288 DMG MORI used machine for sale

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mRapid feed X / Y / Z36/36/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis; Control: DMG MORI Slimline Multi-Touch Working areaSwing diameter over guide ways650 mmSwing diameter over transverse guideway465 mmTurning diameter315 mmBar diameter max.80 mmSlide 1Longitudinal stroke600 mmTransverse stroke267 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y10 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)370 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,18 x 2,66 x 1,94) mWeight approx.5800 KgPre-setting PackagePre-setting Package: - tool ...

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machineDMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnosticsIoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details.

This 5-axis DMG MORI HSC 20 was manufactured in 2019. It features a maximum spindle speed of 42,000 rpm and a clamping surface of 450 × 400 mm. The integrated tilting rotary table allows for a tilt range of -15° to +130°, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 20 vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG MORI HSC 70 linear was manufactured in 2014. It features impressive travel dimensions of 650 mm in X, 600 mm in Y, and 380 mm in Z. The machine is equipped with a spindle speed of up to 18,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 70 linear universal machining centre we have for sale. Contact us for further details.

x-travel: 600 mm y-travel: 500 mm z-travel: 500 mm total power requirement: --- kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details.

This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details.

GeneralUniversal Turning Machine with cycle control and RMS-Sensor; Control: MANUAL PLUS Main drive 1Type of main driveAC Drive power (100% DC)12 kWSpeed range10 - 3000 rpmNumber of Gearsteps2 Max. torque (40% DC)920 NmWorking areaSwing diameter over guide ways500 mmSwing diameter over transverse guideway285 mmCentre height1000 mmTransverse stroke260 mmWork spindle (left)Spindle noseacc. To DIN 55027 Diametre of spindle nose8 Spindle bore70 mmSpindle diametre on front bearing120 mmSlide 1Rapid traverse in X8 m/minRapid traverse in Z10 m/minFeed rate in X5000 mm/minFeed rate in Z5000 mm/minFeed rate torque (100% DC) in X500 daNFeed rate torque (100% DC) in Z1000 daNFloor space/WeightDimensions (L x W x H)3,1 x 1,95 x 1,83 mWeight approx.2900 KgMiscellaneousColour Disk turret, Sauter, DIN 69880-30 mmDisk turret, 8 stations for fix tools, make Sauter, tool reception DIN 69880-30 mm mounted  ...

GeneralUniversal machining centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical15000/15000/15000 mm/minRapid traverse longitudinal/transverse/vertical60/40/40 m/minWorking area 1Longitudinal1800 mmCross2000 mmVertical1100 mmMiscellaneousClamping SystemHSK-A 100 Tool changerType of magazineChain Tool changer planevertical Prod. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring system4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 10 rpmNumber of Slots 9Slot width 22 mmMaximum load (table centre) 3500 KgCentre bore 1 ...

GeneralUniversal machining centre; Control: 3D control Heidenhain iTNC 530 Working area 1Longitudinal500 mmCross420 mmVertical380 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 -18000 rpmSpindle taperHSK-A 63 Pick-up toolchangerPick-up tool changerNumber of tools 32NC rotary table w. swivel axisNC rotary table with swivel axisRotary air leadthroughRotary air leadthrough for NC rotary table with swivel axis 2x G1/8 interfaceRotation Speed 5. Axis 26 rpm5. Axes (swivelling range) 0 - 180 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 33 rpmDistance between T-Slots 63 mmNumber of Slots 5Slot width 14 mmMaximum load (table centre) 200 KgCentre bore 30H7 mmTable surface 500 x 380 mmType of Measuring system Direct measuring systemSpecial equipmentSealing air in swivel rotary table

This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information.

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min,; Control: CELOS X with Siemens 840D SL Operate Main drive 1Drive power (100% DC)33 kWDrive power (40% DC)40 kWSpeed range- 4000 rpmTorque (100% DC)580 NmMax. torque (40% DC)700 NmC-Axis Speed-4000 rpmTorque of C-Axis (holding torque)1100 NmAccuracy at point stopping0,001 degreeWorking areaSwing diameter over guide ways700 mmTurning diameter630 mmClamping chuck diameter max.400 mmDistance between spindles2260 mmBar diameter max.102 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69 ...

turning diameter: 500 mm turning length: 1200 mm control: Siemens 840D greates pass round over bed: 700 mm Main spindle:: turning speed range - main spindle: 20 - 5000 min/-1 power capacity - main spindel: 25 /34 kW max. Torque: Nm C-Axis: 0,0001 ° spindle diameter: 67 mm milling spindle: milling spindle motor: 13 / 22 milling head speed: 12000 U/min b-axis: +/- 110 ° axis stroke:: x-axis: 450 mm y-axis: +/- 100 mm z-axis: 1300 mm feeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/min feed power: 5,6 / 5,6 / 7,4 kN turret:: number of toolpositions: 24 pos. tool taper: Capto max. chucking diameter: 250 mm tail stock: tailstock quill taper MT: 5 tailstock adjustment: 1200 mm total power requirement: 65 kVA weight of the machine ca.: 8 t dimensions of the machine ca.: 6 x 2,7 x 2,1 m CNC - Turning and milling centre - 5 axes simultaneous - CNC control Siemens 840D SolutionLine w ...

