otras máquinas y plantas usadas para la venta

Make: Kidde Fire Protection Item: Graviner MK6 Detector Head Model: E3561-301 Condition: Used unit in Good working condition, carefully checked and tested by our experts.  ... más información

Checkweigher manufactured by Thermo Ramsey Italia S.r.l. RXM model. Year of construction 2008. Machine for checking weight deviations from the nominal weight of a series of similar objects. These deviations are then compared with the previously set accepted weight limits and the weight trend of the products from the production line on which the equipment is installed is automatically calculated. The machine consists of an electronic control panel and a main frame on which the transporters weighing and carrying objects are mounted. The high-speed processing comparison system has a detector that continuously converts the weighing plate position signal that changes during weighing (the passage of an object through the weighing plate) into an electrical signal. The weighing signal from the weighing plate is amplified and electronically processed. It is converted to a number and a compa ...

SPECIFICATIONS: Load capacity kg: 250 Chain length mm: 3500 Complete with remote control  ... más información

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

3516B Marine Auxiliary Engine 1345 kW / 1200 rpm  ... más información

LINX-SL501-CO2-Laser Engraving machine equipped with fume extraction unit. Machine in perfect working condition. LINX SL 501 is one of the fastest Laser marking machines ever, it makes 90 marks per minute and its developed for the line productions for marking glass, papers, plastic and other non metal parts, As well metal, but just taking coloured skin out.

Blister and paper welding machine  ... más información

Industrial Metal and plastic cleaning machine: COLOR-DEC ITALY GREAT CONDITION  ... más información

Furrance 300c- HERAEUS T6120 Machine is in good working condition  ... más información

CS Instruments Leaking detector for comprressed Air systems controling. Unused in Suitcase.  ... más información

- Payload: 6000 kg - For standard skips 4 - 7 m3 (see photo) - Lifting: by hydraulic system, with integrated hydraulic pump - With complete electrical control - Motor: electric 400V 50Hz - For lifting and moving skips within the company site. (1 person, walk speed)  ... más información

Laser cutting machine from our exhibition with 150 watts of laser power Delivery time: immediately available ----- Turn it on and get started ----- ----- machine with only about 50 operating hours ----- ----- Year of construction: March 2022 ----- professional machine ----- - incl. Windows10 PC system / monitor / keyboard / mouse - Manufactures installed cutting and engraving software in German - Coordinated and immediately ready for use - Machine masters very fine engraving as well as precise cutting of thick wood or acrylic glass. - very versatile cutting machine. - Cutting wood up to 20mm thick - Cutting of arcyl glass and many other plastics - cutting fabrics, plastic fleeces, etc. - Cutting rubber mats - Engraving on wood, concrete, stone, many plastics - Production of stamps - Heavy industrial quality - Travel 1300 x 900mm - Drives with hybrid  ...

T-Shape 3 in1 Multisystem // Year of manufacture 2020 T-Shape combines 3 powerful technologies that work simultaneously to promote the production of collagen and significantly reduce the local volume of fat and elasticity of the skin. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness - Tightening of the skin - Reduction of cellulite - Reduction of fat deposits - Reduction of scope - Treatment after liposuction - Face lift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar and hexapolar radio frequency signal. Heat is generated by the contact of the RF (radio frequency) energy with the tissue impedance. With proper heating, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, an ...

Qty. 2 Second-hand pickling lines Mfc.: Sundwig Built: 1968 Tank of clean HCl: 50 m³ Tank for dirty HCl: 50 m³ Strip width: 1525 mm Qty. 3 Tanks interconnected one for each bath 310 m³ Qty. 3 Baths HCl 152.5 m Double bath pre-washing water Bath for final water washing Heater Chimney for taking out the acid vapors Acid pumps Auxiliary pumps Leveling machine Mfc.: AEG-EMG Built: Oiling machine Mfc.: Sundwig Built: Coiler Mfc.: Sundwig Built:

Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalEl ...

1. STRIP WIDTH: 300-750 MM, THICKNESS: 0.2-1.5 MM, CAP.: 17500 T/A., MODERNISED: 1995 & 2005 2. LOOPING SLITTER, STRIP WIDTH: 200-356 MM; THICKNESS: 0.05-0.5 MM, CAP.: 5500 T/A., 3. STRIP WIDTH: 300-365 MM, THICKNESS: 0.5-2.0 MM, CAP.: 6500 T/A.  ... más información

Qty. 1 Second-hand JCO pipe welding line Mfc.: Korean Company Installation date: 11 - 2008 Production types: KS, JIS, ASTM, API, Material: API 5L. 2B.X-80under mild steel Product capacity: 70,000 ton/year Product size O.D.: 406 – 1676 mm - 16”~66” Length: 5~16 m Wal Thickness: 9~80 mm Voltage supply: 440 V or 380 V, 220 V, 60 Hz Manufacturing process: Plate stacking Edge Milling Pre Bending Press Forming Tack Welding Welding Calibration Machining Pipe Ends Hydro Static Test NDT (RT & UT)

Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application in 2005. Before the production has been stopped was the press in excellent condition. The plant has been stopped in 2010 due to ecenomical situation. Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head) Exit sıze of and plate: 500 mm Scope of supply: Feeding system Billet furnace Extrusion press Run aut table 45 mt long Cooling table (belt type ) Strecher force: 200-300 ton Die oven Finsihing table and saw Billet furnace ( 2 pieces) one natural gas type one induction type JUNKER Hot saw Operation desk PLC  ...

Feed Pump  ... más información