other machinery for waste disposal and recycling used for sale (389)

Guillotine, reel slitter for paper and plastics 25 T, NOW IN STOCK, Working width 1.500 mm, Working height 850 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T, availability: NOW IN STOCK

Guillotine, reel slitters for paper and plastics 50 T, Working width 3.000 mm, Working height 1.250 mm, No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., Cutting force 2x25 Ton., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50To, installed power - used power in work: about 60-65% : 15

Guillotine, reel slitters for paper and plastics 30T, Working width 1.500 mm Working height 1.250 mm Cutting force 1×30 Ton., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt. Single piston with 2-sides racks to avoid any oscillations and swaying 7,5 Kw drive 400V 50 Hz Safety devices included : Emergency STOP button+ pull-rope STOP+ Knife protection + 2-hands operation + protection grids + hydraulic knife locking system. hydraulic pack can be lodged on top for space saving Complete with control panel User’s manual, drawings, CE compliance for overseas transport, you will need an out-of-gauge 20’fcl Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Size for transport: LxWxH 2,5 x 1,5 x 2,50 m. + 0,8 x 0,6 x 1,0 m. (hydrauluc pack), Force: 30 T, width: 1.500 mm.(59.06), height (cutting): 1.250  ...

Guillotine, reel slitter for paper and plastics 60 T, Working width 3.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 1.500 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

Guillotine, reel slitters for paper and plastics 60 T, Working width 3.500 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 1.500 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T

Guillotine, reel slitter for paper and plastics 35 T, NOW IN STOCK, Working width 2.000 mm, Working height 1.250 mm, Increased speed system, Cutting force 2x17,5 Ton., no.2 pumps 30 + 30 l/min, Pump volume 21+ 21 ccm, Speed up 84 mm/sec, Speed down (80 Bar) 20-40 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T, availability: now in stock, working width: 2000 mm, conditions: new machine, type: compliant with EU safety regulations

Guillotine, reel slitters for paper and plastics 35 T, Working width 2.000 mm, Working height 850 mm, No.2 pumps flow 30+30 lt/min, Pumps volume 21 + 21 ccm, Speed up to 84 mm/sec, Speed down:(80 Bar) 20-40 mm/sec, Cutting force 2x17,5 Ton., 9 Kw drive 400V 50 Hz, Oil tank 175 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 35 T

Guillotine, reel slitters for paper and plastics 30 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x30 Ton., 7,5 Kw drive 400V 50 Hz., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 30 T, availability: about 8 weeks time from confirmation

Guillotine, reel slitters for paper and plastics 25 T, NOW IN STOCK, Working width 1.500 mm, Working height 1.250 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T, availability: NOW IN STOCK

Guillotine, reel slitters for paper and plastics, These reel slitters are particularly recommended to reduce the size of scraps before a further recycling process. They are ideal for paper, plastic, fabric, rubber, polylaminated, AL foil, in the shape of REELS, BALES, LOOSE MATERIAL, FIBERS, and more., Proposed in different standard dimensions and cutting forces, or bespoke to project, these machines feature a sturdy steel structure, top quality components and are constructed according to the strictest EU regulations to perform at their best and keep their value in the years with the simplest maintenance., Sturdy and reliable, these guillotines give excellent performances even on lower tonnage, for paper and plastic film reels., with increased speed system, our guillotines can double the work done, compared with other models., One operator is needed to work in full safety conditions: 2-h ...

Actini Effluent treatment skids, 2016, Effluent treatment system, they have both pH dosing capability and a steam heat exchanger for heat sanitization, water is then clear to be reused or disposed into drainage.

Mobile sorting table Cycle Sort Type B BJ 2025

Mobile screw compactor Pöttinger BJ 2019

Manufacturer: Zerma Model: GSE 700/1000 Year of Manufacture: 2021 Inlet dimensions: 720 x 990 mm Rotor diameter: 700 mm Working width: 1000 mm 7 x 2 rotor blades 2 stator knives Sieve insert: 10 mm Ø Drive 75 kW, 1500 rpm, IP 55, 400 V, 50 Hz, IE3 The machine has not yet been assembled or put into operation and is therefore in mint condition. Feed Belt (Bias Belt 1) - Length (AA): 6000 mm - Width (GB): 980 mm - Drive: 1.5 kW - PVC stud belt with lower belt cover - Equipped with 2 × emergency stop buttons Switchgear - Load-dependent control - Mounted on a separate frame Extraction System – MFT 55/500 - Power: 11 kW - Pipeline: NW 200 mm Ø - Rack for bagging into double big bags - Cyclone: 800 × 2400 mm - Exhaust box with 12 exhaust hoses Metal Separator - NW 150 mm Ø - Quantity: 1 piece Fine Material Separator – Type FAS 500 - With MFT 30/300 blower (4 kW) -  ...

Manufacturer: Komptech Model: Multistar Star Screen (including control unit) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: JENZ Model: NZ 1600 Type of Machine : waste wood shredder Find more here - .ucymachines/ Contact us at - sales@ucymachines

Sorting/Cutting Table

Müstang demolition pulverizer RH16, - with 360° rotator, - 1500 kg dead weight, - for 12 - 20 t excavators, - Year of construction 2025

Müstang demolition pulverizer, NEW!, Year of construction: 2025, 1050 kg, Suitable for 9-16 t excavators

A compact, effective and powerful system for the separation of light residues. The adjustable suction head can be mounted directly on a conveyor belt or above a star screen deck. The MM Air 22 air classifier is designed for maximum impact, ease of installation and reliability. The MM Air 22 air classifier has the following features: 22 kW highly effective suction unit with belt drive Built-in electric control panel Variable speed control Air flow rate up to 266 m³/min Large doors for easy maintenance and cleaning Reinforced fan wheel and suction chamber Universal conveyor belt attachment There can be two suction heads on the machine can be attached Vacuum head: Suction head suitable for a bandwidth between 800 - 1200mm Easy to assemble and stable while working 400mm air hose connection to MM-Air 22 Electric Suction Fan Unit: Length: 1850 mm Width: 1323 mm Heigh ...

