other machinery for waste disposal and recycling used for sale (389)

Avian Plastics Granulator G60/150-R5-S2 — Like New Manufacturer: Avian Model: G60/150-R5-S2 Machine type: Central granulator / plastics cutting mill Cutting chamber: 600 mm x 1,500 mm Rotor: 5-knife rotor (R5), scissor cut Blades: DC53 tool steel, 58–60 HRC Screen size: 25 mm Bearings: SKF Weight: approx. 8,000 kg Condition: Machine was in operation for only a few months and has since been fully refurbished. Near-new condition. Included: - Newly built control cabinet with Siemens components (unused) - Set of new spare blades Suitable for: Plastics recycling, size reduction of rigid plastics, film, sheet, sprues, purgings, and general plastic waste. Find more here - .ucymachines/ Contact us at - sales@ucymachines

The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...

STRAND PELLETIZER, For extruders 500 to 1500 kg/h, width 350 mm., fixed pitch, Counter-blade with 2 cutting edges,, 11 kw drive Supporting structure made in sturdy steel with sides made in special alloy. Group of dandy rolls to guide the streams Lower roll in cemented steel Upper, pressing roll made in nitrated steel, pneumatically lifted Asynchrone drive with inverter Cutting unit with dual cutting edge Made in anti-wear steel Electrical control panel with general switch,service switch and amperometer Adjustable speed Rotor diam. 240 mm. N.28 teeth on rotor Include n.1 extractor, User’s manual, CE compliance, installed power - used power in work: about 60-65% : 11 kW, availability: 60-70 working days ca, working width: 350, capacity: 500 to 1.500 kg/h, conditions: new machine, type: fixed pitch

STRAND PELLETIZER, 100 mm wide rotor,, 170 mm Ø,, for max n.12 strands, fixed pitch, for up to 200 kg/h capacity, 3,0 kW drive, belt transmission, speed variation through inverter, pneumatic piston to regulate pressure on roll, electric panel on the structure of the machine, hinged cutting chamber, can be totally opened, n.30 knives, Soundproof panel on cutter protection hood, Base mounted on wheels, User’s manual, CE compliance, Dimensions LxWxH 0,86 x 0,92 x 1,57 mt., Weight abt: 280 kg., installed power - used power in work: about 60-65% : 3,0 kw, availability: 60 working days from confirmation, working width: 100 mm, capacity: up to 200 kg/h, conditions: new machine, type: strand pelletizer

Pellenc Mistral + 2800 with Westeria acceleration belt and disc distributor (built in 2022) for optimal material distribution on the belt. The system is in good condition and up to date with the latest software.

This cable peeler is an immediately available used machine. It is workshop-tested and equipped with new knives. The Maxi 100 is an enormously versatile cable slitting machine with vertical cutting blades. No matter how thick or thin the insulation is, the cables are peeled to a tenth of a millimeter. Due to the strong interlocking, the cables do not slip, but are transported reliably. Damaged or thinner or thicker areas in the wiring harness are also well transported by the spring-mounted pull wheels. Blunt knives can be easily and inexpensively resharpened with a standard grinder. The Maxi 100 is suitable for practically any cable. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Technical data: Power connection: 2 x 1.5kW Electrically inserted into the baler's feed hopper If you have any questions, please call us: +48 696 072 985

A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible.

Roll-off container TECHNICAL DATA: External dimensions: 7.28 x 2.46 x H 2.44 m Interior dimensions: 6.94 x 2.31 x H 2.19 m Suitable for garbage collection

An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible.

CHAIN EXTRACTION BELT, 4.370 mm long, 5,5 kW motor, Spaggiari gearbox With central chain transport and paddles Flat type on supports Stainless steel structure, n.4 F218 bearings Construction year 2013 510 mm.outer width 410 mm.inside width, installed power - used power in work: about 60-65% : 5,5 kW, working width: 410 mm., conditions: checked

GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

Manufacturer: ERDWICH Model: M600/1-400 Year of Manufacture: :2022 Condition: As new / barely used Operating Hours: 5 hours Complete machine as shown in the pictures and drawings (including control unit/switch cabinet, feed area, and access platform) Find more here - .ucymachines/ Contact us at - sales@ucymachines

We have a Bonfiglioli Squalo 600 machine in a working condition. The machine is avaliable " Today".

A Strautmann plastic briquetting press is available. Pressing force: 300kN, hopper type: TS 1600, system dimensions X/Y/Z: approx. 6750mm/1900mm/2750mm. Documentation available. An on-site inspection is possible.

