extrusoras usadas para la venta

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/  ... más información

Ermafa twin screw extruder B 2.95-35 D 1992/1995 -Extruration plant for recycling -with hot-tee, Filter -Drying centrifuge, -Degassing plant, -storage silo, -discharge silo, -Chain elevator. -900-1000 kg/h PP  ... más información

Plastics Recycling Extruder PP=900-1000kg Complete Line ... más información

Extrusion line model FCL 21/SH PRO-CAST Dolce with refrigeration equipment Brand (model): FCL 21 / SH PRO-CAST Dolce with refrigeration equipment No. 1 Release year: 2004 Manufacturer: BIELLONI CASTELLO s.p.a., Italy Three-layer cast extrusion line for the production of stretch film, made in Italy. Commissioning - 2005. The maximum real productivity is up to 800 kg/h depending on the thickness of the produced film. The winding speed of finished products is up to 350 m/min. Film thickness from 15 to 50 microns. Web width 1800 -2000 mm. Width of rolls of finished products from 125 mm. The structure of the produced film is A/B/C, the ratio of layers is 16/68/16. The composition of the line: three extruders are included, each of which works on one layer of film. Three Doteco dispensers are installed on each of the extruders, which allows mixing up to three components in each l ...

Thermoforming line for the production of OMV F-85 polystyrene plates, made in Italy, 2004, in operation no more than 2 years. The condition is almost new. The scheme of work is a closed technological cycle. Line composition: Extruder with a co-extruder D100 + D60 with a unit for mixing and dosing the material, calender unit, thermoforming machine F-85 with a system for stacking products, packaging machine, crushing unit, thermostats for calenders and thermal stamps, thermal stamp for dessert plates 167 mm 20 nests, thermal stamp plates flat 210 mm 12 nests with inserts for the production of plates 2x and 3x sectional. In working order.

I sell a line for the production of products from VPS and VPS (Extruder, VFM, Recycling) BU In prefabricated working order. made in China, 2014 There is an opportunity to demonstrate the line operability. Equipment: 1) PS extrusion line (DY-PSP 105/120) LONGKOU DEYLI MACHINERY CO., LTD. Capacity 200kg / h. Sheet width 1040 mm Max. Power consumption 125 kW. Overall dimensions V3m / W1.5m / D7m / D7m 2) Automatic Forming and Cutting Machine (DY-1040) LONGKOU DEYLI MACHINERY CO., LTD Max. Power consumption 156KW. Capacity up to 21.6 thousand pieces / h. W3m / W3.5m / D18m 3) Complex for recycling recycled polystyrene (Recycle machine) model DY-180 + 120/100 LONGKOU DEYLI MACHINERY CO., LTD (Crusher, Extruder, Grinder, Granulator) Productivity 90kg / h. Max. Power consumption 65KW. W3m / W2m / D5m 4) Dosing gas pump 4D-100/50 2.2 kW HANGZHOU ZHIJIANG PETROCHEM ...

Extruder for the production of three-layer LDPE film, German company Kifell. Capacity -150 kg/h. Foil thickness 0.03 - 0.2 mm. Width of upper rollers 1500 mm. Dolici double-sided winder 1230 mm. The width of the mouthpiece is 70 mm. Year of production 1985, in continuous production since 2010, available for viewing and testing in our company.

We sell lines 80/156, 65/132 and 55/110 for the production of WPC products (terrace boards, siding, fence boards, window sills, panels, logs, etc.) The equipment is installed at the enterprise, fully operational, and can be started. We will help with commissioning and training ... más información

Extrusion line for the production of heat-shrinkable OPS (oriented polystyrene) film Product structure A/B/A Recyclable materials (mixed) SBC, GPPS Thickness 40-60 microns % shrinkage 70-72% Net width / when leaving TDO 2780 / 3200 Main extruder ZSK Mc70 plus Coextruder 50 mm Static mixers - in the main extruder and co-extruder lines. Die - Nordson Autoflex VI-R H40 Die 750 mm (28 bolts) Roll stack - 2 shafts (with mirror surface - chrome) MDO 6 shafts (1, 2 - preheating; 3-4 stretching 1:1.2; 5.6 - annealing) 2 thickness measurement sensors from NDC (USA, UK) with automatic thickness control, new control equipment installed in 2018. (computer and software), sensors - overhaul in the UK from the manufacturer (NDC) - 2019-2020 TDO stretch up to 1:5 Filmatic winder from W&H (Germany), Max. roll diameter 580mm, expandable to 800mm line speed (mechanical) up to 50 m/min Volt ...

