other machines for plastic used for sale (521)

Manual Heating Press Reitz MHSP5H - Manual Lifting Screw Press Static Press Force 5 KN (0.5 to) - Portable press frame made of polyamide PA 6G - Manual screw jack with spindle 20 mm, pitch 5 mm - With handwheel diameter 120 mm and handle - Gear reduction ratio 1 : 10, 0.5 mm spindle travel per handwheel revolution, thus only very little hand force required for high pressure. - Table size 100150mm - Clear width 60 mm - Punch size diameter 70 mm with 4 holes 8 mm to attach the Hotplate - Very easy operation due to spindle and worm gear - Total weight approx. 25 kg With 2 electric aluminum heating plates 1200 watts, heating area approx. 150 100 mm to 250°C, connection 230 V. With sensor and temperature control. Pressure-resistant insulating panels at the top and bottom for use in presses. Suitable for pressing, welding and gluing.

This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm

Sturtz welding and cleaning line Left-to-right direction SE-HSM-30/26 Compact 0.2mm 3000x2600mm P-260-WST 4AS-JC WST 25

Laboratory heating press REITZ EHSP5H – used demonstration machine Heating press with pressing pressure 5 KN (0.5 tons) With heating device up to 200 °C from above and below. - Electric screw press press press force 5 KN (0.5 to) - Screw jack with spindle 20 mm, pitch 5 mm - Gear reduction ratio 1 : 10, 0.5 mm spindle travel per revolution - Clear width approx. 60 mm - Pressing area 100150mm - Heating device with temperature control, 2 heating plates 100 x 150 mm - With TECO electric motor 0.18 KW - With reversing contactor control (up – down buttons) and emergency stop - Motor protection plug against overload, with main switch - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 100 kg . Suitable for foil bonding and embossing. Due to self-locking of the spindle, long holding time with constant pressure. The sc ...

Optimize your production with our automatic material feeding system for 10 machines! Components: Stainless Steel Silos: Quantity: 4 Capacity: 70 m³ each Year: 2000 Side Channel Turbine: Power: 7.5 hp (5.5 KW) Electrical panel: Additional equipment: With PLC and display Pipeline & Receivers: For all 10 machines Ready to get started? Contact us directly! Send us a message by WhatsApp to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Laboratory Heating Press EHSP20H – Used Demonstration Machine Table press / electric screw press with pressing pressure 20 KN (2 tons) With heating device up to 200 °C from above and below. Press drive with screw jack gear, reduction ratio 1 : 12, spindle diameter 32 mm, Pitch 6 mm, pressing area approx. 100 150 mm, clear height and stroke approx. 300 mm. Geared motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max. dynamic load 20 kN. With reversing control, control box and motor protection plug. Sturdy press frame made of steel. Undertable made of high-quality aluminium profiles 4545 mm, table surface 600600 mm, Table top made of multiplex board. Total weight approx. 100 kg. The table press has a pressing pressure of 20 kN (dynamic load). Typical applications are pressing work with exact lining. Suitable for pressing bonding, embo ...

Year: 2001 - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm

Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies  ...

FOIL SEALING MACHINE type TS 1000 C-2 Year of Build 1980, Machine No: 1748, for the production of bags made of suitable Polyethylene and polypropylene films Product: Tren suture bag Processing: single-lane or dual-use printed two-lane unprinted Working width: max. 1000 mm Section lengths: 80 - 600 mm Film thicknesses: 2 x 0.015 - 0.100 mm depending on the welding wedge design Working cycles (mech.): max. 150/min. depending on film thickness, type of film, film quality and Section length Film web speed: max. 35 m/min Power consumption: 4 KVA Nominal voltage: 380 V Nominal frequency: 50 Hz Control voltage: 220 V Cooling water consumption: approx. 42 l/h Paint: light grey according to RAL 7030

Vibrating Screen Circular Sieve For Sale Brand: Filtra Model No.: IVR15 Material: Stainless Steel Year: 2004 Sieve: 1500 mm diameter For 3 sizes For more details or to make an enquiry, please contact us.

EPS Crushing & Melting Machine For Sale Brand: Best Machine Industry Model No.: BF-HM Power: 2.57 kW (3.5 hp) Feed Mouth: 380x300 mm For more details or to make an enquiry, please contact us.

Mixers for plastic granules and powdered products. Completely in stainless steel. Mixing motor 4 KW. Mixing chamber with separator on load cells. Pre-tank on load cells. Vacuum pump AZO 4 kW.

Mixer for granules and powdered products Mixomat. Completely in stainless steel. Mixing tanks on load cells. Tegiloxane pump. Vacuum pump AZO 5.5 kW. Granulate gate valve NW 100.

