milling machines used for sale (2,467)

x-travel:630 mmy-travel:200 mmz-travel:360 mmtotal power requirement:7,5 kWweight of the machine ca.:2,5 tdimensions of the machine ca.:1500 x 1800 x 1900 mmspindle taper:SK40 table-size:250 x 1100 mm

x-travel:500 mmy-travel:400 mmz-travel:330 mmtable-size:400 x 710 mmspindle taper ISO:40 quill stroke:100 mmcontrol:HEIDENHAIN TNC 335 table load:180 kgno. of flutes:8 groove width:14/45 mmtool taper:ISA 40 speeds::20 - 3000 /28- 4000 U/minfeeds:infinitely variable1-1250 mm/minrapid traverse:5000 mm/mintotal power requirement:13 kWweight of the machine ca.:2500 kgdimensions of the machine ca.:2000 x 2800 x 2300 mmDocuments:inkl. Zusatzinformationen ? Schile-Elektroschrank mit CNC-Steuerung Heidenhain TNC 355 ? Starrer Winkeltisch 710 x 400mm ? Spritzschutzverkleidung / Halbkabine ? Kopf nach Skala präzise drehbar über Kurbel ? Kopf komplett wegschwenkbar für horizontal Spindel

x-travel:850 mmy-travel:280 mmz-travel:355 mmtotal power requirement:8 kWweight of the machine ca.:4 tdimensions of the machine ca.:2 x 2 x2.40 mrevolutions per minute: 28-1.400 U/mintable-size:1.200 x 370 mmsurface area:1.060 x 260 mmspindle taper:SK 50

x-travel:560 mmy-travel:500 mmz-travel:450 mmtotal power requirement:16,5 kVAweight of the machine ca.:2700 kgdimensions of the machine ca.:2,30 x 3,0 x 1,90 mcontrol:Grundig quill stroke:80 mmtool taper:SK 40 spindle speeds::40..4000 1/minfeed:2 .3600 mm/minrapid traverse:4000 mm/minDocuments:vorhanden

x-travel:1120 mmy-travel:345 mmz-travel:400 mmtotal power requirement:14,5 kWweight of the machine ca.:3,85 tdimensions of the machine ca.:3.500 x 2.920 x 2.710 mmtable-size:1600 x 400 mmspindle taper:SK 50

total power requirement:2,4 kWweight of the machine ca.:1150 kgdimensions of the machine ca.:1550 x 1615 x 1630 mmtable clamping surface LxW:315 x 710 mmmax. tool weight:200 kgT - slots distance:63 mmT - slots - width:12 mmtaper bore:Spindel SK 40 spindle turning speed range:56 - 1800 U/minfeed speeds:11,2 -355 mm/minDocuments:vorhanden

x-travel:600 mmy-travel:400 mmz-travel:380 mmtotal power requirement:6 kWweight of the machine ca.:1700 tdimensions of the machine ca.:1800 x 2130 x 1980 mmTable dimensions:400 x 800 mmT-slots:7 St.,14 x50 table load:300 kgspindle:SK40 turning speed range:63-250 U/minspeed steps work spindle:18 spindle speeds::50- 2500 n/minfeeds:10-500 mn/minDocuments:vorhanden

MIKRON WF 2 Universal Tool Milling Machine HEIDENHAIN Digital Display Travels: X-axis: 420 mm Y-axis: 250 mm Z-axis: 340 mm Rapid traverse: 1400 mm/min. Feed: 8 – 400 mm/min Table dimensions: approx. 700 x 250 mm Spindle speed range: 50 - 2240 rpm Tool holder: ISO40 With machine vice, jaw width: approx. 110 mm

x-travel:500 mmy-travel:400 mmz-travel:340 mmwork table::800 x 400 mmcontrol:Numerik CNC - H 646 spindle turning speed - stepless:20 - 3000 U/mintotal power requirement:14 kWweight of the machine ca.:2400 kgdimensions of the machine ca.:2100 x 1800 x 2400 mm

x-travel:600 mmy-travel:500 mmz-travel:400 mmspindle diameter:90 mmspindle turning speed range:45 - 2000 U/mintable length:1250 mmtable width:200 mmgroove width:14 mmtable rotating:45 °total power requirement:4,2 kWweight of the machine ca.:2000 kgdimensions of the machine ca.:2000 x 1800 x 1550 mmYear:ca.1957 Documents:vorhanden