New manufactured in 2024. Plastic blow extruder, very suitable for pure and recycled materials. It can blow PLA, HDPE, LDPE and LLDPE pipe. All suitable for making plastic bags, plastic packaging, etc. Double winding machine to make it possible to extrude two coils of sheet at the same time, plus one coil of pipe. It is connected and working, so it can be tested. - Autoloader raw material included - Screw Diameter: 60 mm - Screw Length (L/D): 30:1 - Film Width: 400 - 1000 mm - Film Thickness: 0,006 - 0,10 mm - Max.Extrusion Output: 80 kg/h - Die Size: 100/200 mm - Blower: 3,7 kw/h - Cylinder Cooling: 0,13x3 kw/h - Driving Motor: 22 kw/h - Total power: 40 kw/h - Cover Dimension LWH (meters): 52,34,5 - Weight of Machine: 3000 kg Excellent condition, only superficial scratches from transportation and assembly; nothing affecting its operation. Taxes and transportation ...

cutting diameter: 280 mmcapacity 90 degrees: flat: 380 x 260 mmcapacity 90 degrees: square: 260 x 260 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3440 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated capacity: 2000 Wattwork piece lenght: 1075 nmTemperature range: 15 - 40 °Cdimensions: 550 x 1100 x 1200 mmtotal wight: 200 kgMobile laser welder with PenWelderhand-held PenWelder:- pulsed laser operation- average laser power up to max 500 W- Pulse duration 1 to 200 ms depending on application- peak pulse power 1000, 1500 or 2000 W- Siemens control- Integrated protective gas supply- Exchangeable -, adaptable process module (contact tips)- Pilot laser from laser source- Laser parameters via control panelLaser light cable LLK-A / BF 10:- Diameter(µ): 300 / 400 / 600- Length(m): 4 / 6 / 10 / 20Unit little usedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning dia. over bed: 3.520 mmturning diameter over slide: 3.000 mmturning diameter over slide: 2.440 mmturning length: 15.000 mmControl: Sinumerik 840 D SL turning speeds: 50 U/minworkpiece weight max.: 80.000 kgturning diameter: orig. 3500 / mod. 2400 mmaccuracy +/-: 0,01 °total power requirement: 110 kWweight of the machine ca.: 154,4 tdimensions of the machine ca.: 20,7 x 6,0 m- The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system.- In the course of the work, it became apparent that the two double-row cylindrical roller bearings had to bereworked.Thus, the entire bearing arrangement was modified and optimally adjusted.- In addition, control and safety-related points had to be modified.- Geometric acceptance report- Temp ...

x-travel: 250 mmy-travel: 200 mmz-travel: 90 mmcontrol: 5D HSC 6000 A-axis: +/- 180 °b-axis: +25 -15 °spindle turning speed range: 40.000 U/mintool taper: HSK 25 E min./max workpiece dia.: 3 - 10 mmtool change unit: 7-fach total power requirement: 7 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 0,78 x 1,85 x 1,165 mThe machine for dental use- suitable for metal, plastic, wood and zirconium blanks- 5 axes simultaneously- Milling spindle HFS 201 quick-change (has been overhauled)- High-frequency spindle HFS 301 quick-change (5,000-40,000 rpm, 3000 watts)- Additional tool change magazine with 14 places (linear pick-up system with collision protection)- Tool length scanning- Control software on Windows XP Professional: Adoption of DIN 66025 commands (G-code)- W.Loader workpiece changer for up to 30 blanks- Max. height of blanks: 25 mm- Extraction unit for effective di ...

total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m6-axis industrial robot YASKAWA MH502 CNC rotary tables1. rotary table 1 and rotary table 2limited Nmax=1.300 1/minReduction ratio I= 1:72Nmax: Reduction ratio and Nmax motor corresponds to 120°/sec on the tableMdnenn. Output = 828 NmMaximum centric loading weight = 15 kNCentering force from inside to outside clamping = 7,540 N @ 6 barCentering accuracy in the gripper = 0.05 mm [PA]Rotary field restriction depending on cable and hose situationProvided for ± 720° (provide for this in the robot controller)Motor: YASKAWA SGMRV-20ANA-YR11Milling spindle: AMTRU (CH), type Flexicut 250Gearbox: ZAE Hamburg, type: S100B-1300/65-HOX-72.0:1-3000Version: with Yaskawa servo axis + ZAE worm servo gearboxThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 700 mmy-axis: 1.000 mmz-axis: 500 mmmax. table load: 900 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3D coordinate measuring machine- PC with software, various probes- Renishaw PH10MQSoftware: PC-DMIS Pro 3.7 Maintenance Release 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 600 mmy-axis: 300 mmz-axis: 200 mmmax. table load: 25 kgtotal power requirement: kWweight of the machine ca.: 40 kgdimensions of the machine ca.: m3D production measuring system15-inch monitor (mounted on a transport trolley)As good as new, only used 4-5 timesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting speed: 15 - 90 m/mintotal power requirement: 2,4 kWweight of the machine ca.: 0,95 tdimensions of the machine ca.: 2,15 x 1,5 x 1,65 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información