máquinas talladoras de engranaje usadas para la venta

 ... más información

total power requirement:413 kWInduction hardening machine Rotary table Eldec: Z (servo drive 750 mm Y (electromechanical) 300 mmX (electromechanical) 200 mmMaximum part diameter 600 mmMaximum workpiece weight 500 kg High frequency generator type HFG 200 Medium frequency generator type MFG 30  ... más información

max. wheel diameter:280 mmmax. module:7 weight of the machine ca.:13 ttable turning speeds:100 U/mintable diameter:250 mmmin. number of teeth:4 hob turning speeds:1500 U/minmax. hob diameter:160 cutter length max.:230 mmMachine in good condition.Available 01.08.2024 ... más información

max. wheel diameter:200 mmgear width:60 mmmax. module:7 weight of the machine ca.:15 ttable diameter:180 mmtable turning speeds:100 U/minhob turning speeds:750 U/minMachine in good condition, without feed, without automationAvailable 24.08.2024 ... más información

max. workpiece diameter:470 mmworkpiece diameter:470 mmmax. distance spindle nose and rollerhead carrier:2150 mmmin. dist.spindle nose / chuck:1950 mmmax. length of teeth cutting:400 mmrollerhead dia. max.:115 mmno. of teeth (continued procedure):12 - 96 no. of tooth single indexing:12-96 feeds -stepless-:40 - 240 mm/minrapid traverse:1800 mm/mintotal power requirement:18,5 kWweight of machine approx.:10000 kgdimensions with soundproof cabinet:4000 x 2250 x 2000 mmCold Rolling Machine GROB ZRM 95 M in good condition, has been used to machine the gearing of the Cardan Shaft by OEM Quality Standard.The Bed of the machine is not Standard size, it has been delivered to the needs of the first owner MAN - for Truck Cardan Shafts.

max. wheel diameter:600 mmmax. module:10 min. module:2 total power requirement:1,4 kWweight of the machine ca.:0,68 tdimensions of the machine ca.:1,6x0,75 mdiameter of hob:15 mmgear width:140 mm ... más información

max. wheel diameter:215 mmgear width:40.65 mmLargest Speed Ratio:1:10 x-axis:(horizontal) -152 to 102 mmy-axis:(vertical) -102 to 178 mmz-axis:Sliding Base Travel 2" to 12" (51 to 304mm) mmb-axis:3 - 90 °max. distance machine center to spindle slide:115 mmmax. nos. of teeth:5 - 200 ( inclusive ) St.workpiece external diameter max.:215 mmtooth profile - width x height:16 x 40,65 mmgrinding wheel diameter:51 -190 mmgrinding wheel turining speeds:1000 - 6000 1/minworkpiece turning speeds:0 - 30 1/minworkpiece spindle bore:konisch 3-29/32 "speed of axis:125 mm/sec.total power requirement:20 kW - 380 V - 50Hz kwweight of the machine ca.:10000 kos.dimensions of the machine ca.:4750 x 3400 x 2540 mmModel 200HG GLEASON Phoenix CNC Hypoid Spiral Bevel Gear Grinding Machine, Serial No. 914904, New 1996. Suitable for the hard finishing of spiral bevel, zerol bevel,and hypoid gears and pinion ...

max. wheel diameter:5 - 260 mmgear width:400 mmmax. module:15 min. module:0,5 gear hobbing diameter - internal:30 mmmax. helix angle:> 85 ° Aussenverz.max. helix angle:> 45° Innenverz.Testing Range vertical:400 mmdist. between centers:5 - 600 mmtable diameter:260 mmmax. table load:100 kgspeeds:30 1/mintotal power requirement:1,6 kVAweight of the machine ca.:900 kgdimensions of the machine ca.:200 x 1300 x 2150 mmCNC Gear Tester in good condition, out of OEM Test Lab.For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)

max. wheel diameter:300 mmgear width:100 mmmax. module:5 workpiece turning speeds:0 - 1000 1/minwork piece - max.:1100 mmworkpiece clamping:auto. tension device number of spindle speeds:1000 1/min.spindle bearing diameter:100 mmdiameter of spindle flange:120 mmtailstock travel:80 mmweight of the machine ca.:3500 KGdimensions:1200 x 1450 x 2250 mmtotal power requirement:10 kVAThe Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

