Fabricante:
(Categoría: 106)
Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm
Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR
High Speed Precision Press Maker Obata (Japan) Year of manufacturing - 1981 Capacity 10 t Stroke length 22 mm Speed 100-400 stroke/min price 6000 EUR ... más información
Used Feintool HFA 4000 equipped with Feeder Line Saronni total force 2500-4000 kN blank holder force 200-2000 kN back pressure force 100-1000 kN shearing force 1000-3700 kN safety distance 14 mm FEEDER LINE brand SARONNI year 2006 - completely overhauled in 2012 ... más información
Technical data Feintool MFA 1600 equipped with feeder line Total force incl. auxiliary function: kN 1600 Hydraulic counterweight (upper table): kN 20….950 Hydraulic counterweight (lower table): kN 20….850 Ejector force (pump pressure) : kN 210 Power of drive motor : KW 22 Power of hydraulic unit: KW 22 Required compressed air pressure: bar 4…6 Number of strokes of the ram: 1/min 25….100 Maximum material thickness: position 15 mm 6 (8) | position 5 mm 8 (10) Scrap chopper : kN 150 Stroke of the ram: position 15 mm 60 | position 5 mm 62 Air consumption: m3/h 80 Mass: Kg. 11000
Press Manufacturer: Lauffer + Butscher Type: OPS 60/W Year of Make: 1969 Pressure: 60 tons. Stroke: 150 mm Plunger stroke: 150 mm Installation height: 400 mm Passage between the columns: 430 mm Table size: 430 x 250 mm Pusher speeds: Countersinks: 2,300 mm/min. Presses: 240 mm/min. Retraction: 5,000 mm/min. Max. pressure: 60 Mp Retraction force max.: 31.5 Mp Operating pressure max.: 298 atm Pump type: FRENHV 37/4.2 with two-stage valve Motor: Three-phase flange design 220/380 , 50 Hz, P33, 2.2 kW
Eccentric Press Manufacturer: Edelhoff Type: EP3A Year of Make: 1971 Pressing force: 35 tons. Stroke: 5 – 75 mm Plunger adjustment: 50 mm Plunger strokes: 110/min. ... más información
Qty. 1 Second-hand extrusion press line Mfc.: SMS Schloeman, Junker, Allen Bradley Type: Direct press Built: 1987 Force: 2800 MT Billet dia.: 228 mm – 9” Length: 250-1000 mm Consist of: Logs Loading Table Logs Furnace Hot Shear Induction Heater Extrusion Press Pullers (2) Quenching Unit Hot Saw Run-out Table Stretcher Finishing Saw Aging Oven
Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts hea ...
Working width 2000 mm, depth stop approx. 500 mm, YOC 84 Control ... más información
Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 - 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation in German.
Used Hydropneumatic Press / Assembly Press / Printing Joining Press - Pressing force 10 KN (1 to) - Used hydropneumatic cylinder make TOX - Pneumatic two-hand control - Portal frame aluminum profile 90 90 mm - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 50 kg Suitable as an assembly press for insezing components. With x- and y-adjustment alignable vice for die diameters up to 80 mm. Or for small punching or embossing tools. All tools or vices are quickly changed through the groove system.
Pneumatic press 2643 Assembly through pivot table outside the working area With protective cage and release only with a retracted swing table Table size: 10 cm x 10 cm ... más información
Hand lever press to push pins in printed circuit boards ... más información
The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...