presses for wood used for sale (308)

mechanical briquette press briquetting press chip press defective SPÄNEX Type: KS7 Total motor power 13.2 KW Pressing capacity up to approx. 300 kg/h Briquette diameter approx. 50 mm The machine has been in my warehouse for several years. In the briquette press, the brass bearing of the crankshaft is worn. The bearing bushes would have to be replaced. The control system would have to be checked. It is sold as it is, because I clean up my stock. Documents on the machine are available. Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading op ...

Complete clean air extraction system with briquette press and piping with gate valves, etc. Extraction system for woodworking companies with briquetting press undermounted. Aspirator ALKO Type: MOBIL-JET 250 Year of construction 2003 Extraction diameter 250 mm Nominal capacity 4900 m³/h Motor power 6.5 KW Dimensions approx. 330 x 135 x 2.95 cm with suction control for automatic slide control. Briquette press WEIMA/ ALKO Type: APC30S Year of manufacture 2007 Motor power 5.5 KW Pressing capacity 30 - 50 kg/h Briquette diameter approx. 50 mm incl. complete piping with branches, bends, valves. there would be another batch of extraction pipes with fittings, which can be purchased cheaply. Plant has been dismantled and packed ready for loading. Condition see pictures, or follow the item description. Parts can also be picked up ...

Frame press Hess Type VARIANT Machine No. 2182 Built in 1979 Pneumatic Frame Press Workspace 3700 mm x Height 2300 mm 4 bars with pressure cylinders from above Stop side left 1 movable pressure bar from the right with 2 pressure cylinders Cylinder stroke 110 mm Compressive force per cylinder 1100 kp (1kp = 1kg) Compressed air connection max. 15 bar Weight approx. 550 kg Exterior Dimensions 4400 mm x 700 mm x H 2800 mm Loading dimensions 4400 mm x 600 mm x H 2300 mm + Pallet with pressure beam 2800 mm x 800 mm x H approx. 700 mm

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

New longitudinal veneer splicer Brand: CASATI Type: LINEA 1250 Technical details: Arm length 1.250 mm Veneer thickness 0,4 - 4 mm Min. veneer length 350 mm Min. veneer width 45 mm Glue for pre-gluing: Urea and PVA Glue for integrated gluing: Urea Feed speed 10 - 40 m/min. Heating area length 1.250 mm Total connected load 7,4 kW Power consumtion approx. 6 kw Compressed air consumption 5 Nl/min Compressed air pressure 6 - 8 bar This machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. Its also possible to bond pre-glued veneer sheets Option for an extra charge: Cooling device for the glue po ...

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Vacuum diaphragm press Wemhöner type VARIOPRESS model Basic 1000 S Specifications: Heating plate format (mm): 2850 x 1550 Electric heating plate design: aluminium top heating plate Total pressing force (kN): 2400 Chamber pressure max. (bar): 6 Operating temperature max.: 180 degrees Celsius Batch or workpiece size max. (mm): approx. 2460 x 1180 Thermoplastic film as roll goods: Width of the film: approx. 1430 mm Thickness of the foil (mm): approx. 0.25 - 1 Hyperbaric chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Continuous veneer press panel size 3200/1400mm External and inner hydraulic cylinders Press pressure can be adjusted separately Panel heating steam and electricity

Continuous body press press press 2400/1500/650mm Automatically adjusts to the respective body size Works perfectly

Working width: 120 mmWorking height: 1200 mm: 6000 mmNumber of cylinders: 12 St.1 pc. LAMINATION PRESS Type SLV - H - 6.0 - 1.2 - 120 - 6V - II -P--------------------------------------------------------Technical specifications-------------------------------------------------------- working dimensions:Length: 6000mmHeight: 1200mmGluing thickness: 20 - 120 mmNumber of pressure cylinders: 12 pcs.Cylinder type: Ø 63 x 120 mmMax. force per pressure cylinder: 50 kNSpecific pressure: 7.5 kg/cm2Number of hold-down devices: 6 pcs.Cylinder type: Ø 40 x 100 mmMax. force per hold-down device: 20 kNNumber of sections: 2Max. pressure: 160 barPower: 3.0kWPump flow: 10L/minManual control with hydraulic valvesevery work surface in contact with glue is covered with INOX Materilacoveredeach pressure cylinder and the hold-down device can be locked separatelyequal pressure in each sectionThe press can be e ...

PART NUMBER: 7553 Specifications: - dimensions of the hobs 2550x1100mm - number of batches 1 - electrically heated shelf - ground clearance 360mm - Number of cylinders 4 - cylinder diameter 80mm - emergency disconnection of the machine - total power 15.5kW - 1.5kW pump motor - dimensions length/width/height 2900x1300x2100mm - weight about 3000kg ADVANTAGES – made in Germany – electrically heated shelves – golden shelves – unpainted – very good condition – used press Net price: 27900 PLN Net price: 6488 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

PART NUMBER: 7552 Specifications: - dimensions of the hobs 2550x1350mm - number of batches 2 - electrically heated shelf - total ground clearance 400mm - Clearance between shelves 280mm and 100mm - Number of cylinders 4 - cylinder diameter 90mm - 1.1kW pump motor - total power 31.3kW - dimensions length/width/height 3050x1600x2200mm - weight about 3500kg ADVANTAGES – made in Germany – electrically heated shelves – unpainted – very good condition – used press Net price: 28900 PLN Net price: 6721 EUR depending on the price of 4.30 EUR (Prices may change with higher fluctuations)

