prensas usadas para la venta

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

Veneer press Joos Moulding press Pressing area 2500 x 1100 mm Pressing surface can be divided into three surfaces Pressing surface then approx. 3 x 650 mm x 1100 mm Aperture 550 mm Pressing pressure 2 kg/cm² Without heating plates With heatable mould  ... más información

Veneer press Wemhöner Moulding press Pressing surface 2600 x 1100 mm Aperture 1000 mm Upper surface can be divided into 4 faces, each 650 mm Pressing pressure maximum 4 kg/cm² Lower surface in 2 faces, each 1300 mm Bottom support with transport rollers Without heating plates  ... más información

Frame Press Hess Hydraulic Frame Press Type ECONOMIC Built in 1986 Electro-hydraulic Workspace Width 3050 mm x Height 2050 mm With hydraulic pump 0.75 kW 3 beams with pressure cylinders from above Fence side left 1 movable pressure bar from the right with 2 pressure cylinders Cylinder stroke approx. 150 mm Compressive force per cylinder 2100 kp (1kp = 1kg) Pressure plate depth 100 mm External Dimensions Space Requirements 3950 mm x 900 mm x H 2550 mm Loading dimensions approx. 3950 mm x 800 mm x H 2250 mm +Pallet with press bar (3 pieces) 2500 mm x 800 mm x H 1000 mm

Briquette press with extraction system Make Mütek Type MPP60 Year of construction 2011 Briquette mould cylindrical Diameter 50 mm Depending on the material, capacity up to 60 kg/h Drive motor 5.5 kW Volume of chip hopper approx. 0.7 m³ Weight of the press 680 kg Dimensions briquette press 1680 mm x 1100 mm x 1500 mm Height with container 2050 mm Including extraction system 33 filters, filter length 1300 mm, diameter 200 mm Extraction system filter area 27 m² Capacity 2,970 m³/h Fan motor power 5.5 kW Intake diameter 300 mm Overall dimensions with extraction system and fan 4300 mm x 1150 mm x height 3700 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, ma ...

Veneer press Ott Type: JU 65 Pressing surface 2250 x 1200 mm 2 electrically heated plates Total pressing pressure 65 tons Spec. Pressing pressure at full occupancy 2.4 kg/cm² Spec. Pressing pressure at 2 m² occupancy 3.25 kg/cm² Printing cylinder 4 x diameter 80 mm Rack and pinion guide Maximum opening between plates 300 mm Connection per heating plate approx. 6.0 kW Hydraulic pump approx. 1.1 kW Total connected load 12 kW Heating time approx. 20 min. Dimensions 2600 mm x 1330 mm x H 1760 mm Weight approx. 2800 kg

Frame press pneumatic Pressing dimension L 3550 mm x H 1850 mm 3 pneumatic punches from the top 1 sliding press bar from the right with 2 pneumat. Cylinders Bearing surface on the press cylinder 100 x 80 mm Dimensions: Length 4500 mm Width 600 mm Height 2500 mm Weight approx. 500 kg  ... más información

Continuous press Wemhöner Year of construction: 1978 Upper piston press – lower press table is always standing at a constant height Pressing area approx. 4300 mm x 1350 mm 8 pressing cylinders from above was used as a cold press Water pipes available for connection to hot water still electrically connected, in operational condition with 1 roll replacement continuous film 1400 mm wide

POR A6 Plus 1620h briquetting press Briquette diameter 60mm Round briquette Capacity up to 100kg/h 7.5kw main motor Hopper diameter about 1000mm Year of production 2017 Only 1620h worked CE Certified Weight about 750kg  ... más información

SPECIFICATIONS: Rotating frame press for glulam Max. working length mm: 3000 Max. working width mm: 1200 Thickness mm: min 25 - max 90 12 charging stations Complete with "Clam Carrier" pusher  ... más información

For sale second hand briquett press made by DIPIU. Completely renewed with overhauiln. Model MB 70. Price: 69.000 EUR EXW  ... más información

For sale second hand briquett press mde from CF Nielsen, model BP 6500, cy 2008, well condition. Price: 95.000 EUR  ... más información

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

On sale is a complete line for the production of longitudinal and transverse plates. 1. Weinig Dimter high frequency press. 2. Grecon Ultra4 longitudinal line. 3. Line for width connection Obel. 4. Hobelrotoles. 5. Timesavers 1350 mm grinding machine with three units. 6. Planer Schenko (with lifting platform for parcels) + conveyor belt + charger. 7. SLH cold width press. 8. Thermal tunnel for individual packaging of plates. 9. Glue applicator Inles. 10. Glue applicator for slats. 11. Obles line for longitudinal connection of slats.

Used zinc rod making machine for sale. Model No.: FAH Year of construction: 2010 Price: 90,000.00  ... más información

POLYPRESS is suitable for the flexible production of straight and curved components made of glulam. Their special design allows adaptation to a wide variety of assignments and steppings in the shortest possible time. Batch size 1 can be produced rationally with this press.  ... más información

Pneumatic frame press for windows and doors Different dimensional processing possible Terminal strip closure Material: Aluminum  ... más información

TECHNICAL DATA: Working width mm: 3000 Working height mm: 1800 Downholders: 5  ... más información

TECHNICAL DATA: Working width mm: 3000 Working height mm: 1700 Downholders: 4  ... más información

SPECIFICATIONS: Dimensions of the plate mm: 2300 x 1000 Number of pistons: 04 Piston diameter mm: 60 Water operation with boiler  ... más información