máquinas para pacotes tipo almofada usadas para venda

horizontal bag machine Gekupack GK Industries Mini 260 New machine Packaging machine for pre-made bags: doypacks, block bottoms, flat bags, ... Suitable for confectionery, animal feed, powders, legumes, small iron parts, nuts, snacks, ... NEW MACHINE! Built in 2022 on behalf of the customer, but never delivered due to difficulties on the customer side. The machine is immediately available! Workspace: 130 mm - 310 mm bag width 130 mm - 350 mm bag length Achievement: approx. 15 - 20 packs per minute (depending on product and film material) Omron PLC - Panel, Relay, Temperature Controller HMI Panel 10" color display (touchscreen) Schmalz Vacuum Generator Panasonic Servo Drives Stainless steel Protection class IP 54 Power supply 220/230 V, 50/60 Hz Power approx. 2.2 kW Compressed air consumption 520l/min, 6-7 bar Supported bag materials: PE, PP, LDPE, PLA, k ...

Clocked, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch form, fill and seal machine Machine type: SVB3601R Year of construction: 2000 Clocked form, fill and seal machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeders Machine type: FVS 3091 SQ Products suitable for dosing: -Granules -Powder -Icing sugar -Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch checkweigher Machine type: KWE 5000 Year of construction: 2009 The plant was dismantled and stored due to product changeover. 6 months before the removal of the machine, a lot of investments were made, including the installation of new sealing jaws and a new display. We ...

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

Fuji Flow Pack Packing Machine. - Year of construction 2014/15 - Type: FW 3710/Ba 7 - Last used for packing whole bread With Anritsu Checkweigher, built in 2014 - Type: Approval T 10530 and Anritsu X - Ray X-ray machine, year of manufacture 2014 - Type Insprection Systems KD7 405 AWH Instruction manual on request. As well as delivery with commissioning on request

Flowpack machine Flow-wrapping machine Manufacturer: Type: DIBIFLOW 500 Year of construction: 2022 Horizontal rotating packaging machine with spool from above Cantilevered structure in aluminum and painted steel (RAL 7035 GREY – RAL 5002 BLUE) and stainless steel housing AISI 304 stainless steel parts that come into contact with the product Adjustable support legs Side-adjustable guides Studded loading belt, length 1600 mm (standard) Pressure lugs with fast extraction in plastic material suitable for contact with food Longitudinal welding machine with two pairs of wheels Diameter 120 mm the first cold to pull the second hot for welding Single-sector turnstile welding machine with a width of 240mm Independent temperature adjustment (cross welder and longitudinal welding wheels) Electronic safety coupling on the transverse welders Tunnel / film conformer with ...

Hugo Beck Flexo 500 s-e Year of manufacture 2008 With shrink tunnel Package Dimensions: W 25-450mm, H 2-200mm, L 80- unlimited Incl. lockable measuring blade  ... mais informação

Rontech TR A4 rotary feeder for BVM; State as is; suitable for BVM packaging machines; Format max. 420x297mm, min.120x100mm; Product thickness up to 5mm; Capacity up to 200 products/min. Rotation feeder Rontech TR A4 for BVM; condition as is; used for BVM packaging machines; size max.420x297mm, min.120x100mm; thiknes up to 5mm; speed up to 200 products/min.

Packaging machine BVM Compacta Trend; good condition; is cleaned and checked before delivery; Welding0 width 500mm; Passage height 220mm; treadmill finger conveyor belt 1600mm; SC 4530 shrink tunnel with plastic link belt; Discharge belt 1000mm. Side sealing machine BVM Compacta Trend; good condition; will be cleaned and checked before shipping; sealing width 500mm; hight 220mm; infeed conveyor with fingers 160mm; shrink tunnel SC 4530 with plastic belt; outfeed conveyor 1000mm.

Conveyor belt BVM; cleaned and tested; Width 1000mm; Length 2850mm; Self-management; Speed adjustable. Tape conveyor BVM 1000x2850; cleaned and checked; width 1000mm; lenght 2850mm; speed control; automatic control.  ... mais informação

Packaging machine BVM Compacta 5022 EMS Servo; good condition; cleaned and tested; Welding width 500mm; Passage height 220mm; with 2.Sonber welding stamp for plastic bag handle; optionally with shrink tunnel SC 4030 SD. Side sealing machine BVM Compacta 5022 EMS Servo; good condition; cleaned and checked; sealing width 500mm; hight 220mm; with secound stamp for plastic bag handle; for option with shrink tunnel SC 4030 SD.