max. wheel diameter:130 mmmax. module:3 total power requirement:15 kWweight of the machine ca.:6 tdimensions of the machine ca.:2,3 x 2,5 x 2,17 mA well-preserved CNC hobbing machine Vertical for shafts and wheelsWith tailstockAlso suitable for hard milling (good for steering pinion)Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range 0,1 - 2000 mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm 2500 mm 2170mmAccessories :Hydraulical workpiece clampingAutomatic ...

max. wheel diameter:180 mmmax. module:5 min. module:1 weight of the machine ca.:14 tdimensions of the machine ca.:4,5 x 2,84 x 2,8 mmin. number of teeth:7 toolpiece turning speed range:4000-10000 U/mintool length:210 mmWith tail stockNo dressing deviceOnly CBN ... más información

max. wheel diameter:180 mmgear width: mmmax. module:4 total power requirement:14 kWweight of the machine ca.:8 tslide travel axial ( Z-axis ):300 mmwork piece - max.:490-640 mm ... más información

max. wheel diameter:275 mmgear width:58 mmmax. module:8 min. module:0,5 weight of the machine ca.:10 tmax. number of teeth:200 min. number of teeth:5  ... más información

pulling force - max.:2,5 tmax. ram stroke:1000 mmmax. workpiece diameter:40 mmBroaching speed:60 m/min.return speed:20 m/min.total power requirement:24 kWweight of the machine ca.:6 tdimensions of the machine ca.:1,7 x 2,4 x 4,77 mclamping plate:320 mm ... más información

max. wheel diameter:40-160 mmgear width:90 mmmax. module:3,5 min. module:1,25 weight of the machine ca.:5,6 tFor detailed technical data, see PDF File Page 15-16 ... más información

rolling capacity max.:2-20 tworkpiece diameter:100 mmtotal power requirement:2 x 8,5 kWweight of the machine ca.:11 tdimensions of the machine ca.:7,1 x 5,15 x 3,9 mDescription of the manufacturer:The ROLLEX® is more than an innovation offered by Profiroll in the field of Spline Rolling. This flexible machine type enables a rolling of splines onto most different types of shafts. The CNC-control combined with symmetric circular dies allow a manufacturing of splines with highest quality demands. Likewise the ROLLEX® is able to coldform profiles, threads and to perform finishing rolling due to its reliable Profile Rolling process.Circular Die Process circular dies for kinematic rolling with symmetric geometry this correlates to a rolling rack of infinite length a workpiece specific calibration phase achieving least tolerances is the result lowest changeover times due to compa ...

max. wheel diameter:80 mmmax. module:3 total power requirement:25-35 kWweight of the machine ca.:10 tworkpiece weight:15 kgworkpiece length - max.:-50+450 mmtable diameter:145 mmdiameter of hob:90 mmcutter length max.:220 mmhob turning speeds:1.000 U/min ... más información

rolling capacity max.:6,1 tworkpiece diameter:160 mmworkpiece length:25 mmtotal power requirement:14 kWweight of the machine ca.:4000 kgsdimensions of the machine ca.:2,5 x 2,5 x 2,1 mInternal rolling machine for transmission shift sleeves ... más información

max. wheel diameter:300 mmgear width:100 mmmax. module:5 workpiece turning speeds:0 - 1000 1/minwork piece - max.:1100 mmworkpiece clamping:auto. tension device number of spindle speeds:1000 1/min.spindle bearing diameter:100 mmdiameter of spindle flange:120 mmtailstock travel:80 mmweight of the machine ca.:3500 KGdimensions:1200 x 1450 x 2250 mmtotal power requirement:10 kVAThe Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

max. wheel diameter:200 mmgear width:250 mmmax. module:3 min. module:0,5 total power requirement:45 kWweight of the machine ca.:8,5 tdimensions of the machine ca.:4,4 x 2,4 x 2,7 mMachine out of prototype productionWithout automation ... más información