- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- ABS Trading (2)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AHRENS + BODE (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (12)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- Allround (3)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (3)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- ARCUS (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- BALLERSTAEDT (1)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMASCH (1)
- BAUMER (3)
- Bavelloni (2)
- ... mais
Fabricante:
(Categoria: 1300)
usava
Mixing installation on steel construction with pan mixer (150 l. net capacity, 5,5 kW drive, 0,55 kW outlet), skip hoist (1,5 kW drive, incl. winch, rope and rails) and switchgear cabinet. In very good condition, hardly used after full refurbishment. ... mais informação
Ano de construção: 2002
usava
Cleaning and glazing cabin in Nirosta version, with KSB water pump 2.2 kW, exhaust fan 3.0 kW (incl. exhaust pipe 600 mm ), lighting, rotary table and control cabinet. Completely dismantled ready for transport. ... mais informação
usava
Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel. ... mais informação
usava
Vibration sieves with exchangeable screen lining, screening surface: 450 mm x 300 mm, vibrator: 0,3 kW / 2.750 RPM, cast case with oval inlet. Prior use: Ceramic slurry screen (wet screening process). Several identical sieves available. ... mais informação
Ano de construção: 2002
usava
Glazing and cleaning booth in stainless steel, with KSB water pump 2,2 kW, suction fan 3.0 kW (incl. Exhaust tube 600 mm Ø), lighting, turntable and switchgear cabinet. Dismantled, ready for transport. ... mais informação
usava
Steel box feeder with steel belt and combined drive unit for belt and windlass. Box dimensions: Ca. 2.000 mm x 750 mm x 500 mm high; incl. hopper on top with the following inlet dimensions: 1.600 mm x 1.200 mm x 360 mm high. Condition: Solid body; motor must be revised, part of belt needs to be greased / made flexible (due to standing time)
usava
Extrusion press with 400 mm Ø, 55 kW drive, hard cast screw and pre press PZSVG 40 (built 1996, 15 drive), on 4 hydraulical posts. Complete, incl. 1 set spare parts (replacement screw and windlass). ... mais informação
usava
Pressureless dust dilters für mounting on top of silos, material bunkers etc. in mild steel design. Equipped with 20 pcs. textile filter tubes (each 200 mm Ø x 2.000 mm long), incl. elektrical vibration device for cleaning. Filtering surface: Ca. 25 m². In very good condition, several filters available (identical).
usava
Inclined lift with motorized winch (7.5 kW / 36 UPM), lifting bucket (1,000 l. usable volume), weighing frame / foot station (2,000 kg max.), 25 m rope and head station for material transfer. Rope and SEW winch drive are new; Elevator was used to feed an Eirich intensive mixer type R(V) 18. Technical documentation is available.
usava
Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included). ... mais informação
usava
Robust rotary valve with inlet and outlet diameter 275 mm, drive via gear motor 0.25 kW / 35 UPM. Several identical locks available (Built between 2000 and 2007), very good condition, partly unused. ... mais informação
usava
Inclined hoist system with electrically operated winch (7,5 kW / 36 RPM), bucket (1.000 l. net capacity), weighing frame / ground station (2.000 kg max.), 25 m rope and discharging station. Rope and SEW winch drive are new / unused. Hoist has been used with Eirich intensive mixer R(V) 18. Technical documentation is available.
usava
Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm. ... mais informação
usava
Pipe conveyor screw with 270 mm diameter and 5,000 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm. ... mais informação
usava
Pipe conveyor screw with 270 mm diameter and 2,900 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm. ... mais informação
usava
Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling. ... mais informação
Ano de construção: 1991
usava
Electro-mechanical scale for liquids, with Hottinger load cell, pressure control valve, pneumatic outlet valve and solenoid valve. In support frame with feet. ... mais informação
Ano de construção: 1995
usava
Totalent emptyer with hydraulically operated floor flaps over the entire length, drive 37 kW via Flender gearbox, incl. hydraulic unit with 4 kW for actuating the floor flaps and pneumatic flaps for filling from above. The micl is occupied with Becker shovels, the mixer has three flanges for retrofitting knife heads / choppers. Mixer, drive unit and hydraulic unit are mounted on a stable base frame; The scope of delivery also includes another frame for spring-supported vibration reduction.
usava
Gross bar scale for filling open bags from 10 - 50 kg, with feed paddle screw incl. drive 1.1 kW for coarse and fine current dosing, with pneumatic sack clamp (200 mm) and automatic bag drop, mounted on an elastic stand frame. Last used for the filling of construction chemical products; good condition, last calibration in 2014.
usava
Electro-mechanical scale for fluids, with Hottinger load cell, pressure valve, pneumatically operated slide valve and magnet valve. In base frame / stand. ... mais informação