Gluing stars Polzer Floor gluing press Type: EVA - 6 E Year of manufacture 1989 6 gluing shelves with 2 special heating plates each Gluing dimension 2100 mm x 1100 mm With Leimangabestation With 2 lifting devices for loading and removing the panels With roller conveyor Workpiece thickness maximum approx. 50 mm For removal, the plate is pneumatically lifted Per floor: 7 pneumatic pressure cylinders 100 mm diameter, 100 mm stroke, compressive force 740 kg per cylinder, Movable pressure plate 250 mm x 40 mm 2 cylinders to operate the upper heating plate Insertion opening 700 mm 2 electric heating plates Each electric heating plate 220/380V, 3 kW, thermostats 0 – 120°C Operating pressure 8 – 10 bar Gluing temperature adjustable, ideally 50-65° Capacity approx. 50 m²/h With protective grille External dimensions approx. 4000 mm x 4000 mm x 3600 mm

Code: 0024 Brand: ITALPRESSE Model: NUOVO/SP Quick setting semiautomatic case clamp Technical data Manual loading Max useful dimensions mm 2500 x 600 x 1250 Min useful dimensions mm 250 x 600 x 280 Motorized horizontal cross-beam with display Vertical beam setting N° 6 vertical cylinders N° 6 horizontal cylinders Cylinders stroke mm 70 Cross-beam stroke mm 920 Installed power Kw 0,55 Overall dimensions mm 3600 x 800 x 2550 h Weight kg 1400

Plate length 4000 mm, plate width 2700 mm, 480 T printing, Plate opening 100 mm, one tier, heating plates with thermal oil, 15 KW

Gluing star with heating plates. Connection 30 KW. Four pressing surfaces. Hydraulic, pneumatic. Further dates will follow.

pressure: 7 tthroat: 180 mmstroke: 100 mmtable surface area: 300x300 mmram surface: Ø105 mmhole in the table: Ø60 mmtable height: 1050 mmtool hole in ram: Ø30 mmtotal power requirement: kWdimensions of the machine ca.: BxTxH 1200x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tdistance between columns: 450 mmstroke: 100 mmtable surface area: 440x320 mmram surface: Ø140 mmhole in the table: Ø50 mmtable height: 900 mmtool hole in ram: Ø40 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: BxTxH 1400x1200x2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tdistance between columns: 800 mmstroke: 100 mmdayligth: 450 mmtable surface area: 750x750 mmweight of the machine ca.: 3 tdimensions of the machine ca.: 1500x1500x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 275 mmstroke: 150 mmtable surface area: 860x550 mmram surface: 600x400 mmtable height: 810 mmtool hole in ram: Ø 50 mmdayligth: max. 475 mmweight of the machine ca.: 7 tdimensions of the machine ca.: BxTxH 2000x2500x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tdistance between columns: 625 mmstroke: 150 mmtable surface area: 580x450 mmram surface: 580x340 mmhole in the table: Ø 150 mmtable height: 850 mmtool hole in ram: Ø 45 mmcolumn travel -side: 200x200 mmweight of the machine ca.: ca. 6,0 tdimensions of the machine ca.: BxTxH ca. 1300x1300x2750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Body Press Frame Press Body max. 3000 x 2000 mm Protective fence system Sick C2000 Safety Light Curtain Beijer Electronics E300 Operator Interface Control Panel Workpiece Discharge Roller Timing Belt Conveyor Switchboard Mitsubishi Q2ASCPU programmable logic controller Mitsubishi A1SX81 Guarding The C 2000 safety light curtain serves as a hand guard for Securing danger points on machines and systems. More items - new and used - can be found in our shop! International shipping costs on request!

ZIM Hülsta Carcase Erector The carcass erector is used for erecting and transporting assembled carcasses. Carcase erectors are usually used for carcass presses with a continuous device. It facilitates handling when setting up large workpieces. Transport and assembly device within a corpus assembly line. Behind a continuous carcass press, the pressed carcasses are placed on the back with the help of this device. Assembly work on the underside can thus be carried out. Make: ZIM Hülsta-Werke Type: Carcase erector Metrics: More items - new and used - can be found in our shop! International shipping costs on request!

ZIM Hülsta Cabinet Press NOW Easy Make: ZIM Hülsta-Werke Type: NOW Easy Ser.-No.: 380125028 Body max. 260 x 1100 mm 2 supports at the bottom, sliding 2 press beams at the top, movable Beckoff Control Panel Roller track 4500 x 600 mm Roll width: 500 mm Overall dimensions: W x D x H 3300 x 1800 x 3600 mm More items - new and used - can be found in our shop! International shipping costs on request!

Connected load 380V 16A Pneumatic connection 6bar Total length of the machine 4300 mm Total width of the machine 1300 mm Highest press length 2650 mm Press width 1000 mm Press height 1000 mm Press pressure up to 150 bar Electric width adjustment with digital display Foot switch for pressing

Connected load 380V 3.5A Pneumatic connection 8 bar Total height 3600 mm Overall length 4400 mm 1x fixed stop 2x pressure beams - can be clamped over rack 2x pressure cylinder stroke 100 mm pneumatically clampable 1x manual control for transverse and longitudinal pressure and loosening presses 1x medium pressure beam 600 mm height (working area) 1x additional longitudinal pressure cylinder 1x slanted window pressing device

pressure: 250 tdistance between columns: 900 mmstroke: 300 mmtable surface area: 850x900 mmram surface: 800x880 mmstroke: 300 mmtable height: 1050 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.