presses for wood used for sale (308)

Plate dimensions: 2200 x 1100 mmDaylight opening: 350 mmNumber of daylights: 1 St.Heating: elektrisch Specific pressure: kg/cm²Total pressure: 65 toMotor output: 1,1 kWDimensions (L/W/H): 2540 x 1280 x 1900 mmweight of the machine ca.: 2500 kgYear: Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, mold gluing, mold veneering, edge banding, etc. With this press, you can do without a hydraulic veneer press, with some restrictions. New heat-resistant silicone membrane, extremely stretchy and easy to clean. Can also be used for forming preheated thermoplastic materials such as acrylic glass or solid surface materials. Inner frame dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks each 200 liters, thus comfortable working, fast evacuation. Electronic vacuum pressure switch, which means that the pump switches off when the vacuum is reached and does not run constantly Mobile on four swivel castors, lockabl ...

TECHNICAL DATA: Electro-hydraulic frame press Working dimensions: 6300 x 1300 x 200 mm 18 vertical press beams Compressive force of vertical press beams: 7200 kg 06 Front press beam Installed power: 5.5 kW

work piece width: max ~ 100 mmworkpiece height: max ~ 100 mmcycle time: 4 secMitre jointing machine Himmel type HF120 for precise and firm gluing of mitre joints in wooden frames, glazing bars and battens with white glue. The machine enables a fast setting time thanks to high-frequency technology, pneumatic pressing mechanisms and exact alignment of the workpieces. Ideal for furniture and picture frame construction.The glue must be applied manually as the machine does not have a glue container.Operation: Foot switchPossible angles: 90°, 120°, 135°Machine without functionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corpus press manufactured in 2003. This PRIESS U HORSTMANN KP-5-CNC + ZWA-1-CNC + Buffer features workpiece dimensions with a cabinet height ranging from 300 mm to 2500 mm, a width of 300 mm to 1300 mm, and a depth of 160 mm to 700 mm. It requires a minimum room height of 3700 mm and operates at a working height of 930 mm. If you are looking to get high-quality veneer processing capabilities, consider the PRIESS U HORSTMANN KP-5-CNC + ZWA-1-CNC + Buffer machine we have for sale. Contact us for further details.

Laminating press manufactured in 2008. This Barberan PUR 46 L features a total power of 45.5 kW and operates at a voltage of 400 V. The machine dimensions are approximately 7000 × 1350 × 2100 mm, with a weight of around 2200 kg. If you are looking to get high-quality laminating capabilities, consider the Barberan PUR 46 L machine we have for sale. Contact us for further details regarding this machine.

Laminating press manufactured in 1998. This Bürkle EKMH 1300 features a working width of 1300 mm and is equipped with a new Siemens Simatik KMG Touch control system. It includes a Bürkle GLK calender, film holder, saw for trimming excess material, and two GWK temperature control units. If you are looking to get high-quality laminating capabilities, consider the Bürkle EKMH 1300 laminating press we have for sale. Contact us for further details regarding this machine.

A molded part press Italpresse for the woodworking and furniture industry is available. Motor power: 160hp, Press force: approx. 160t, Cylinders: 2, Weight: approx. 17600kg. An on-site inspection is possible.

A heated plate press Italpresse is available. Press force: 180t, max. hydraulic pressure: 600bar, cylinder stroke: 325mm, opening: 325mm, max. temperature: 300°C. An on-site inspection is possible.

Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

A heated platen forming press Italpresse in bottom piston design is available. Press force: 660t, platen dimensions X/Y: 1900mm/1600mm, heating power: 31kW, connected load: 108kW, rapid stroke cylinder diameter: 70mm, weight: approx. 28000kg. Documentation available. An on-site inspection is possible.

length: 2.800 mmwidth: 600 mmheight: 1.800 mmNumber of pressing cylinders: 6 Stk.work height max.: ca. 1.000 mmSolid pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders.One cylinder without pressure shoe.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards

hydraulic PRESS with hot platens by with thermal oil model COLOMBO REMO second hand machine DRILLED SOLID STEEL PLATEN for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3450 x 1400 n.08 cylinders diam.mm. 80 max. thrust Ton. 150 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 4 heating by with thermal oil weight kgs. 9.500 volt. 380/50

hydraulic press with hot platens by with thermal oil model COLOMBO REMO second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm. 80 max. thrust Ton. 120 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 3 heating by with thermal oil weight kgs. 5500 volt. 380/50

