289 DMG MORI used machine for sale

Key data: 600 mm, 500 mm, 500 mm

CNC 5-Axis Vertical Machining Center DMG Mori DMU 60 eVo Year of construction 2017 Heidenhain TNC 640 ERGOline 2-axis NC swivel rotary table Table size 600 × 500 mm Table load max. 400 kg Table NC Rotary Axis C-Axis 360° Table NC swivel axis B-axis -5° / +110° X 600 mm Y 500 mm Z 500 mm Spindle holder SK 40 BIG PLUS Spindle drive power 25 / 35 kW AC Spindle speeds up to 20,000 rpm. 120 tool magazine slots Operating hours 47,589 Spindle hours 28,638 Offer number MV-6512

Highlights − Linear actuator for maximum precision, dynamics and cost-effectiveness − 6 + 2 axes, 2 Y-axes as standard − 2 tools in use at the same time − Thanks to the conversion kit, the machine can be used as an adjustable spindle stick Technical description I-J10010 GILDEMEISTER SPRINT 20|8 linear CNC Swiss Automatic Lathe TECHNICAL DATA: MAIN SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 1: 80 mm Max. speed: 10,000 rpm Nominal drive power: S1 3.7 kW SUB-SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 2: 300 mm Max. speed: 10,000 rpm Nominal drive power S1: 3.7 kW CNC-CONTROLLED AXES Rapid traverse speed: 40 (30) m/min (Y1 only) Acceleration max. X1: 10 m/s2 Feed force (S1) axis Z1,Z2,X2,Y2: 250 daN Feed force (S1) axis Y1: 500 daN Linear axis feed force X1: 60 daN SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 P ...

Highlights - CNC FANUC 32i - 6 linear axes - 2 programming channels - 2 electrospindles - C-axis standard for main spindle and sub-spindle - 25 Vehicle positions - 4 radial driven tools for slides 1 - 4 radial driven tools for slides 2 - Machining on the main spindle possible with 2 tools at the same time Technical description I-A1023 GILDEMEISTER SPRINT 20|8 CNC Swiss Automatic Lathe CNC CNC FANUC 32i TECHNICAL DATA MAIN SPINDLE Turning diameter max.: 20 mm Stroke Z1: 60 mm 180 (with option I-C1002) Max. speed: 10,000 rpm Nominal drive power S1: 2.2 kW SUB-SPINDLE Turning diameter max.: 20 mm Stroke X2: 220 mm Stroke Z2: 170 mm Max. speed: 10,000 rpm Nominal drive power S1: 1.5 kW CNC-CONTROLLED AXES Rapid traverse speed: 32 m/min Max. acceleration: 5 m/s2 Feed force (S1) axes Z1, Z2, X1, X2: 150 daN Feed force (S1) axis Y1: 370 daN Feed force  ...

Inv. Num. : 9057 Type: CTX 310 Producer: DMG MORI Created: 2004 Parameters: Control system: SINUMERIK 840 D Maximum turning length: 450 mm Max. turning diameter: 200 mm Maximum turning diameter over bed: 330 mm Maximum turning diameter over support: 260 mm Maximum length of travel in the X-axis: 160 mm Maximum feed in the Z-axis: 450 mm Maximum spindle speed: 6000 1/min Weight: 3950 kg

Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spind ...

DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...

CATEGORY — 5 Axis MANUFACTURER — DMG MORI MODEL — DMU 85 MONOBLOCK STOCK NUMBER — ONY100000587 MODEL YEAR — 2013 CONTROL PANEL — SIEMENS 840 D SOLUTIONLINE AXIS STROKE — X 935 MM / Y 850 MM / Z 650 MM ROTARY AXIS MOVEMENTS — A +/- 120 ° / C 360 ° SPINDLE SPEED — 18.000 MIN/-1 POWER CAPACITY-MAIN SPINDLE — 35 kW (40% ED) MAX. TORQUE — 135 Nm (40% ED) TOOL HOLDERS — SK 40 NUMBER OF TOOLPOSITIONS — 30 TABLE SURFACE AREA — 1.000 X 750 MM ( d 850 X 750 MM) MAX. TABLE LOAD — 1.000 KG TOTAL POWER REQUIREMENT — 46 KVA WEIGHT OF THE MACHINE — 13.500 KG DIMENSIONS OF THE MACHINE — 3.15 X 3.92 X 3.21 M

CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Measuring probe  ...

Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 TECHNICAL DATA: 5. Axis 3 + 2 axes non-simultaneous X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 520 Rapid traverse: (X/Y/Z) [m/min.] 30 Max. speed: [1/min.] 12,000 Drive power: [kW] 13 Torque: [Nm] 82 Tool holder: HSK63 Tool positions: 60 NC swivel rotary table B-axis -10° / +95° C-axis 360° Table size: [mm] 800 x 620 Max. table load: [kg] 350 Space requirement (LxWxH): [m] 5.35 x 4.14 x 3 Machine weight: [kg] 4,700 Features: Chip conveyor Internal cooling (IKZ):40 [bar] Tool breakage detection Heidenhain TS 27 R Probe Heidenhain Blum Lasers for Tools Direct Path Measurement System Electronic handwheel Machine preparation for DMG MORI PH 150 - Automatic lifting door on the right - Robot interface (DMG MORI standard) - ...

Used machine CNC Turning and Milling Center Machine Type: CNC Lathe Model No.: NLX2500Y/700 Manufacturer: DMG MORI Control: CELOS Year of Make: 2016 #001252 - Main spindle 4,000 rpm - Clamping cylinder main spindle - 3 cheek chuck - Foot switch (double) for main spindle - Y-axis - 12-speed BMT60-star turret for powered tools - Cantilever length X-axis driven tools 100mm - Scraper belt chip conveyor, rear discharge - High-pressure cooling system (800/1,100 W) 5bar - Line filter for coolant - Mechanical interface for oil mist separator 150mm - Without in-machine tool presetter This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Machine Type: CNC Turning Center Model No.: CLX450V4 Manufacturer: DMGMORI Control: SLIMline® Multi-Touch Contr./Fanuc Year of manufacture: 2023 #001354 TECHNICAL DATA: Turning diameter max. approx. 400 mm Turning diameter standard approx. 310 mm Chuck size approx. 260 mm Turning length approx. 755 mm Rod diameter max. spindle/chuck approx. 80/78 mm Turret stations approx. 12 X-axis approx. 276 mm Z-axis approx. 830 mm Y-axis approx. 120(+-60) mm Tailstock approx. 800 mm Spindle speed approx. 4000 rpm Speed AGW max. approx. 4000 rpm Rapid traverse X/Z approx. 30/30 m/min Rapid traverse Y approx. 22.5 m/min Footprint L x W x H approx. 4.30x2.45x2.30 m (with chip conveyor) Machine weight approx. 6,250 kg Main spindle A2-8" 17 / 25.5 kW (100/40% ED), 4,000 rpm - 3-jaw chuck - Differential Compressive Stress for the Main spindle - Foot control ped ...

Used machine CNC turning center Machine type: DMG CTX beta 800 V6 Control: Celos with Siemens Year of Make: 2022 #001380 TECHNICAL DATA: Max. turning length: [mm] 800 Turning diameter: [mm] 410 Max. Turning Ø over bed: [mm] 700 Main spindle Speed range: [1/min.] 4,000 Drive power: [kW] 34 / 25 Bar Passage: [mm] 95 C-axis Sub-spindle Speed range: [1/min.] 6,000 Drive power: [kW] 26 / 22 Bar Passage: [mm] 52 Tailstock function Travels: X-axis: [mm] 300 Y-axis: [+/- mm] 60 Z-axis: [mm] 800 Number of turrets: 1 Tool holder: VDI 40 Tool Locations: 12 Powered Tools 12 Features: Chip conveyor Automatic door High-pressure coolant system Oil mist extraction Standard Profibus for Robo2Go Package Bar Machining BOSS 338/32-HD bar feeder, manufacturer IEMCA This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Machine Type: CNC Machining Center Vertical Model No.: CMX1100V Manufacturer: DMGMORI Control:DMG MORI SLIMline® Multi-Touch Heidenhain Year of Make: 2022 #001358 Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for tightening bolts DIN 69872 - Direct position measuring system X-Y-Z - Magazine with 30 tool positions - Coolant supply through spindle (IS) bar 20 - Double switching filter - Coolant-blown air switching externally via M-function - Chip conveyor (scraper belt, left side) - Tank capacity left side chip conveyor 250 - Coolant spray gun for chip removal - Automatic cab roof - Signal light - Electronic handwheel - Button kit spindle and table Traversing range X-axis 1100 mm Y-axis 560 mm Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Footprint L x ...

