peripheral equipment (e.g. heating,cooling,drying) used for sale (249)

used hydraulic unit with accumulator

Stock no.: 503260 Machine/ Device Type: Dry Air Dryer Manufacturer: Anvil+Longleg Type: Sectional dryer H150 Year of construction: 2011 Sectional dryer H 150 with 8 sectional boilers à 100 l Tank capacity: 8 x 100 L Air flow: 400 m³/h The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the dryer system adapts individually to the operational requirements and can be realized in the smallest space. The dryers work dew point controlled and with an energy-saving heat exchanger. Depending on the production requirements, the air flow rate is regulated between 140 and 400 m³/h by process control. Each dryer boiler has an individual temperature control. A separate scanning of the dry goods prevents overdrying and insufficient Drying due to excessive material removal.  ...

This Collin inspection system has been in the machine storage at Plastima Used Machinery since 2021. The machine is from 2007 and has a normal number of working hours for its age. – Brand : Collin Pilot & Lab Solutions – Fashion model : Coficos AIS – Construction year : 2007 – Working hours : NB

Robot Robot FANUC typ S 430 IL // Price 5.000 Euro

Connected load: 0.77 kW

CONVEYOR STATION LORANDI / OLI / SIPA 30/15

1 pc flame pretreatment system with electronic control 1 pc EF 600-1 Burner control consisting of Electrical control with ignition and monitoring device for 1 pc burner, control electronics, control panel with plain text display, Emergency stop setup and interface for external control Mechanical control with Safety valves, gas/air mixers, thermoanemometrial mass flow meters for air and gas, Engine valves, pressure monitors for overpressure and vacuum monitoring and supply air blowers. 1 pcs C24-2300 Film burner, 2200 mm working width, adjustable up to min. 1000 mm with connections for water cooling and water-cooled double T-beam 1 pc spare parts consisting of 2 earth replacement electrodes and 1 replacement fabric Power supply : 400/230 V 50 Hz, 2.5 kVA Gas supply : Natural gas 75 – 100 mbar Heat output : max. ...

Temperature control units GWK central cooling system, project number 21 8729 Designed for: Cooling capacity 300 kW; at max. ambient temperature 32°C and cooling water flow temperature 20°C Composed of: Temperature control unit burner cooling Teco WCC100 / power 13.3 kW, nominal voltage 20.5A Temperature control unit heating roller 1 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 2 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 3 Tecma Wi 7.700.150D.150.D25, power 7.5 kW, nominal voltage 15A Temperature control unit cooling roller 4 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A Temperature control unit cooling roller 5 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A

Surface treatment of plastic films by flame treatment to increase surface tension Field of application: Plastic films Machine unit existing main components • PSA Reversible Unwinding & Reversible Winder 2200/12 PSA W/ARW 2200/12 – Fyling Splice Comm. 2011-001.1 • Hill/ Jungwirth burner unit for gas/air mixture • Suction • Erhardt+ Leimer web edge control • OCS camera system for error detection • Semket labelling system Marking of defects • GWK temperature control units for roller cooling

Plant number 701-246; medium used radionuclide Krypton 85 Type: X1114 Specifications: Connection voltage: 40V +/- 10%, 3 phases, 50 Hz, N, PE Basis weight measurement: measuring range 30-600 μm PA; Measurement accuracy +/- 2; Sigma range (+/-0.4% but maximum +/- 0.4 μm), Measuring gap 10 mm Traverse: maximum useful width 1970 mm, traverse speed 0-10 m/min Ambient temperature: sensors 0-50°C, traverse 0-50°C, control cabinet (control) 10-35°C Humidity max. 90% without condensation

Both filling stations are in good condition, little in use.

Suction conveyors with side channel compressor and time control various capacities available

Suction conveyors with 3 kW side channel compressor various capacities available

Vacuum pump

machine measurements: 2.000 x 1.300 x 1.800 mmmachine weight: 1.500 kgpower capacity: ca. 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 2.900 x 700 x 1.700 mmmachine weight: 400 kgpower capacity: 2,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 1800 x 2300 x 2300 mmmachine weight: 1800 kgpower capacity: -- kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: unbkt lcoolant: unbkt pressure: unbkt ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling capacity: 3000 kcal/hcoolant: dest. Wasser tank: 7,7 lvolume capacity: 3 l/minoperating pressure: 3,25 barconnected load: 0,5 kVAconnected load frequency: 380 V• water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

60 x 300 cm without stand

Key data: 95 , 9

Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.

Tempering device Hahn Automation Built: 09/2010, occasionally worked Weight: 600 kg Heating: 2x 24kW , 80 A Pumps: 2x 3.0 kW , 20 A

Continuously working melt filter New and unused machine Visit possible by arrangement.

Motan conveyor incl. rotary wing level monitoring

Cooling capacity 60 kW, Number of compressors: 1, Refrigeration circuit: 1 Cold water flow: 20°C Cold water return: 15°C at air inlet 42°C, Total water circulation: 12.7 m3/h Tank volume: 330 liters

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

Robot DAL MASCHIO DM 3E 2800 for big injection moulding machine 1600 ton // condition - perfect // Price 12.000 Euro

Chiller Green Box Twin 61 2006 year Price 4.500 Euro probably damaged evaporator // controller - o.k. // two compressor - o.k.

Chiller Green Box Multi 156A 2006 year probably damaged evaporator // controller - o.k. // three compressors - o.k. // one compressor probably dameged Weight - 4000 kg

ready to work