cooling. Rotor diameter: 520 mm Cutting blade: 50 mm Power: 30 kW, 380V Shredder dimensions: 2350x1400x2930 mm Hydraulic drive of the rotor shaft Control cabinet with control unit Hopper dimensions: 1400x1400 mm Emergency/stop function Year of manufacture: 1999, factory overhauled 2021 CE declaration of conformity, operating instructions in German

Single-screw extruder manufactured in 2005. This TECNOVA ES130/37D DEG features a screw diameter of Ø 130 mm and an L/D ratio of 37:1. It includes a powerful main motor rated at 246 HP and a degassing system for enhanced processing. The barrel temperature control offers individually controlled heating and cooling zones, ensuring optimal performance. If you are looking to get high-quality plastic processing capabilities, consider the TECNOVA ES130/37D DEG machine we have for sale. Contact us for further details.

Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-DT -Drive motor: Siemens 2.2 kW -Funnel opening: 620 x 350 mm -Outlet: 350 x 180 mm -Sieve: Hole size 5 mm -Dimensions: 650/630/H1240 mm -Weight: 192 kg

Two Optitek mould carriers with a control unit in the middle are offered. Opening width min./max.: 600mm/800mm, operating pressure: 6bar, hydraulic pressure: 50bar-200bar, max. clamping force at 200bar: approx. 779.8kN, max. opening force at 200bar: approx. 978.3kN, power supply: 400V/32A. Dimensions X/Y/Z: approx. 2500mm/2050mm/2799mm. The mold carrier is used for handling PU foaming molds. Documentation available. Inspection possible by arrangement.

A Maguire vacuum dryer for plastic granulate is offered. Throughput: approx. 65kg/h, heating power: 11kW, max. operating temperature: 190°C, heating hopper volume: 70l, vacuum chamber volume: 28l, retention hopper volume: 45l, voltage: 400V/3Ph, frequency: 50Hz, current consumption: 9.7A. An on-site inspection is possible.

Year: 2002 New-exhibition machine, never used in production. - 3 motors - pneumatic profile clamping - adjustable milling length

Device for welding plastic tubes with a diameter of 63 to 160 mm consisting of: 1 weld tube positioning device 1 machine for machining the tubes before welding (to remove the oxidized film on the surface) machining of the 2 sides simultaneously 1 Teflon disc for heating tubes before welding.

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 500 mm - max. cutting length: 3000 mm - hydropneumatic feed - vertical and horizontal pneumatic profile mounting

# HP Inc. HP4200 MultiJetFusion Baujahr: 2017 | Technologie: MJF | Standort: Deutschland Gebrauchtes HP4200 MJF-System aus mittelständischem Betrieb in gutem Zustand. Das Gerät wurde bis 2024 im Rahmen eines aktiven Wartungsvertrags (3DaaS) betrieben und weist weniger als 1000 Druckjobs auf. Lieferumfang 1× HP4200 MJF 3D-Drucker 1× HP Processing Station 0× Build Units Diverse Ersatzteile (Filter u.a.) Optionale Services Zertifizierte HP-Techniker bieten auf Anfrage: Fachgerechte De-Installation und Verpackung in Original-HP-Kiste (Verpackung nicht im Lieferumfang, Kaution erforderlich) Installation und Inbetriebnahme vor Ort Englischsprachige Einweisung in Bedienung, Betrieb und Nachbehandlung (3–5 Tage, je nach Umfang) Das System eignet sich für den Einstieg in die MJF-Technologie oder als Erweiterung bestehender Fertigungskapazitäten. Die geringe Anzahl an Druckjobs und der do ...

Format lamination line / lamination line / laminating machine Make Fetzel Type SOVA1 Total power 8 KW Compressed air 6 bar / 250 l/min. Lamination width up to 400 mm Total length 4000 mm, total width 1100 mm, total height 1800 mm With 3 winding/unwinding rollers at the start, heated laminating roller at the top and bottom, laminate winding and protective paper unwinding at the end. Various measuring rollers and deflection rollers. With documentation.

