presses for wood used for sale (284)

Frame Press - Edge Press Standing / Vertical workpiece dimensions - Solder: 2500mm - Width: 1250mm Press pressure motorized, 3-stage

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

SERGIANI 2 - Floor Continuous Press Model Leopida/Leomatic Slide-in table 6,000 mm x 1,400 mm Press 5,000 mm x 1,400 mm Discharge roller conveyor 4,000 mm x 1,400 mm

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

For sale second hand briquett press made by DIPIU. Completely renewed with overhauiln. Model MB 70. Price: 69.000 EUR EXW

For sale second hand briquett press mde from CF Nielsen, model BP 6500, cy 2008, well condition. Price: 95.000 EUR

Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 1998. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

I sell a body press for furniture element mount RAMARCH PN31. Year of construction 2002. Material size 2500 x 1300 x 600mm Electropneumatic operation. Manufacturer: RAMARCH, Spain. (But already DYNMA) Very good condition. Available the same.

SPECIFICATIONS: Vertical frame press for windows and doors Hydraulic operation machining length mm: 3,000 machining height mm: 2,000 Installed capacity KW: 1.6 Beam 2 horizontal bars 3 Vertical bars with pusher

Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

SPECIFICATIONS: Membrane press for gluing doors, curves and other wooden elements Dimensions mm: 2400 x 1120 Heating by electrical resistance Complete with decompressor, timer and tarpaulins

Working width: 3500 mmWorking height: 2650 mmNumber of cylinders: nach Wahl St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3000 mmWorking height: 2000 mmNumber of cylinders: 5 St.S&S Frame Press, Type T 35 – CE Version-------------------------------------------Working width: 3000 mmWorking height: 2000 mmManufacturer’s Technical Description:Item 100001931 S&S FRAME PRESS, Type T 35Item 200003701 Medium-pressure beam with double-acting pressure cylinder, weightcompensation, pressure hose, and shut-off valve, up to 2000 mm highSturdy welded frame construction made of thick-walled special hollow sections,sliding carriage and pressure beam with 50 mm hole spacing.Continuous abutment on the left side for wide-span compaction, lower abutmentin 2 levels.Vertical press cylinders mounted on special pressure beams with one-hand quickadjustment and weight compensation, height-adjustable in 50-mm hole spacing.Long sliding carriages ensure the long-term absorption of high pressing forces.Quick, smooth  ...

Working width: 3500 mmWorking height: 2300 mmNumber of cylinders: 4 St.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tstroke: 300 mmtable surface area: 1200 x 700 mmram surface: 1200 x 700 mmdayligth: 500 mmadjustment of stroke: 300 mmreturn capacity: 348 kNcapacity of ejector: 100 kNejector stroke: 100 mmtotal power requirement: 65 kWweight of the machine ca.: 28 tdimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m= Frame pressAccessories: tool changing table- next safety inspection according to stamp 05/2021 -- with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 4000 mmWorking height: 2600 mmNumber of cylinders: 6 St.weight: 2000 kgDimensions (L/W/H): 5550x1300x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Working width mm: 3000 Working height mm: 1700 Downholders: 4

Working Sizes: 1300 x 3500 mm

Working Sizes: 1300 x 3500 mm

Wehmoner Membrane Press

Pressing length: 3200 mm Pressing height: 2000 mm Functional principle: Hydraulic (horizontal/vertical) Space requirement mm: 3500 x 1200 x H 2750

Blum Drawerpress ZZM 6300 Boxpress year approx. 2000 Length of runner min 270 mm, max . 650 mm Carcase width min. 300 mm, max 1200 mm Bfxt92krpx Thickness of bottom min.13mm, max. 16 mm Dimensions of machine LxBxH approx. 2000x1200x2000mm Weight 450 kg

Approx. 50 pieces of press moulds for round elements Dimensions: 1000 mm x 1200 mm

EinspannmaÃ?e: 1600 mm x b: 2900 mm frame: 1600 mm x b: 2600 mm â?¢ Pression-Druck by 1T, self-locking, 140 mm â?¢ Versatility - many applications (frame, body, surface gluing) â?¢ Workload - ergonomic posture â?¢ Save time with user-friendly operation â?¢ Frame are bolted and therefore can be disassembled â?¢ Pressing units galvanized G & FE-RPW-3000PL

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails

In 2007 Floor press from BÃ?TFERING, type 4 H 100,. Lower piston design Pressing area of 1250 x 2200 mm Aluminium plates electrically heated Total pressure of 100 to Operating pressure 320 bar spec. Pressure 3.5 kg/cm2 with full interpretation spec. Pressure at 80% design 4.5 kg / cm2 Hydraulic power 380 volts, 50 Hz, 1.5 kW Press plates: 2 piece ELKOM electric heating Panel solid hard aluminum in the thermally stable sandwich construction for temperature applications up to 200 ° C 2200 x 1250 x 18 mm + 19 mm Mono Lux + 19 mm V 100 insulation plate 17,500 Watts, 400 volts, 3 Ph. Surface smooth, flat, screw-free, gold anodized Plate construction hides more-row from the bottom screwed maximum continuous temperature 200 ° C incl. 2 piece cooling plate in Sandwitchbauweise. This is mounted below the insulation. The heatsink must be with a cold ...

Hydraulic glue press with heating base, infinitely variable temperature setting, stuffenlose setting of the adhesive holding time, Power: 5 kW, 380 v 50 Hz; Two-hand operation.