Fabricante:
(Categoría: 1402)
ca. 70 ton Conveyor baonder full rubber ( no steel insert ) well preserved used from Leende - Holland Price € 500,= per tonne Tel. 0031 653 160 178 ... más información
Groom Group Pneumatic suburban lifting beam with 2 x pneumatic chain hoists 40kN Type PVH K2/2x40kN Year of manufacture REP 08/2010 Factory No.: 078 Weight 980kg Serial No. 1313145 Total width approx. 4.7m Depth 0.6m Hoists 2x 40kn YOC 2010 Weight 980kg More available (approx. 15 pieces) e.g. SMT Scharf GmbH Lifting beam / Hubbalken HB-K2/P-3400 Load capacity 2x30kN Year of construction 2017 without chain hoists other smaller lifting beams / walkers with pneumatic chain hoists available (10 pieces) with suspension chassis, coupling (connector for several hoists).
BALKANCAR T-10232 0,5T hoist was manufactured in 1970 in Bulgaria. The hoist is powered by a BALKANCAR КГ 1605-6 electric motor with a power of 0.75 kW and is designed to lift workpieces with a maximum weight of 500 kg, to a height of up to 12 metres. The buttons on the control pendant allows to determine the direction of movement of the workpieces in the up-down or right-left axis. The electric hoist has never been used and its weight is 154 kg. Technical specifications of the BALKANCAR T-10232 hoist - maximum lifting capacity: 500 kg - maximum lift height: 12 m - lifting speed: 8 m/min - travel speed: 20 m/min - cable diameter: 5.7 mm - electric motor: BALKANCAR КГ 1605-6 - power of electric motor: 0,75 kW - rotational speed of electric motor: 910 rpm - voltage: 200 V; 50 Hz - total weight of T 10232 device: 154 kg
Steep conveyors for Earth material with rubber strap in dismantled condition Built in 1947 Weight approx. 680 kg Length 7 m Belt width 500 mm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Scratch chain conveyor MATEC For wood chip extraction -Trogwidth 300 mm -Troghheight 450 mm -Troglänge about 5500 mm -Steel sheet 4 mm -Creation below once about 65 ° -Discard height from ground about 4500 mm -single-stranded chain guide links A-A 80 mm -Conveyor slats plastic height about 130 mm -Drive snail gearbox engine electric 1.5 kW, 3x400 V, 50 Hz Weight about 1100 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Roller conveyor for frame saw to cross off promotion L x W x H: 150 x 230 x 100 cm Weight approx. 6000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Cross off feed for roller conveyor L x W x H: 400 x 230 x 80 cm Weight 4000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Cross conveyor for removal of boards L x W x H: 5 x 4 x 1 m Weight 3000 kg Built in 1978 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...
Chain cup movement in modular design, i.e. horizontal and vertical conveying path are variable (last selected installation: 6.0 m horizontally below > 3.0 m vertical > 18.2 m horizontally above). Incl. plastic pendulum cups, box vent 410 mm x 410 mm in different lengths, drive station with geared motor 1.1 kW / 56 UPM, conveyor chains, 2 pcs. deflection stations, clamping stations, return locks and 3 pcs. outlet stations. Conveyor speed: 0.25 m/s.
Transmitting vessel with 2,000 l. gross content, inlet with pneumatic cone closure (incl. 1 spare cone), venting and outlet via pneumatic squeezing valves. Conveyor lines on the side of the building. ... más información
Chain elevator in modular design, horizontal and vertical conveying distance are variable (last used setup: 6,0 m horizontally at bottom > 3,0 m vertically > 18,0 m horizontally at the top), Incl. plastic pendulum buckets, steel ducts 410 mm x 410 mm in different langths, drive station with gear drive 1,1 kW / 56 RPM, conveyor chains, 2 pcs. drive- directing-stations, tensioning-station, return stop mechanism and 3 pcs. discharging stations. Conveying speed: 0,25 m/s.
Pneumatic conveyor vessel with 2.000 l. gross capacity, pneumatically operated inlet cone (incl. one spare cone), pinching valves for vent and outlet. Without pipework. ... más información
Box feeder with steel scale strap and combined drive for belt and reel over pre-bed. Box dimensions: Approx. 2,000 mm x 750 mm x 500 mm high; incl. hopper (on box) with the following inlet dimensions: 1,600 mm x 1,200 mm x 360 mm high. Condition: Good substance; Motor must be overhauled, tape partially made viable.
Chain hoist with motorized chassis for steel beams, load capacity: 1,000 kg, lifting speeds: 5.4 m/min. (fast); 1.4 m/min. (slow), incl. hallway operation, without steel beams. Brakes and drives workshop overhauled / tested. ... más información
Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.
Electric chain hoist with travel motor for steel beams, hoisting capacity: 1.000 kg, hoisting speeds: 5,4 m/min. (fast); 1,4 m/min. (slow), incl. Pedestrian control, without steel beam. Brake and drives revised / function checked. ... más información
Rubberized, encapsulated vibrating channel with 2 outlets and 3 inlets of 200 mm , with 2 unbalance rs of 1.8 kW / 960 UPM. Rinne was used to press up 2 side-by-side Mogensen-Sizern. ... más información
Rubber lined, ensulated vibrating chute with 2 outlets and 3 inlets (200 mm Ø each), with 2 imbalance drives (1,8 kW / 960 RPM each). Chute has been used for feeding material in two side by side standing Mogensen sizers. ... más información
Type: 9.3-456, Y.O.M.: 1991, inlet: 400 mm x 400 mm, overhauled, without motor. ... más información