Year of manufacture: 1973 Inlet size: 1500x1300 mm Weight: approx. 32 t The rotor is 1400 mm wide and has a diameter of 1350 mm. Upper part of the crusher with inlet. Inlet size: 1500 mm wide, 1300 mm high. Drive motor with Voith turbo coupling, 250 kW motor. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Lundberg ‎ Model: WasteTech 200 Year of Manufacture: 2022 WasteTech 200 All-in-one Units are designed to capture, convey, cut and collect edge trim waste from up to 8 process machines. Configuration of Granulator(s) is customised to the material and number of process machines and disposal can be in a sack, TubeBag, bigbag or compactor. Specifications: - 4 cutting motors - Maximum air capacity: 3,000 m³/hour (1,770 CFM) - Maximum pipe size: Dia. 200 mm (8) transfer - Maximum suction distance: Up to 30 m (100 feet) - Size (LxWxH): 2,535 x 1,300 x 3,290 mm (8’-4” x 4’-3” x 10’-10”) - Weight: 495 kg (1,090 lbs) - Motor ventilator: 7.5 kW (10 HP) - Power: 3 Phase, 230-460V, 50-60 Hz - Sound: 68–72 dB (A) - Colour: RAL5010 Find more here - .ucymachines/ Contact us at - sales@ucymachines

TECHNICAL SPECIFICATIONS Manufacturer: Unknown Description: Ascending Conveyor Belt Wheelbase: 55,000 mm Belt width: 800 mm Drive power: 30 kW Horizontal conveyor length: approx. 25,000 mm Belt type horizontal: C-profile Conveyor length with pitch: approx. 30,000 mm Belt type with pitch: grid construction Discharge height: approx. 11,000 mm Hot-dip galvanized: yes Length of pavement: approx. 30,000 mm, on one side Outrigger: 1 pc A-supports Maintenance platform: Yes, drive station Distance between upper chord stations: 1,000 mm

TECHNICAL SPECIFICATIONS Manufacturer: BOREMA Umwelttechnik AG Description: Manual sorting system Version: with feed hopper, conveyor technology, overbelt magnet Year of construction: 2024 Material: KVA pre-sorted, combustible waste Feed size: approx. 0-500 mm Required capacity: approx. 5.0 t/h FACILITY CONSISTS OF: 01) Vibratory Conveyor SFLU Dimensions (LxWxH): 5,000 x 800 x 250 mm Hopper volume: approx. 5 cbm 02) Climbing Tape FB Conveyor belt length: 3,000 mm Conveyor belt width: 1,000 mm Inclination: approx. 20° Drive power: 3 kW Rubber Belt: Supergrip 03) Permanent overbelt magnetic separator IMP Z-120 Material: magnetic FE metals Drive power: 2.2 KW, 400 V, 50 Hz 04) Sliding belt conveyor FB, manual harvest Conveyor belt length: 6,500 mm Conveyor belt width: 1,000 mm Drive power: 3 kW Hand sorting area: Lining with wood 05) Swivel Sliding  ...

Copper / Aluminum cable processing line, composed of: MAYPER shredder mill Power: 4 kW Product elevator Useful width: 350 mm Length: 4000 mm GUIDETTI SINCRO 315 compact granulator, for recycling copper or aluminum cables Capacity: 130 kg/h 6.1 kW; 400 V 50 Hz FORNUMAC conveyor belt Useful width: 250 mm Useful length: 1500 mm

Ruwac DS2420 G-B1 Industrial Vacuum Cleaner Manufacturer: Ruwac Model No.: DS2420 G-B1 Voltage: 400 volts Motor power: 4 kW 8.3 A Weight: approx. 100 kg DGUV until 2024 Suitable for sucking up more flammable dusts in zone 11 Cracks in the cover More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: Haarsleev Model: Disc Dryer Year of Manufacture: 2019/2020 Decommissioned : December 2024 Drying capacity of up to 50,000 tons of sludge per year Type: Disc Dryer 2264-TST Heating Surface – Rotor: 380 m² Heating Surface – Steam Jacket: 36.5 m² Disc Thickness: 14 mm Dimensions: - Length: approx. 14,386 mm - Width: approx. 3,562 mm - Height: approx. 5,061 mm Shipping Weight: 110,000 kg Maximum Operating Weight: 154,000 kg Gearbox: SEW X4FA310T Gearbox Oil: Meropa 320, approx. 540 L Gear Ratio: i = 180 Motor: Hoyer IE3 Motor Power: 200 kW Motor Speed: 1488 rpm Voltage: 400 V Frequency: 50 Hz Transmission: V-belt drive Clutch: Hydraulic clutch Bearing: Spherical roller bearing type C4 Steam Inlet: 5 sealed head Condensate Outlet: 3 1/2 sealed head Rotation Direction of Rotor (viewed from drive end): Clockwise Design Pressure: 10 bar Consumptio ...

Manufacturer: BJORN EVAPORATOR Model: ELT 200 Year of Manufacture: 2004 The evaporator was installed and commissioned and dismantled in October 2022 (Stored , not operational) Electrical Specifications: - Voltage: 3 × 400 V + 0 + Earth - Frequency: 50 Hz - Maximum Fuse: 3 × 150 Amp Find more here - .ucymachines/ Contact us at - sales@ucymachines