Dimensions (L/W/H): 2920x980x1450 mmWeight: 1500 kgTotal power requirement: 11,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Frame press Hess hydraulic Type: HYDRO-LUX Crimping dimension approx. L 3550 m x W 2250 mm Connected load 380 V / 50 Hz 2.6kw Hydraulic Pump Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm 0 - 8 bar pneumatic Optoelectronic measurement query. The window scantlings are placed in the feed channel so that the photoelectric sensor can measure whether the pressure beams and press corners need to be opened or closed. If the light beam of the probe hits the window scantlings, the machine receives the command to drive up in width and height until the working dimension is reached. Workflow: Automatic dimensional adjustment loose insertion Automatic pressing process loose presentation remove Automatic dimensional adjustment Program selection options in the control system: 1. Automatic measurement adjustment via optoelectronic measurement query with a ...

ORMA 3-deck press NPC 26/14-3V + Höllenholscher Kühlstern discharge from site for sale.

Wemhöhner VOF2-250/2 continuous press line complete from location 98693 Ilmenau OT Langewiesen for sale.

Briquette press Spänex SHB 250 Year of construction 2019 Briquette size: 72 x 127 mm - 8 square Pressing capacity: 250 kg/h (depending on material) Oil cooler System pressure: 280 bar Total connected load: 14 Kw Control: Siemens Simatic HMI Hours: 7900 Material silo Spänex type R III-F Dimensions: 2.20 m x 2.20 m x 1.80 m (without feet and blow-in housing) Total body height: 3.50 m Including rotary valve and agitator

Panel dimensions 2.2x1.25 m The machine is functional, but the cylinders are leaking. The sale is in the condition as it is, excl. Warranty, from our warehouse in Düsseldorf, freely loaded.

This F&O 03035 laminating press was manufactured in 2003. It features a working width of 1300 mm and a melting unit capacity of 200 kg. The outfeed roller conveyor is approximately 9000 mm long. In 2024, the infeed conveyor was upgraded with 4 brushes and radiant heaters. Consider the opportunity to buy this F&O 03035 laminating press. Contact us for more information.

Dimensions (L/W/H): 1400x2450x2800 mmTotal pressure: 400 toweight of the machine ca.: 12000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press modul for production of CLT panels. Used for test production of different CLT and hybrid panels.

Veneer press Bürkle With 2 floors Type S 100 250/130 Panel size 2550 mm x 1300 mm Deck press with 2 shelves Maximum opening between the panels approx. 350 mm Hydraulic Press Cold Press Press force 100 tons. Surface pressure 3.1 kg/cm Number of cylinders 6 pieces Piston diameter 80 mm Rack and pinion guide Rated current 5.4 A Frequency 50 HZ Current type 3 PH Operating voltage 3 PH Dimensions approx. 3350 mm x 1525 mm x H 1845 mm

This BURKLE BTF 1628 laminating press was manufactured in 1998. It features a max panel size of 1250x2550 mm, panel thickness range of 6-35 mm, and a heating plate dimension of 1600x2800 mm. Equipped with a Siemens control system and a total power requirement of 38 kW. Consider the opportunity to buy this BURKLE BTF 1628 laminating press. Contact us for more information.

This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information.

This HRB HRB-1450F was manufactured in 2021. A robust laminating press, it handles a maximum sheet size of 1450 × 1200 mm and operates at speeds up to 6,000 sheets/hour. Powered by a 380V / 50Hz supply and weighing approximately 5,000 kg, it remains in excellent condition and is still in production. If you are looking to get high-quality laminating capabilities, consider the HRB HRB-1450F machine we have for sale. Contact us for more information.

This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information.

This thermo lamination system was manufactured in 2001. The BÜRKLE FFAII 1300 features a working width of 1300 mm and handles panel dimensions from 200 to 1300 mm in width and 400 to 3000 mm in length, with thickness ranging from 8 to 40 mm. It includes a thermal oil heater, smoothing calender, and a comprehensive transport and laminating system. Ideal for high-efficiency thermo lamination processes. For more information about this thermo lamination system, please reach out to us.