Used machine Machine Type: CNC Machining Center Vertical Model: NVX5100 2nd with Matris robot cell Manufacturer: DMGMORI Control:DMG MORI Celos Year of construction / Ib: 2019 / 2022 #001312 Technical data Travel range X-axis approx. 1050 mm Y-axis approx. 530 mm Z-axis approx. 510 mm Table size approx. 1,350x600 mm Workpiece weight max. approx. 1,200 kg Speed max. approx. 12,000 rpm Spindle motor approx. 37/22 KW Number of tool positions approx. 30 Rapid traverse approx. 30 m/min Mounting cone approx. BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 45 kVA Footprint L x W x H approx. 3.1 x 2.85 x 2.6 m (without chip conveyor, without robot) Machine weight approx. 7,300 kg Main Drive with Higher Torque - Tool Holder Cone for BT-40 Tool Holder - Tool magazine with 30 places (#40) - Door for tool magazine - Hinged belt conveyor  ...

Used machine Machine type: CNC turning and milling center Model: CTXalpha 500 V6 Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2022 #001272 Technical data Turning diameter max. approx. 240mm Turning diameter standard approx. 200mm Chuck size approx. 210mm Turning length approx. 480mm Rod diameter max. approx. 52/option65mm Turret Stations 12 X-axis approx. 210mm Z-axis approx. 525mm Spindle speed 1/2 approx. 5000/6000 rpm Speed AGW max. approx. 5000U/ Rapid traverse X/Z/Y 30/30/22.5 • Main spindle 5000 Ulmin • Hydraulic 3-jaw chuck 210 mm • Sub-spindle 6000 Ulmin • Hydraulic 3-jaw chuck 170mm • 12 station turret VDI 30 Trifix • Tool drive for all stations • C-axis • Y-axis • Alternating speed • Coolant supply through the sub-spindle • Swivelling tool presetter • Coolant spray gun, 5bar • CTXalpha  ...

Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32/8 Manufacturer: DMGMORI Control: Fanuc 32i First commissioning: 2019 #001328 Location: Germany T-main and sub-spindle - Y-axis on carriage 1 - Y-axis on carriage 2 - C-axis on main spindle - C-axis on sub-spindle - Tank for chips included Coolant Pump - Workpiece unloading belt - Flushing for counter-spindle pliers - Hinge belt chip conveyor - Signal lamp 4-colour - IEMCA Boss 338/32HD bar feeder This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Universal Machining Center Machine type: DMG DMF 360 / 11 linear Control: Heidenhain TNC 640 Celos Year of Make: 2017 TECHNICAL DATA: Travels: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Dynamic Pack for DMF 360 linear (Y1100) Rapid traverse: (X/Y/Z) [m/min.] 80 / 60 / 60 Speed range: [1/min.] 20 - 15,000 Drive power: [kW] 46 / 30 Tool holder: SK 40 Tool Changer Tool positions: 60 NC rotary table Table size: [mm] 3,200 x 1,100 Max. table load: [kg] 1,200 Features: Internal cooling (IKZ): [bar] 40 Coolant tank: [l] 600 Chip conveyor Chip rinsing gun Oil mist extraction Air through spindle center Probe Spindle Preparation for use 3D quickSet Automatic doors Electronic handwheel This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine CNC machining center horizontal Manufacturer:DMGMORI Type:NH4000DCG Year of construction:2021 Control Type:FANUC F31iB Origin: Japan Location:Germany Delivery Time Technical data Traversing range X-axis approx. 560mm Y-axis approx. 560mm Z-axis approx. 630mm Table 360° 1° Workpiece diameter approx. 630mm Workpiece weight max. approx. 400kg Speed max. approx. 14,000 rpm Spindle motor approx. 18.5/11KW Number of tool positions approx. 40 Rapid traverse approx. 50m/min Mounting Taper BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 34kVA Footprint L x W x H approx. 2,360×3,914x2,711m Machine weight approx. 9,600 kg Automatic Rotary APC Tool Holder: BT40-Max. Spindle speed 14,000 min-1,-18.5/11 kW (10min/100% ED)-Number of Tools: 40 (Chain Type)-Table Indexing 1° Scraper Belt Conveyor with drum filter preparati ...

