Window production machines for plastic windows used for sale (34)

Year: 2014 - technically efficient, ready to work – after full service - motor: 2 x 0.75 kW - pneumatic clamping of the strips - discs with undercutting cutters (2 x 250 mm, 2 x 150 mm) - glass simulator – lateral strip support – stepless (adjustable with a crank and counter) adjustment of the simulator position - manual height adjustment of the work table

Year: 2015 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (retaining and pressing) - through-feed - adjustable height: 500 mm (liftable) - adjustable vertical angle from 0 to 7 degrees - working width: 3500 mm

Year: 2008 - technically efficient, ready to work – after full service - automatic screw feeding system - pneumatic control - base - infeed and outfeed rollers

Glazing bead saw: Sawing Units 1 Length of scanning rod 1,500 mm and 3,000 mm Cutting length max 90 mm Diameter saw blade 175 mm Cutting height 25 mm Support length 1,500 mm Main motor 0.5 kW Saw blades fixed 45° For plastics Pneumatic clamps Saw feed manual

In need of repair - temperature controller defective! Single Head Welding Machine Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

Double mitre saw Haffner DGS 1873400 for PVC profile blanks Technical data: Built in 1994 Diameter of the saw blades mm 500 2 motors per Kw 2.2 - speed 2800 Cutting length max mm 3400 Cutting length min mm 230 Cutting depth approx. mm 150 Swivel range 45-90 degrees Hydropneumatic saw feed Pneumatic workpiece clamping Control panel with double buttons 2 suction nozzles diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Technical data: heated blades, welding bead limitation 0.2 mm, optimisation of the welding result by means of parallel thrust welding processes, individual setting of the welding parameters, quick change of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/stroke, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, mains voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg.

Year: 2006 - technically efficient, ready to work – after full service - flash limit: 2 mm - angle range: 30-180 degrees - large heater - side supports - air preparation station

URBAN AKS 3950 2 head welder - very good condition - barely used, perfect condition

Rotox Water Slot Mill

Single Head Corner Welding Machine

Year: 2009 - technically efficient, ready to work – after full service - pneumatic clamps - cutting at 45° - two cutting discs: 225 mm + two scoring blades - measuring slider

Year: 2005 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (resistance and pressure) - adjustable height: 500 mm (liftable) - working length: 2700 mm

Wing Attachment Table Dimensions approx. L 2700 mm x W 1300 mm with glazing bead saws right and left Handle drilling unit with 3 drills Automatic screwdriver Lock box milling machine Drill bits for corner trestles Good, ready-to-use condition.

Welding Machine Urban Plastic Window Welding Machine Type: AKS 3610 Year of manufacture: 2/92 Connected load 2.7 kW Mains voltage 220 V, 50/50 Hz Operating pressure 8 bar Air requirement per weld/stroke 15 l at 6 bar Adjustment range angle 30° - 180° Profile height min. 30 – max. 105 mm Profile width at 90° max. 157 mm Compressed air connection NW 8, 7 bar - Heated blade bead limitation 0.2 mm - Angle welding from 30° - 180° with excellent accuracy. - Above-average welding results of the AKS 3610 for acrylic and foil-coated profiles. - Optimization of the welding result through parallel welding processes. - Individual setting of all welding parameters - Quick change of the outer contour allowances with holding magnets. Machine dimensions: L 770 mm x W 880 mm x H 1500 mm Weight: 320 kg

Double Head Welding Machine Urban Plastic Window Welding Machine Type: AKS 4110 Year of Make: 2/91 Working length max. 3090 mm Connected load 6.5 kW Operating pressure 8 bar Air requirement per weld 15 l Electronic temperature control Welding level 0 – 300°C Electronic temperature control Welding limitation 35 – 65°C - Heated blade welding bead limitation 2 mm - Welding of 2 corner joints at an angle of 90° in one operation. - Fast and accurate insertion of the profile thanks to the automatic welding head feed. - Automatic weld adaptation to different profile cross-sections - Safety clamping systems that automatically adjust to different profile heights. - Guide elements made of hardened, ground shafts with recirculating ball bushings. Machine dimensions: L 4015 mm x W 1100 mm x H 1840 mm Weight: 790 kg

Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm - maximum welding length: 2600 mm - support arms - PLC controller

Year: 2011 - technically efficient, ready to work – after full service - WT 535B automatic rotary station - disc cutter: 250 mm - windows PC control - profile recognition system - for turning tools on and off as needed - extensive tool equipment

Year: 2006 - technically efficient, ready to work – after full service - handle function - copying template - pneumatic profile mounting - centering device

- technically efficient, ready to work – after full service - drilling for the bottom hinge - automatic screwdriver + ASS 60 screw feeder - punch holder - centring system - steering stop for trimming the stay - tilting table - shelf

Year: 2003 technically efficient, ready to work – after full service flash limit: 0.2 – 2 mm maximum welding dimension: 2400 mm support path programmable PLC controller automatic welding process

technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg

Year: 2018 technically efficient, ready to work – after full service hydropneumatic head feed with automatic profile height measurement automatic zeroing after the end of the work cycle double vertical and horizontal pneumatic clamps minimum internal pack dimension: 450 mm maximum internal pack dimension: 2740 mm

Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles

Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table

Year: 2007 - technically efficient, ready to work – after full service - disc cutter: 250 mm - 4 CNC axes - working height: 200 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/outfeed table

Year: 2000 - technically efficient, ready to work – after full service - 4 heads - support arms

Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process

URBAN AMS 6010 very good condition fully operational

Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers

Year: 2006 technically efficient, ready to work – after full service 3-spindle (high-speed motors) possibility of setting for various profiles (frame / sash) pneumatic profile clamping

Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table

Year: 2015 - technically efficient, ready to work – after full service - working dimensions: 2800 x 1350 mm - tilting stop pins - pneumatically tilted - sliding/brush strips - pneumatic gun DGS 3100 - pneumatic screw feeder ASS 60

Sturtz welding and cleaning line Left-to-right direction SE-HSM-30/26 Compact 0.2mm 3000x2600mm P-260-WST 4AS-JC WST 25