outras máquinas de eliminação e reciclagem de resíduos usadas para venda

Recycling machine trade AGICOM- Pedergnana OG, Technical data of the alligator shears S 900: Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4.2 x W 1.2 x H 1.7 m Total weight: 7.5 tons Manafacture: Lefort Overhauled used machine; Machine ready for use! On hand

AGICOM Recycling Machines: Used recycling plant for cables, composites, small electrical appliances. Plant components recycling plant CR300U used: Single Shaft Shredder MR1740 Granulator CMG4050 Zig Zag Separator Turbine Mill Ghibli 352 Separator SA200 Filter tower 16 sleeves Capacity approx. 300 kg/h/modular design

Recycling machine trade AGICOM-Pedergnana OG: Refurbished used machine, operational, in stock. Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4200 x W 1200 x H 1700 mm Total weight: 7.5 tons  ... mais informação

Recycling machine trade AGICOM- Pedergnana OG: Cable peeling machine MAXI 100 DEMONSTRATION UNIT The compact MAXI 100 cable peeling machine can be used to process cables with a diameter of 6 mm to max. 90 mm. Thanks to the tried-and-tested two-knife system, the cable insulation is cut open and the copper or aluminium core can be easily removed.

Recycling machine trade AGICOM- Pedergnana OG: Tabletop cable peeling device Junior, DEMONSTRATION DEVICE. The machine is ideally suited for extracting copper from the thinnest electrical cables (with rubber or PVC sheathing). Cable diameter: 2 mm to 28 mm  ... mais informação

Diameter cable: approx.18 to max. 180 mm Separation speed: approx. 32 m/min Drive control: approx. 11 kW Dimensions: approx. 1880 x 1400 x 1560 mm Weight: approx. 1,900 kg Knife adjustment: hydraulic Height adjustment: hydraulic Condition: used, operational  ... mais informação

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.

Master Magnets Permanent Magnet Strap Length frame A.A.= 2200 mm , belt width : 700 mm. Block : L= 1450 x W=600 x H=200 mm. Power Requirement : Hydromotor  ... mais informação

- Engine power 11kW - Control PLC supported, with two-hand safety circuit - Cutting force 2x20to - Cutting speed approx.33 mm/sec - Cutting channel for rolls to be processed by max. roll length approx. 2500mm max. roll diameter approx. 1400mm - Machine weight approx. 4.5to - Tank capacity approx.160litres - Ambient temperature +5°C - Heat dissipation up to 2 kW - Hand guard grille in the area of the control panel and opposite Machine in stock and immediately available More information and price on request

For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Engine power 7, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 30 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roles dur diameter approx. 800mm - weight of the machine ca. 2900 kg - noise <80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand guards machine available now Subject to prior sale Price and further details on request

Motor power 11kW with double pump Control SPS, supported two-hand operation -with a key-operated switch for control voltage / from Cutting force 2 x 20to Feeding channel working width max width 2500 mm loading channel working height = height = 1535 &gt; mm extended knife steel under-sink reinforced, straight version incl. two openings for forklift loading -Colours: Corpus RAL acc. to customers request Cutter bar &amp; grille Ral1028 / melon yellow delivery time: approx. 12-14 weeks Price and photos upon request

The Rollenspalter is suitable for the columns and crushing of wrapped paper, cardboard or plastic rollers on core, or bail. Power 7, 5kW Control Siemens PLC supported with two-hand safety control -Cutting force 2x20to -Cutting speed 22, 3 mm / sec -Cutting channel length 2000 mm -Cutting channel height 1200 mm -Machine weight approx. 3500 kg colour of machine body RAL 7016 (anthracite grey) Guard RAL 1028 (melon yellow) Photos and more info on request Delivery time: approx. 12-14 weeks

For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Power 5, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 25 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roll diameter 800 mm - weight of the machine approx. 2500 kg - noise level < 80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand Guard - color machine/Cabinet - RAL 7035 (light grey) guard - RAL 1028 (melon yellow) machine immediately available Price and further details on request

- Engine power 7.5kW / 32 amperes - Control PLC supported, with two-hand safety circuit - Cutting force 30to Cutting channel designed for: - max. roll length 1500mm - max. roll diameter 1200mm - Machine weight approx. 3000kg - Hand guard grille in the area of the control panel and opposite - Forklift riding shoes are used for easy and safe transport of the Machine by forklift - Spaltertisch straight version Colour blue Machine immediately available

-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 850 mm -Machine weight approx. 3, 4to -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request

-Engine power 7, 5kW -30to cutting force Cutting channel designed for -maximum roll length 1500 mm -maximum roll diameter 1200 mm -Machine weight approx. 3000 kg -Tank capacity ca. 100Liter -Hand guards in the area of the control panel and to present -Splitting er table straight version Documentation 2 German (1 x writing, 1 x CD) Being body RAL 7035 light grey Guards/blade RAL 1028 melon yellow Ibkah3p Machine in production / available from 04-2019 Price and further details on request

-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 1250 mm -Machine weight approx. 3, 9t -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request

Recycling plant with all necessary permits for the processing of wood, metal, plastic, compost, etc. is provided the supply of biomass to operate a remote heating system with 2-3 MW of power. There are corresponding contracts with energy buyers. Plot 7200 m2, fixed and is partially built over 2000 m2 Preparation year 2012-more information at Peter Ari Schär of MATEC Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland

Builder: KOMPTECH Model: TOPTURN X67 Year: 2011 Operative Hours: 2.700 h Country: ITALY  ... mais informação

Builder: SEKO Model: SAMURAI5 650/250 Engine: DIESEL 118 kW – 160 HP Data: L. 8.000 x W. 2.900 mm x H. 3.200 mm Hourly Production: 25 m³/h Shredding System: 2 COCHLEAS and 198 BLADES Weight: 9.500 kg  ... mais informação