x-travel: 1250 mm y-travel: 1000 mm z-travel: 1000 mm spindle taper: HSK-A 100 turning speed range: 10.000 U/min spindle drive: 28 kW Torque: 1240 Nm feed range: 0 - 12.000 mm/min rapid traverse: 60 m/min table surface area: 800 x 1000 mm workpiece weight: 1500 kg Control: Siemens 840D total power requirement: 80 kW weight of the machine ca.: 21 t dimensions of the machine ca.: 5,9 x 6,5 x 3,5 m 5-axis simultaneous machine equipped with: - CNC control Siemens 840D - 6-fold pallet station - Tool changer (HSK 100) - Coolant system with IKZ 40/80bar - Probe - tool breakage control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralUniversal Milling / Turning Machining Centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools63 Floor space/WeightWeight approx.18500 KgUniv. milling head w. controlled B-axis HSK-A 100Universal milling head with controlled B-axis HSK-A 100 (only with motor spindle HSK-A 100)NC milling/turning tableNC mill-turn table 1 x T-slot as cross slot 12 x T-slots as starslots / 22,5 ° with integrated balancing sensorCoolant supply ICSCoolant through spindle centre form AD, 40 bar/23 l/min Multi-jet unit at milling head, switchable from coolant ...

A vertical high-performance milling and thread machining center DMG Mori is available. Travel X/Y/Z: 700mm/420mm/380mm, max. workpiece dimensions X/Y: 880mm/550mm, table dimensions X/Y: 840mm/420mm, max. table load: 400kg, spindle speed: 10000rpm, spindle power: 25kW, torque: 45Nm, tool positions: 15, tool holder: BT30, rapid traverse: 60m/min, feed force: 5kN. Machine dimensions X/Y/Z: approx. 1650mm/2350mm/2500mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D Solutionline, machine hours: 28892h, spindle hours: 12674h. Documentation available. An on-site inspection is possible.

This DMG DMU 40 evo Vertical Machining centre was made in 2012 in Germany and has 22398 production hours. It is equipped with a HEIDENHAIN 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. It doesnt have internal cooling but has 30 tools in magazine.

Horizontal turning machine manufactured in 2021. This DMG MORI CLX 550 features a maximum turning diameter of 480 mm and a turning length of 1,240 mm. It is equipped with a 12-position turret and a maximum spindle speed of 3,250 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 machine we have for sale. Contact us for further details regarding this machine.

This 6-axis DMG MORI Beta 1250 TC was manufactured in 2014. It features a maximum workpiece length of 1,200 mm and a bar capacity diameter of 102 mm. The machine includes a swivel range of the B-axis of ± 110° for enhanced flexibility and a tool magazine that accommodates up to 24 tools. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI Beta 1250 TC turn-mill centre we have for sale. Contact us for further details.

CNC vertical machining center Type: ecoMill 600 V Manufacturer: DMG MORI Year: 2016 Control: Siemens SLIMline X: 600 mm Y: 560 mm Z: 510 mm Max spindle speed: 12000 rpm Table: 900 x 560 mm Max table load: 600 kg Tool magazine: 30 positions Machine weight: 5000 kg Tool and work probe Filtration Bürener Preparation for mist extraction Chip conveyor New spindle in 2025 Machine in good condition, fully functional, under power Find more here - / Contact us at -

This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine.

This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, its ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine.

This 3s DMG MORI DMC 1035 V ecoline was manufactured in 2012. It features travels of 1035 mm in the X-axis, 560 mm in the Y-axis, and 510 mm in the Z-axis, with a spindle speed range of 12,000 rpm. The machine includes a 20-station tool magazine and an internal coolant supply. Consider the opportunity to buy this DMG MORI DMC 1035 V ecoline vertical machining centre. Contact us for further details.

This 3s DMG MORI 635V vertical machining centre was manufactured in 2013. It features travels of 635 mm in the X-axis, 510 mm in the Y-axis, and 460 mm in the Z-axis, with a rapid traverse of 30 m/min. The spindle speed ranges from 20 to 12,000 rpm, and it includes a 20-station tool changer. Consider the opportunity to buy this DMG MORI 635V vertical machining centre. Contact us for further details.

This 3-axis DMG MORI CMX 1100 V was manufactured in 2017. It features impressive axis travels of 1100 mm in X, 560 mm in Y, and 510 mm in Z. The machine is equipped with a 30-position tool magazine and a HEIDENHAIN TNC 620 control system. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details.

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mMovement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)600 KgWeight approx.5300 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Optio ...