Used machine DMGMORI NHX6300 Machine type: CNC machining center horizontal Model No.: NHX6300 Manufacturer: DMGMORI Control: CELOS MAPPS Year of Make: 2021 Location: Germany #001396 TECHNICAL DATA: Travels: X-axis: [mm] 1050 Y-axis: [mm] 900 Z-axis: [mm] 1030 B-axis 0.001° Rapid traverse: (X/Y/Z) [m/min.] 60 Speed range: [1/min.] 12,000 Drive power: [kW] 55/30 Tool holder: HSK100 Tool Changer Tool Positions: 120 Pallet system Number of pallets: 2 Pallet size: [mm] 630 x 630 Machine weight: [kg] 18,700 Facilities Control F31iB with CELOS spindle cone HSK-A100 preparation for coolant system by the spindle rotary table with full-fledged 4th axis 120-fold tool magazine (HSK-A100)- Coolant Washer Nozzles for Mist Separator INTERLIT TMF300/980 Setup Station Connection Compact filter system 70 bar-INTERLIT coolant cooler 15 kW in-machine measuring system (spindle ...

Used machine DMU40eVo with EROWA Magazine Machine type: CNC machining center 5-axis vertical Model: DMU40eVo with EROWA Manufacturer: DMGMORI Control: CELOS Heidenhain TNC640 Year of Make: 2019 Location: Germany #001371 Options: -Motor spindle speedMASTER® HSK-A63 -Spindle speed 20-20,000 min-1 -NC swivel rotary table -Tool magazine 210 places -Scraper chip conveyor -Internal coolant supply (IKZ) paper belt filter 20-80bar -Advanced chip flushing -Blowing air through the center of the spindle -Rotating lens -Oil and emulsion mist separator mechanical - Infrared touch probe -Tool breakage detection TRS2 -Preparation 3D quickSET -Signal light, four-color -DMG MORI automation interface -Pneumatic control of the PowerChuck 210 zero-point clamping system -EROWA Robot Compact (ERC80) -Magazine:15x rack level PC210 with 3 pos. each = total 45 pos. Changes, Thi ...

Used machine Machine type: CNC turning and milling center Model No.: CTXgamma1250TC4a Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2020 #001348 Location: Germany Technical data - Main spindle as integrated spindle motor, ISM102 - Sub-spindle as integrated spindle motor, ISM 76 - tailstock function for the sub-spindle - C-axis and spindle brake (hydr.) - Chuck rinsing device of the main spindle, external - Absolute, direct displacement measuring systems X-'Y-'Z1-axis - Differential stress main spindle - 36-cavity tool disc magazine - Hinge belt chip conveyor - Coolant system 8/20/80 bar - Coolant supply through the sub-spindle - Coolant spray gun - Mechanical oil mist separator - Automatic work area door - Workpiece probes - Tool turret at the bottom This offer is subject to change and non-binding. Changes, errors and prior  ...

Used machine CNC turning-milling center Machine type: DMG MORI CLX450TC Control:DMG MORI SLIMline® Siemens Operate Year of Make: 2022 Location: Germany #0011281 Technical data Turning diameter max. spindle 1+2 approx. 400 mm Turning diameter standard spindle 1+2 approx. 250 mm Rod diameter max. spindle 1 approx. 65 mm X-axis approx. 750 mm Z-axis approx. 1,100 mm Y-axis approx. +-100 mm A-axis (spindle 2) approx. 1,200 mm B-axis approx. 240° (+-120°) mm Spindle speed 1+2 approx. 5,000 rpm Speed milling pindle approx. 12,000 rpm Rapid traverse X/Y/Z approx. 40 m/min Rapid traverse A spindle 2 approx. 40 m/min Rapid traverse B axis approx. 70 m/min Power spindle 1+2 max. approx. 17 (40%) kW Power milling spindle max. approx. 10.5 (40%) kW Facilities Main Drive Spindle 1/2 17KW 40% - 5000rpm - Turning-Milling Spindle HSK63 10,5KW 40% - 12,000rpm - tool magazi ...

