rociadoras de cola usadas para la venta

Inv. Num. : 5133 Type: ACTIVA/1-48 Producer: STEFANI Created: 2001 Parameters: Edge thickness: 0.4-16 mm Part thickness: 10-60 mm Minimum edge length in slats: 260 mm Minimum length of solid plywood: 260 mm Compartment capacity: 1.6 kg Drawer capacity: 8 kg/h Space for mounting the device: 1270 mm The machine is in good condition.

Banding thickness max 3 mm Plate thickness max 50 mm Thickness of roll material max 3 mm Workpiece width min 70 mm Feed max 10 m/min Preheating zone Glue system granules Glue basin at the bottom Quick-change glue basin Joining milling unit Cross-cut saw unit 2 engines Flush/Radius/Chamfer Stations 1 Corner Copy Unit 1 engine Scraper unit Profile Scraper, Flat Scraper Buffing unit Stripe magazine Units clocked pneumatic Execution Right-wing machine Machine length 4,150 mm Control BRANDT EASYCONTROL EC 10+ CE mark Total connection 9.5 kW Very good condition

-Feed rate 12 m/min. - Touch screen control panel at eye level -Central - Glue basin Teflon 3 kg - Pneumatic roller capping - Pneumatic cylinder for workpiece spacing - Joining milling unit with 2 pieces of HM joining knife heads motors 2x1.4 kW, 200 Hz, 9000 rpm (1 x synchronous, 1 x counter-rotation) - Heating lamp for preheating the plate - Pre-capping from the roll - Flush and radius milling unit top and bottom with vertical and horizontal keying. 2 motorsx 0.5 kW, 200 Hz, 12,000 rpm - Shape milling unit (corner cutting) at the top and bottom, for flush milling and corner rounding of PVC edges Motor 0.55 kW, 200 HZ, 12,000 rpm. - Radius scraper unit Scanning from above, below and to the side For rounding pre-milled PVC edges. - Buffing unit for gripping the edges at the top and bottom. 2 motors x 0.18 kW, 50 Hz, 1400 rpm - Spray nozzle syste ...

Glue cartridges Kappsaege Buendingfraesen Scraper Radius Scraper Glue  ... más información

Wood Her Tria 120 Full car. Edge magazine Full car. Roller magazine - cross-cut shears Banding - 20 mm CARTRIDGE PU GLUING STATION Flush caps Flush - Chamfer - Radius Milling/Digital - 20 mm Soundproof booth from retirement Machine is WORKSHOP OVERHAULED  ... más información

SPECIFICATIONS: Max. gluing height mm: 55 (polyurethane glue) Workpiece length min. mm: 250 Aggregates: Headjoints/Milling Cutters/Cutters Rounding unit/edge cutter Edge trimmer  ... más información

4 Roller Glue Applicator Make Friz Working width approx. 2600 mm 4 Roller Glue Applicator 2 rubberized rollers 2 steel rollers  ... más información

Edge banding Holz-Her Type: 1417 Sprint Year of construction: 1999 Banding thickness max. 8 mm Workpiece thickness = banding height 6 – 45 mm Workpiece width min. 60 mm Workpiece length min. 180 mm Workpiece protrusion via the transport chain on the assembly side 30 mm Feed speed 11 m/min. Feed motor 1.5 kW Swivel control panel Machinery: Pre-milling unit 1961 Edge feeding 1901 - fully automatic edge feeding of roll goods and stiff goods Glue application station 1906 or 1910 cartridge system Printed in 1913 Cross-cut unit 1918 – 2 cross-cut saw motors guided diagonally on round bars Milling unit 1942 – flush/radius/chamfering station Milling unit 1942 M – flush/radius/chamfering station Scraper unit 1929 - for radii up to 3 mm Form milling unit 1983 – 1 motor 0.6 kW 18000 rpm, copy corners up to 3 mm edge thickness Surface scraper unit 1964 – for  ...