Type HFFS Output: up to 100 packs per minute Bag length variable: min. 125 mm to max. 625 mm Product length: min. 90 mm to max. 500 mm Product width: min. 10 mm to max. 150 mm Product height: min. 5 mm to max. 150 mm equipped with print mark control  ... mais informação

Used flow wrapper PFM; Type: Tornado LD SS S Horizontal flow wrapper for gas-tight packs for M.A.P. applications. El. Connection : 380 V, 50 Hz, 17.3 A, 9.7 kW Net weight: approx. 1,800 kg Further data on request. Visits and test runs are possible by arrangement.  ... mais informação

Well-preserved horizontal pillow-pack packaging machine. Very well suited for cylindrical or other elongated products. Was used to extract a sausage in foil. Please see the video. Fully functional, there is some evidence of second-hand. Price on request machine is immediately available.

Packaging machine Hugo Beck Flexo 500 S; Condition as is; tested for function only; Product width 25-450mm; Product height 2-200mm; Product length 80-unlimited; Output max.60 cycles/min.; .max. Foil width 550mm; Conveyor belt 1000mm. Side sealing machine Hugo Beck Flexo 500 S; condition as is; only checked on function; product width 25-450mm; product hight 2-200mm; product length 80-unlimeted; speed up to 60 pics./min.; max foil width 550mm; Infeed conveyor 1000mm.

Pouch Form Fill & Sealingmachine manufacturer: Nagema, Germany Typ: HS1 capacity: max. 50 bags/min, infinitely adjustable closing: sealing dosage: volumetric doser like rice, candies, spicery etc. bag width: 120 mm bag length: from 50 200 mm adjustable dimension: 2,0 x 1,1 x 2,1 m weight: 900 kg Techn. State: used, very good state

Angle foil shrink-wrapping machine Masch. Item no.: K1276.672 Format max: 500x500x300 mm Shrink tunnel Passage height: 400 mm  ... mais informação

Professional horizontal packing machine from a reputed manufacturer. Suitable, for example, for packaging food, sweets, medical devices, technical articles, printing and paper products, household and toys, and textiles. Package width: 35 – 100 mm Ilbuifcbkb Package length: 65 – 160 mm Package height: 5 – 35 mm Capacity: 35 – 200 packs per minute Film width: 80 – 220 mm Machine weight: 450 kg Machine dimensions: Length 4.0 x Width 0.9 x Height 1.6 m 220V / 50 -60 Hz / 2.7 KW

Stick Pack Packaging Machine, Manufacturer Andreas Siebler For snus, portion bags liquid or powder, bag widths from 20 to 55 mm. 1-way up to 6-lane Base price plus accessories  ... mais informação

Packaging machine Beck Series Packer S 1732 - Used equipment built in 1986 -Operational The machine is equipped with a photo-electric control and regulates the work rhythm depending on the length of the packaged goods. This allows unequal parts to be packed in any order. The height and side adjustment of the machine takes place in seconds by means of a hand wheel. Functioning The machine works cycle by cycle, fully automatically with photo-electric control. The goods to be packed are introduced into the machine by means of a special infeed belt and shrink-wrapped on four sides. Oil hydraulics ensure exact operation of the welding system. The welding is carried out according to the impulse separation welding process and can be equipped with additional special welding elements. Odour nuisances are avoided by means of an exact, infinitely variable temperature adjustment of the w ...

Kallfass Universa 5050 Sprint, technical data: Welding frame dimensions: 500 x 500 mm Foil: Half tubular film, approx. 12 - 80 μm Foil roll outer diameter: max. 400 mm Film roll core diameter: approx. 76 mm Film roll width: max. 600 mm Working height: 850 - 915 mm Conveyor belt speed: infinitely variable Welding system: welding punch with wedge or profile shape continuous heating, temperature control and monitoring by PLC, specially coated, maintenance-free, completely odourless working Welding frame passage height: 110 mm as standard Power connection: 400 volt three-phase current, 50 Hz with protective earth Rated power: 3.5 kW Rated current: 5.1 A Control cabinet position: in working direction right Compressed air connection: 6 bar Compressed air consumption: 14 l/stroke Finish: Kallfass anthracite Kallfass Compact 650S, technical data: Tunnel passage width: ...