Granule dryer for heating and drying hygroscopic plastic granules. Tank capacity 1200 l. Heating capacity 9 kW. Optionally available with air dryer AZO LE 400 K

Dry air dryer Granulate dryer for drying and heating hygroscopic granules. Capacity 600 l. Heating capacity 4.5 kW. Optionally available with dehumidifier AZO LE 600 P.

Semi-automatic drilling device for plastic parts This purely pneumatic drilling device is designed for repeatable drilling of small plastic parts up to approx. 40 x 200 x 40 mm with holes up to 3 mm. Specifications: - Linear axis travel 420 mm - Stroke approx. 30 mm - Height adjustment approx. 100 mm - With 2-hand release - Plexiglass protection on 3 sides - Emergency stop switch - Sturdy, mobile frame made of aluminium profiles - With 4 swivel castors, 2 of them with brakes - Overall dimensions approx. 1000 x 1000 x 1700 mm - Weight approx. 50 kg - With collet for drill bit 1.5 mm Expiration: - Setup: Adjust stop angle to part size - Setup: Alignment of cross table in X and Y - Setup: Set height adjustment to part height - Inserting the part - Triggering via 2-hand button and holding until drilling is completed - Removal of the finished part and placement  ...

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

Plant complete with all the machinery and molds to produce plastic pots, saucers, cages and thermoformed pot holders of various types and sizes: from 40 cm. up to 1 m. Composed of: N1) 135 ton SANDRETTO plastic injection press N1) 135 ton SANDRETTO plastic injection press N1) 200 ton SANDRETTO plastic injection press N1) 300 ton SANDRETTO plastic injection press N1) 400 ton SANDRETTO plastic injection press N1) 5 pallets CAMPETELLA robot + labeller N1) 7 pallets CAMPETELLA robot + labeller N3) automatic stacking and coding lines N2) mold cabinets with drawers with a capacity of 1000 kg N1) refrigerator to cool water N1) freecooler to cool the oil N59) molds for flower pots

Base Machine is a OMSO DM44N 2-Lane Lid Machine, age 2004, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumulator as well Auto feeding of Lid Stacks to the 2 x Universal Screw Denesters with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Pressure Sensitive Label dispensers, with PLC Controls, manufactured by PAGOmat/ Fuji Seal, Switzerland Outfeed Conveyor to 2-Lane Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Max. dia. of round Lids: Ø125 mm Max. dimensions of Rectangular & Oval Lids: 125 x 150 mm Max. height of Lids: 25 mm Speed with Oval Lids dimensions 120 x 130 mm: Single Lane 110 Lids/ min, Dual Lane 220 Lids/ min 400 V, 3 phase, 50 Hz

Electric surface press REITZ EHSP522 Pressing surface 200200mm Pressure 5 KN / 0.5 tons Suitable for surface bonding of plastics and composites. On request with: - Heating plate and temperature control - Load cells and gauges for use as test press

Data sheet heating press Oropress Pneumatic press 5 KN / 0.5 tons Press stroke 50 mm Adjustment of the clear height with handwheel and spindle, adjustable from 100 to 220 mm. With top heating plate 120 x 100 mm and temperature control, temperature up to 250 °C. Pneumatic two-hand control with triggering via Festo ZSB. Pneumatic sliding table 180 x 220 mm for loading outside the machine. Machine dimensions W = 1100 mm, L = 700 mm, H = 1850 mm Machine weight approx. 300 kg Movable on castors On request for an extra charge with second heating plate and temperature control at the bottom.

Circular vibrating screen, brand: Roto Sieve, diameter: 1,120 mm, power: 3 KW (4 hp), in stainless steel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Plastic agglomerator, engine: 75 KW (100 hp), tank size: 1 m high, 1 m diam. Electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Make: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Hydraulic filter changer: 250 mm, brand: Tecnova, double filter, for extruder 160 Ø diam, year: 2009. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Comexi solvent-free laminating system Coating width = 1320 mm , Speed = 350 m/min, With 2 unwinders (turnstile) With 1 rewinder (turnstile) With Doypag vario mixer. Mixing plant 4 heaters Pre-treatment AFS corona type. G 60 S,

Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 - Pipe diameter max: 125 mm - Cooling length: 6000 mm - Year of construction: 1994

This Haul-Off machine from IPM is in the machine storage at Plastima Used Machinery. The pull bench is from 2005 and is in good condition. – Brand: IPM – Model: Haul-Off TR 400/6 – Year built: 2005 – Voltage: 400 V – Power: 10.94 kW – Pipe diameter max: 63 – 400 Ø (mm) – Additional info: Reinforced model for heavy pipes