presses for wood used for sale (284)

pressing area: 3000mm x 1900mm; pressing units vertical: 3; pressing units horizontal: 2; pressing system: elctro - hydraulic; machine length: 3500mm; machine width: 1000mm; machine height: 2600mm; waight: ca. 900kg;

pressing area: 2200mm x 1100mm; opening: 400mm; heating: electric; plate surface: ALU; Emergency stop switch: yes, ripcord; pressure: 60t; number of cylinder: 4; current consumption: 17A; machine length: 2500 mm; machine width: 1300mm; weight: 3000kg;

pressing area: 3000mm x 1300mm; opening: 450mm; heating: electrically / thermo-oil; max. temperature: 120°; plate sourface: stainless steel; press opening: automatically - timer / manual; emergency stop switch: yes / ripcord; pressure: 120t; number of cylinder: 6; electriticy: 36A; motor power: 21 kW; machine length: 3600 mm; machine width: 1800mm; weight: 4500kg;

pressing area: 2500mm x 1250mm; opening: 360mm; heating plate top: elektric; heating plate bottom: defective; plate surface: ALU - anodized; pressure: 90t; number of cylinder: 4; electricity: ca. 33A; machine length: 3000 mm; machine width: 1500mm; weight: 4000kg;

pressing area: 2500mm x 1100mm; opening: 400mm; heating: elektrisch; plate surface: ALU - Gold eloxiert; Emergency stop switch: yes; pressure: 65t; number of cylinder: 4; electricity: 22A; machine length: 3500 mm; machine width: 1300mm; weight: 3000kg;

working width: 630mm; feed: 7m/min;

TECHNICAL DATA: Working area: 3000 x 1300 mm Pressure plungers: 06 Press piston with Ø 70 mm (stroke 260 mm) 02 Reciprocating piston with Ø 40 mm (stroke 270 mm) Stop piston: 04 Piston for closing with Ø 70 mm (stroke 260 mm) 02 Opening piston with Ø 40 mm (stroke 270 mm) Installed power: 22 kW EQUIPPED WITH: Loading bench with pusher Discharge bank Boiler for heating diathermic oil

Self-loading baler GRECON DIMTER ProfiPress PP 2500-3HF Working length 2500mm Working width 1300mm Automatic material loading Automatic glue application Shelves heated by a high frequency generator Material thickness softwood min/max 11-60mm Material thickness hardwood min/max 11-40mm Material width min/max 30-150mm Length of the fed material min/max 300-2500mm Year of manufacture 2001 CE Certificate

L. 2500 x B. 1300 Bürkle Veneer press 6 Column Cylinder 98 tons of pressure Heating plates Safety line Immediately available

Code: 0479 Brand: SIPA Model: S20F Hydraulic cold press for panels, doors, furniture, timber, composite materials, engineering materials, plastics, aluminium and other materials Steel frame Platen dimensions 2500 x 1300 mm Platens opening 500 mm Total pressure 20 t N° 2 cylinders diameter 40 mm Motor power 1,5 Hp Overall dimensions mm 2800 x 1300 x 2110 h Weight kg 740

Code: 0478 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Type EURO SPECIAL Max. working width: 3250 mm Max. working height: 1850 mm 4 vertical + 2 horizontal hydraulic cylinders. Motor power of hydraulic unit: 1.5 kW 380 V Made in Germany 1978 Transport dimensions 4100x1100x2700 mm Weight 980 kg Price 2350 Eur (EXW Jonava, Lithuania)

Motor Power 200 kw Dics diameter 6 mm Used for wood pellet production Can be inspected under power

A deck press, also suitable for the production of armor plates Make: Becker&Van Hüllen Pressing force 5000 tons 10 floors heatable 3.0 meters x 1.30 meters Control New from Stadthagen

pressure: 250 tdistance between columns: 600 mmstroke: - mmtotal power requirement: 22 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 2 x 2 x 3,2 mNo. 3421Mould press 2500 / 700 kNSingle stroke 2-handSingle stroke foot switchAutomatic continuous run set-up and tippingTable 500 x 500Working range: Pressure capacity 250 tonnesDrive: ^22The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 ttable surface area: 2100 x 1400 mmpassage width: 2122 mmtotal power requirement: 60 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mPress/punch with injection molding unit200 ton punch upstroke press with injection molding machine (400to)Additional guard locking via 4 power strokesManufacturer: R+S TechnikYear of construction: 2013 / rebuild 2016Mains voltage/frequency: 400V/50Hz 3~(N/PEConnected load: 60KWWeight about 35000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 tram surface: 3600 x 2500 mmstroke: 350 mmControl: Siemens S 7 no. of strokes: 11 - 44 Hub/mintable surface area: 3600 x 2500 mmram adjustment: 400 mmmaterial width: 500 - 1950 mmmaterial thickness: 0,6 - 2,5 mm mmcoil weight: 35 tcoil external diameter: 900 - 1900 mmcoil internal diameter: 610 mmno. of straightening rolls: 13 straightening roll diameter: 50 mmStack height: 400 mmstations: 2 total power requirement: kWweight of the machine ca.: 390 tdimensions of the machine ca.: mwith reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 tdistance between columns: 3550 mmstroke: 1100 mmdistance table/ram, max. stroke up, adjustment up: 1900 mmtable surface area: 3500 x 1800 mmdie-cushion pressure inside the table: 350 tstroke of drawing cushion in table: 295 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in pusher: 160 mmram surface: 3500 x 1800 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled sliding table: without rails for travel total power requirement: kWweight of the machine ca.: 265 tdimensions of the machine ca.: moverhauled in 1998The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 tdistance between columns: 2560 mmstroke: 1050 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1870 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 395 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 200 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1600 tdistance between columns: 3160 mmram stroke: 1450 mmdistance table/blankh.,max. stroke up,adjustm. up: 2250 mmtable surface area: 4000 x 2200 mmram pressure: 1000 tpressure of blank holder: 600 tstroke of blankholder at the bottom: 1000 mmstroke of blankholder with adjustment 0-100 mm: 1450 mmblank holder size: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 275 / 400 mmram surface: 4000 x 2200 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 ltotal power requirement: 390 kWweight of the machine ca.: 250 tdimensions of the machine ca.: 6,0 x 4,3 x 10,5 mHead press (1600 tons) of a press line with five subsequent presses (800 tons)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 64 - 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg

Industrial pellet press manufactured by Bühler, model DPUC, designed for the continuous production of pellets from different raw materials. The equipment incorporates a 6 mm die and is prepared for a capacity of approximately 2.5 tons per hour, depending on the product and process conditions. The press is equipped with a roller compression chamber, conditioner for product pre-treatment and support bed. The assembly is complemented by a stainless steel worm conveyor, intended for feeding or evacuating the product in the pelletizing line. Technical characteristics DPUC Model Year of manufacture 2005 Production 2,500 Kg/h In your state