Putzmeister sewage sludge conveyor system with a maximum delivery rate of 6-7 t per hour and a pressure of 100bar (including pumping) Is no longer in the pit in the pictures, has been cleaned and stored. Fully functional and hardly used Design data (organic) Medium Conveying medium: Sewage sludge Material definition (Fluid I / Fluid II) (1): Fluid 2 Dry matter content: 25 to 30% Type of dewatering: Centrifuge Precipitant (4): Polymer Maximum particle size: 5 mm Type / size of foreign bodies (6): Wood, glass, stones / 80 x 80 x 80 mm Flowability: Like moist soil Temperature of the medium: +5 to +20 °C Density of the medium: 0.9 to 1.1 t/m³ pH value: 6 to 8 Gas formation: None Loss on ignition (5): < 40% Rheological behaviour: Thixotropic Aggressive: No Abrasive: Yes Corrosive: No Sticky: Yes Further data: Installation location: Outside Ambient temperature: -5 to ...

Mustang FH05 demolition pulverizer, - Application: For excavators from 4 to 12 tons, - Self-weight: 400 kg, - Rotation: 360° hydraulic rotation, - Hydraulic pressure: 250 bar, - Hydraulic flow: 20-70 L/min, - Other features: replaceable teeth on the jaws

System Description Partial automated sorting system for returnable beverage crates and EPS foldable trays. Incoming returnable containers arrive mainly on Euro and half pallets and must be manually unloaded due to mixed crate types. Additional quantities arrive in roll containers. Main Functions - Identification and sorting of various returnable crate types - Deposit value calculation per crate based on pallet barcode - Sorting of bottles into 20-unit and 24-unit module crates - Automatic unpacking of EPS trays with bottles using Inlet systems - Handling of up to 440 crate types - Sorting of standing bottles inside EPS trays with Inlets - Allocation of sorted crates for automated palletizing or manual handling Capacity and Performance - Total annual throughput: 6.5 million crates - Operation: 2 shifts per day, 5 days per week - Average throughput: 1,625 crates per hour - Peak throug ...

OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection

UNUSED - Size: 1.250 x 900 mm (Stainless steel) - Magnetic Vibrator: MV E (3 kW / 1.500 U/min) - With Tyristor controller

Size : 3.000 x 1.950mm. - With 2 Pcs. Friedrich unbalance motors of 2KW each. - Included: Frame with rubbers springs and springs

OVERHAULED - Power: 10,9 / 7,2 kW - Amperage: 49,3 / 32,5A - Voltage: 220V. DC - L x W: 1.600 x 1.300 mm - Conveyor belt: 1.400 mm - AA.: 2.530 mm - With Transformator rectifier from 380V. AC to 220V. DC - Overband separator is sandblasted and painted.

Power: 56,1 kW - Amperage: 173 A - Voltage: 300V. DC - 100% ED Magnet L x W: (1.800 + 2 x 450=) 2.700 x 1.600 mm - Conveyor belt: 1.600 mm - AA.: Ca. 4.500 mm

Power: 14 kW - Amperage: 63,58 A - Voltage: 220V. DC - 100% ED Magnet L x W: (1.400 + 2 x 420=) 2.240 x 1.360 mm - Conveyor belt: 1.400 mm - AA.: Ca. 2.900 mm - With Transformer rectifier of 380V. Primary

Magnet L x W X H: (1.200 + 1.200=) 2.400 x 1.200 x 400mm. (130mm. Transportmagnet) . Belt: 1.400mm. - AA.: Ca. 3.050mm. - Weight: 4.850KG

Magnet L x W x H: 1.270 x 530 x 240mm. - Belt: 700mm. - AA.: Ca. 1.700mm. - With new E.motor

Guillotine, reel slitters for paper and plastics 50 T, Working width 2.500 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulik pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T

GUILLOTINE PAPER AND FILM REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.250 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](.germanplast.eu/listings/4115633-guillotine-reel-slitter) for full description., Force: 50 T

Guillotine, reel slitters for paper and plastics 2500x850mm, Working width 2.500 mm, Working height 850 mm, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T

Guillotine, reel slitters for paper and plastics 35 T, constructed in sturdy painted steel,, Working width 2.500 mm, Working height 1.250 mm, No.2 pumps 30+30 lt/min Volume 21+21 ccm, Speed up : 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Increased speed system, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T