Machine number: 2300-0053Speed: 40 – 2,000 rpmTable dimensions: 1,000 x 520 mmNumber of table grooves: 6Travels: X-axis: approx. 500 mm, Y-axis: approx. 400 mm, Z-axis: approx. 300 mmwith swivel table, three-axis digital display (Heidenhain), new bellows, new cranksReference: Showroom/Oberthür

This 5-axis SCHÜCO AS 100 was manufactured in 2022. It features a machine bed length of 9,000 mm and allows for 6-sided processing with two 5-axis towers. The machine includes 5 movable clamping blocks with independent drives and a saw blade diameter of 450 mm. If you are looking to get high-quality profile machining capabilities, consider the SCHÜCO AS 100 universal machining centre we have for sale. Contact us for further details.

This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine.

This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information.

This 4-axis SCHÜCO Profilbearbeitungscenter 299 650 was manufactured in 2004. It features a powerful 21 kW motor and operates at a voltage of 380 V. With a maximum operating pressure of 0.8 MPa and a weight of 5,000 kg, this machine is designed for robust performance. If you are looking to get high-quality machining capabilities, consider the SCHÜCO Profilbearbeitungscenter 299 650 universal machining centre we have for sale. Contact us for further details.

This 3-axis KIESLING Perforex BC1007HS was manufactured in 2015. It features impressive travel distances with an X-axis of 2,500 mm, Y-axis of 1,700 mm, and Z-axis of 315 mm. The machine is equipped with a CNC 4-axis controller and a robust electric spindle capable of speeds up to 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the KIESLING Perforex BC1007HS horizontal machining centre we have for sale. Contact us for further details.

Serial number: 07400003691operating hours read: 88,040Spindle hours read: 43,558Spindle speed range: 3200/5000 rpmRotation diameter: 270 mmTurning diameter: 120 mmSpindle distance: 900 mmTravel X1: 290 mm TravelZ1: 650 mmTravel X2: 180 mmTravel Z2: 650 mmTravel Y1: +- 40 mmTravel Z3: 670 mm TravelX3: 175 mmMax. rod diameter: 100/104 mmSpindle bore diameter: 118 mmRapid traverse speed X- and Z-axis: 30 m/minRapid traverse speed Y-axis: 15 m/minNumber of driven tools per tool carrier: 12Control: SIEMENS SINUMERIK 840 D POWERLINEincl. chip conveyorwith 2 tool turrets - each with 12 tool positionsmain and counter spindles, as well as foot switchesAttention, the machine has the following defects:-the B-axis is defective (sits on turret 1)-the guides and drives are worn according to their age-X2 axle (guide rails) runs a bit crookedin the range of 0.03 mm (would have to be remeasured), sporad ...

CNC TURNING AND MILLING CENTER SPINNER TTS 65 DUPLEX TECHNICAL DATA: Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 80 A TRAVELS: X1 / X2 axis: 180 mm each Y1 axle: ±45 mm Z1 axle: 704 mm Z2 axis: 620 mm E2 axle: 720 mm Rapid traverse X/Y/Z axis: 30 m/min SPINDLE 1: Max. speed: 5,000 rpm Spindle Nose: A6k Spindle bore: 65 mm Bore in clamping cylinder: 65 mm Chuck diameter: 210 mm Drive power: 24 kW SPINDLE 2: Max. speed: 7,000 rpm Spindle nose: Ø 110 mm Spindle bore: 42 mm Bore in the clamping cylinder: 42 mm Chuck diameter: 140 mm Max. chuck jaw weight: 1.25 kg Drive power: 16.5 kW TOOL CARRIERS: 1x 10-fold tool turret 1x 12-cavity tool turret All stations driven (12 stations each) Max. speed driven tools: 8,000 rpm ACCESSORIES: Chip conveyors from KNOLL Tool holders (as seen in the photos, are included) See also video: https://youtu.be/cL16zplqYFQ Reference: Proj ...