Edge glue Brandt Type: KD 86 Built: 1993 Edge thickness up to 12 mm Glueing of roll up to 3 mm with pneumatic cross-cut station Glued part with Quickmelt pre-melting tank Heavy pressure zone with one driven and three reprint rollers Saw cutting station for the front and rear overstanding Milling station flush / chamfer Second milling station radius milling R 3 mm Corner copying with pass Radius drawing blade R 3 mm Chip catching box Schwabbelstation Pneumatic package for post-processing agregates Extendable support for large parts Control panel at eye level Space requirement approx. 6100 mm

Edge gluing machine Brandt Type: KTD 14 Built: 1996 Edge gluing machine with direct glue indication for gluing Edge materials on straight workpieces. Processing units: Install Glue indication Roller separation Flush milling Caps Workpiece thickness 10 - 40 mm Edge material thickness 0.4 - 1.2 mm Workpiece width min. approx. 50 mm Workpiece length min. approx. 260 mm Feed 6 m/min. Operating voltage 400 V+/- 10% - 3 Ph - 50 Hz Heating capacity 1.2 kW Connection value 3.04 kW Electrical connection cable length approx. 4.5 m Compressed air connection 7 bar Operating pressure 6 bar Weight: approx. 150 kg Space requirement: approx. 1800 x 1600 mm

Wood Her Auriga 1304 FU + PU Compact design - edge thickness 0.4 - 6 mm Control panel with selector switch for setting the units Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station cartridges + PU gluing Workpiece height 6-60 mm Auto. Glue height adjustment - PROBE NOZZLE Printing unit pneumatic Cross-cut unit 1918 pneumatic for rolls and strips up to max. 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit flush milling 6 mm, radius milling 3 mm, chamfer milling - 15° Scraper unit for chamfers and radii with 2 scraper carriers Pneumatic engagement and disengagement Surface Scraper Unit - Finish Machine WORKSHOP overhauled in TOP CONDITION from stock Lieboch

Type FZ-515 Thickness of panel 10-60 mm Edging thickness 0,4-3 mm Feeding speed 15 m/min Air pressure 0,8 MPa Total install power 6,5 kW Panel width ? 60mm Transport dimensions 3700x900x1700 mm Weight 1200 kg  ... más información

20-09-510 Edge Banding Machine WOODLAND MACHINERY (new) Type GB/T10850 Engine power 0.18 kW Air Pressure 3-6 Bar Voltage 220 V 50 Hz Total Power 1.4 kW Heating Capacity 1.2 kW Edge width 8-50 mm Edge thickness 0.3-3 mm Feed speed 0-26 cm/s Vacuum workpiece Attraction Transport Dimensions Weight 300 kg

Price 3900 Eur (EXW Jonava, Lithuania) Type SBR-250 Working width 230 mm Useful working thickness 100 mm Spreading roller diametre 150 mm Feed speed 28m.min Motor power 0,18 KW Height of working surface 790 mm Additional accessories are available: In-feed stainless steel idle rollers transfer € 550,00 net Out-feed PVC idle rollers transfer € 580,00 net Variable speed with inverter (5/25 mt./min.) € 750,00 net 1 set of two spare rubber rollers € 1,890,00 net Made in Italy Weight 90 kg CE

Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg  ... más información

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg  ... más información

Type ART. 200 Set with a single gun Pipe long 4 m Glue container 5 kg Universal nozzle Made in Italy Weight 10 kg  ... más información

With magazine  ... más información

Code: 0274 Brand: BCR - ITALY Model: Y 2005 - CE Standard Automatic edge bander for wood, pvc, veneer, abs and various materials, for furniture, custom-made furniture, kitchens, panels and various - CE Standard Edge thickness max mm 5 Max panel height mm 60 Composition: Gluing unit Shear for cutting roll material 2-blade end cutting unit - Inclination 0-6° - Motors Hp 0,4 each End trimming unit/bevelling unit - Motors Hp 0,75 each Protection cabin Hanging control panel Suction mouth diameter mm 120 Compressed air 6-7 atm Overall dimensions mm 3400 x 1000 x 1500 h Weight kg 850

OTT Tornado - TOP Control - via a 15-inch colour touch monitor for full automation and maximum ease of use CM-CombiMelt gluing system Suitable for the processing of EVA and PUR hot melt adhesives as well as all common cleaning granules Joining machining part for attaching chipboard Automatic Roller Magazine Automatic Edge Magazine Double cross-cuter, automatic swivel 0° / 3° Flush milling machine - for flush milling - 12mm Fine milling machine RADIUS - Radius milling - Profile knife R2 - R5 Automated Copy Milling - Corner Rounds Scraper Device - Radius Surface Scraper Device Lubricant Spray Device - PU Cleaning set with fine buffing device very stable workpiece support with roller conveyors - FRONT with scissor pull-out Complete tooling included First delivery 2012 Machine is WORKSHOP OVERHAULED in TOP CONDITION