Used machine Machine Type: CNC Turning Center Model: CLX 750 V3 Manufacturer: DMGMORI Control: SLIMllne® Multi-Touch Control Siemens Year of Make: 2021 Location: Germany #001273 Turning diameter max. approx. 700 mm Turning diameter standard approx. 610 mm Chuck size approx. 400 mm Turning length approx. 1,300mm Rod diameter max. approx. 127 mm Turret stations approx. 12 X-axis approx. 435 mm Z-axis approx. 1,300 mm Tailstock approx. 1,200 mm Spindle speed max. approx. 2,000 rpm Speed AGW max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Compressed air bar,L/min approx. 5, 100 bar,L/min Machine weight approx. 10,200 kg Facilities - Main spindle A2-11" with AC motor, 36/46 kW (100/40%), 2,000 min-¹ - 3-jaw chuck 300mm - Partial hollow clamping device for the main spindle 127mm - Chuck flush for the main spindle - 12-fold servo tool turret mount VDI ...

Description Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2022 #001283 Location: Germany TECHNICAL DATA: Technical data Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Facilities Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - SK40 - Coolant tank - IKZ pump 20bar - Filter for coolant - Bed flushing via M-function switchable - coolant spray gun - spindle blowing air switchable via M-funct ...

Used machine Machine Type: CNC Turning Center Model No.: NLX3000Y/3000 Manufacturer: DMGMORI Control: Celos Year of Make: 2020 #001355 Turning diameter max. approx. 420 mm Turning diameter standard approx. 310 mm Chuck size approx. 300 mm Turning length approx. 3,123 mm Rod diameter max. approx. 90 mm Turret stations approx. 12 X-axis approx. 280 mm Z-axis approx. 3,170 mm Y-axis approx. 120 (±60) mm Tailstock approx. 3,164 mm Spindle speed max. approx. 3,000 rpm Speed AGW max. approx. 6,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Rapid traverse C approx. 300 rpm Power consumption approx. 54 kVA Compressed air bar,L/min approx. 5, 100 bar,L/min Footprint L x W x H approx. 8.30 x 3.50 x 2.41 m (without chip conveyor) Machine weight approx. 14,200 kg Main spindle 22/18,5KW • 3jaw chuck set • rpm 3000 • 12 station turre ...

DMG MORI DMC 635 V Ecoline CNC machining center was built in 2014 in Poland by FAMOT Pleszew Sp. z o.o. The machine, designed for precision machining of workpieces, is the perfect solution for both unit and series production. The machining process is performed fully automatically by means of a reliable electro-spindle and tools taken from a 20-position magazine. Process stability, in turn, is ensured by an extremely rigid bed, which continuously eliminates any vibration and oscillation. All this is complemented by an easy-to-use HEIDENHAIN CNC control with many useful functions. The DMG MORI DMC 635V Ecoline CNC vertical machining center weighs 3900 kg. Technical specifications of the DMG MORI DMC 635 V Ecoline CNC milling machine - HEIDENHAIN TNC 620 CNC control with workpiece and machining 3D simulation - feed in the X/Y/Z axis: 635/510/460 mm - rapid traverse in the X,Y,Z axis:  ...

Key data: 254 mm, 700 mm

Turning milling center Manufacturer: DMG Mori Type NLX 2500/700 Control M730UM Mitsubishi with Celos Turning length 700mm 12 tool stations, all 12 of which are driven Y-axis Bar passage 91mm Program runtime Head1 4036h Cumulative cutting time Head 1 2058h Machine running time 8605h Bar loading magazine TOP Automazioni 3m Incl. tool package NP 64.000 euro Machine is in TOP condition

CNC lathe DMG MORI ecoTurn 450 With Siemens 840 D SLIMline controller Year of Make: 2016 Max. rotatable diameter: 315 mm Wheelbase: 685 mm Travel X : 224 mm Travel Z : 600 mm Spindle bore: 91 mm Max. spindle speed: 4000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations C axis , Y axis +/- 50 mm 5 pcs of VDI 40 powered tools 60 VDI 40 tool holders Hydraulic Collet Chuck HAINBUCH with Foot Switch Tool measuring device in the work area Workpiece pick-up device Tailstock with quill Signal light 4 colour Chip conveyor Rinsing gun Coolant device with reinforced pump 20 bar Operating Instructions

Key data: 560 mm, 560 mm, 660 mm

Horizontal BAZ DMG MORI NHX-4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar - 900 litre tank - paper belt filter Chip conveyor Preparation Renishaw 3D - Probe

Horizontal BAZ DMG MORI NHX-4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar - 900 litre tank - paper belt filter Chip conveyor Preparation Renishaw 3D - Probe