Machine number: 1803007Operating voltage: 400 VFrequency: 50 HzRated current: 16 AConnected load: 3 kWSpindle speed: 40 – 2,000 rpmTool holder: SK 40Table dimensions: 800 x 400 mmNumber of table grooves: 8Travels: X-axis: approx. 400 mmY-axis: approx. 400 mmZ-axis: approx. 400 mmwith three-axis digital display (SINO)Reference: Light Mobility

Technical data Manufacturer: DECKEL Model: FP1 Machine Type: Universal Milling Machine Serial Number: 2101-1868 Year of construction control cabinet: 1981 Electrical connection: 380 V / 50 Hz Rated current: 13 A Speed range: approx. 40-2000 rpm (Source: online) 16 speed levels (Source: online) Tool holder SK40 (Source: online) Table size approx. 600 x 210 mm (Source: online) Travel X/Y/Z approx. 300/160/340 mm (Source: online) Machine weight approx. 700 kg (Source: online) Configuration 3-axis Heidenhain digital display (only the display element, displacement meters are not installed) Separate control cabinet available Horizontal milling holder available Swivel work table Coolant system available Machine light available Hand-operated axes Used condition with usual signs of wear and aging No original documents, operating instructions or manufacturer documents available Technical data and ...

Technical data No original documents available. The following technical data have been researched and supplemented on the Internet. Manufacturer: LID Type: FP1 Year of Make: 1980 Serial Number: 2101-1135 Travels: X 300 mm, Y 160 mm, Z 340 mm Spindle holder: SK40 Speed range: 40 - 2000 rpm Speed levels: 16 Table size: approx. 700 x 370 mm Electrical connection: 380 V Motor power: approx. 1.5 kW Machine weight: approx. 730 kg Configuration 3-axis digital display Heidenhain available Coolant pump available Vertical milling head Manual feeds Machine on pallet

Serial number: 07510001241operating hours read: 72,899Spindle hours read: 39,361Control: SIEMENS SINUMERIK 840 DRotation diameter: 640 mmTurning diameter: max. 640 mmTurning diameter Sub-spindle: 400 mmSpindle distance: 1500 mmTurning length:1185 mm Max. workpiece weight: 150 kgSlide path X1: 550 mmSlide path Y1: 180 mmSlide path Z1: 1185 mmSlide path B1: 240 °Slide path X2: 180 mmSlide path Z2: 1050 mmSlide path Z3: 1150 mmSpindle speed range: 3200/4000 rpmRapid traverse speed of slide 1 (X/Y/Z): 40/24/70 m/minRapid traverse speed of slide 2 (X/Z): 24/36 m/minRapid traverse speed of slide 3 (Z): 36 m/minTool holder: HSK 63Spindle speed: 12,000 rpmincl. the tool holders on the turretincl. bar feeder, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, Year of manufacture: 2008, Serial number: CNCDB-08.306, Weight: 1500 kgNumber of tool positions in the chain magazine: 40 piecesAttention t ...

CNC MILLING MACHINE Inv. No. 13.112J1 Make HO-CHUN Type UH-1250A Mach.no. 5123 Control HEIDENHAIN TNC 360 Table 400 x 1,800 mm Longitudinal Travel (X) 1,250 mm Cross Travel (Y) 540 mm Vertical Travel (Z) 470 mm Spindle BT 50 R.P.M. 275 – 2.000 KW 7 Volts 380 Cycles 50

x-travel:1000 mmy-travel:320 mmz-travel:400 mmTable dimensions:1000 x 400 mm

Bokö Universal Milling Machine Hydromill Box dimensions: H:900 W:500 L:600 Weight: 5000kg

adjustment drive of the grinding spind.slide:0,0025 - 0,05 mmtotal power requirement:100 kWadjustment of grinding head slide:150 mmweight of the machine ca.:17 tgrinding spindle drive:2 x 37 kWgrinding width:30-150 mmperipheral speed:34 m/secworkpiece speeds:60 - 300 mm/Sek.grinding height:70 mmgrinding wheel diameter:750 mmgrinding tools:750 x 75 x 350 mmgrinding wheel turning speeds:870 U/Min.max. workpiece diameter:250 mm

Milling machine Maho MH 600E BJ 1986

Milling machine Mikron UME 600 BJ 1997