Cart beam punch USM GTH 2165 For stamping leather, textiles, plastics and similar flat materials. Punching 30 tons Year of manufacture: 1986 Weight 2500 kg Dimensions approx. 3.0 x 1.0 x 2.5 m Broken return springs were replaced. Machine works perfectly. With roller stand.

Year: 2007 - technically efficient, ready to work - after full service - pneumatically operated rotary table -90°/0°/+90° - working range: 200 x 240 x 2500 mm - 4 kW motor - speed ​​control (inverter) - 2 electronic position indicators - pneumatic profile clamping - cooling and lubrication system - copying template

A PUR foaming system with Yaskawa industrial robot is offered. Min. dispensing rate: approx. 0.15g/s, max. dispensing rate: 1.6g/s, material system: polyurethane Penguin Foam 3151/3157, drum capacity: 200l, operating voltage: 3 × 400V/N/PE, frequency: 50Hz, control voltage: 24V DC, upstream fuse: 16A. Approx. 30000 assemblies were foam-applied using the system. The system was shut down in 2024 according to the manufacturers instructions. Documentation available. An on-site inspection is possible.

The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Machine pre-equipped for cooling Weight: approx. 1,800 kg Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Year of Make: 2019 Machine in good condition and ready for immediate use!

For sale is a molding machine, manufacturer Erlenbach, type EHV-C 120/670.The machine is in good condition and can be viewed under power by appointment

DL-2400 THREE LAYER CASTING MACHINE SINGLE EXTRUDER CASTING MACHINE

Calender

Breaking capacity: 8kA, power supply: 400V, 50Hz, connected load: 5500VA, weight: 95kg. An on-site inspection is possible.

saw-blade dia.: 250 mmturning speeds: 2800 U/minpressure: 6-7 barweight of the machine ca.: 273 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SACMI complete line for crown cork caps. Pry-off 913 type(PVC-free). Includes press PTC110, lining PM1200, two magnet elevators, silo, separator, automatic counter, chiller.

X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible.

Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades -Manufacturer: Getecha, Side-mounted mill cutting mill -Type: GRS182-A1.50 -Drive motor: 5.5 kW -Inlet cross-section: 310 x 290 mm -Sieve perforation: Ø 6 mm -Dimensions: 720/700/H1220 mm -Weight: 210 kg

Fine impact mill, hammer mill, pin mill, pulverizer, auxiliary mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator, plastic shredder, crusher, plastic rolling mill, plastic cutting mill -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW -Inlet cross-section: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg

Conveyor belt system Trio technik BJ 2022

A complete central plastic granulate drying and conveying system Werner Koch, which was extensively expanded and modernized in 2021, is available. 1) Koch CKT 300 dry air dryer, year of manufacture: 2003, power: 41kW, air capacity: 300m³/h. 2) Koch CKT 500 dry air dryer, year of manufacture: 2021, power: 51kW, air capacity: 500m³/h, control system: Siemens S7. 3) 26x drying hoppers, volume: 11x40l, volume: 13x100l, volume: 2x150l. 4) 38x machine hoppers. 5) 2x Busch vacuum pumps. 6) Automatic Koch Navigator material distribution system, inputs: 26, outputs: 38. Including control cabinets and a central visualization and monitoring system Supervisione 9-7000. Documentation available. An on-site inspection is possible.

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

Year: 2006 - technically efficient, ready to work – after full service - screwdriver - automatic screw feeding system - tilting table top - fittings punch (straight cut)

Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips

A pneumatic Swiss-Sonic ultrasonic welding system is offered. 1) Swiss-Sonic UWP 20-1 ultrasonic welding press, year of manufacture 2014, max. pressing force: 3000N, min./max. welding stroke: 0mm/100mm, throat depth: 220mm, height adjustment: 300mm, max. operating pressure: 6bar, cylinder diameter: 80mm, compressed air connection: 8mm, working range: 220mm-520mm, footprint X/Y: approx. 650mm/450mm, machine dimensions X/Y/Z: approx. 430mm/600mm/1530mm, weight: approx. 150kg. 2) Swiss-Sonic ultrasonic generator. Including peripheral equipment. The images do not show the machine for sale. Documentation available. Inspection by appointment.