otras máquinas para el plástico usadas para la venta

Inv. Num. : 7465 Type:- Producer:- Generated: Parameters: The line consists of the following parts: Copper wire winder (double) Gumolis Insulation Line Injection 2x Bongard (Vein Spreader) Main street Gumolis Shell.line Compensator Line unwinder Coil Housing Line Auxiliary towing Compensator Cooling Enclosure Cooling water tank Outdoor refrigeration units Large pump water system Stolberger Filling Machine Wire rewinding workstation Round semi-automatic Welding foil package Mechanical Profile Projector HV test room Thermostat - Oven 5 x Temperature unit for extruder

Inv. Num. : 7416 Type: LXJ-2030 Producer: UNICH Created: 2014 Parameters: Laser power: 2x130 W Work table length: 3000 mm Work table width: 2000 mm Equipment: Radiator Compressor PC Software Exhaust fan The laser is designed for cutting plastics and wood.  ... más información

ZEMAT PULSA ECO 500 impulse welding machine was built in 2019 in Poland. The compact machine with an open design is ideal for the efficient production of canopies, awnings, pergolas, roller blinds, banners, etc. The individual temperature control of the upper and lower sealing electrodes together with InvisiWELD technology produces strong, practically invisible seams with high precision. Furthermore, the operator has special hand tools at his disposal for the welding of, e.g. tabs, pockets and zippers. The ZEMAT PULSA EC semi-automatic impulse welder was implemented in production in 2023 and since then has been used for only a dozen tests. The total weight of the machine is 1800 kg. Technical specifications of the ZEMAT PULSA ECO 500 welding machine - machinable materials: PVC, vinyl, polyurethane (PU), polypropylene (PP), polyethylene (PE), rubber, acrylic, thermoplastic materials  ...

STRATASYS F370 3D printer was manufactured in 2020 in the United States. The innovative machine is used in a wide range of industries, i.e. industrial, educational, medical and business, and is designed for rapid prototyping and the creation of complex components with the highest accuracy of detail. The resulting parts are printed using advanced FDM technology, which involves applying successive layers of semi-fluid material from a heated nozzle. This technology, combined with the auto-calibration function, makes the F370 industrial 3D printer provide high quality prints and dimensional conformity without the need for manual calibration of the device. The offered STRATASYS FDM 3D printer is equipped with additional filaments and GrabCAD Print software with menu available in many languages. The total weight of the machine is 227 kg. Technical parameters of the STRATASYS F370 3D prin ...

Hydraulic press 80 t of stable design and high press force was manufactured in 2021. The hydraulic vulcanising press enables efficient processing of rubber and thermosetting plastics in manual or automatic mode. Excellent parameters and two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm make the hydraulic vulcanisation press for rubber ensure high efficiency of 48 tons per month during three-shift operation. Technical specifications of the rubber press - press force: 80 t - heating plate dimensions (L x W): 1200 x 1200 mm - electric heating - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operation modes: manual or automatic - full technical documentation - CE certificate

Hydraulic vulcanising press 80 t built in 2021 is distinguished by its stable construction and high press force. The hydraulic vulcanisation press for rubber is designed for the efficient processing of rubber and other thermosetting plastics using two electrically heated heating plates with a length of 1200 mm and a width of 1200 mm. The hydraulic press achieves a capacity of 48 tonnes per month when operating in a three-shift system. Technical specifications of the rubber press - maximum press force: 80 t - electric heating - heating plate dimensions (L x W): 1200 x 1200 mm - distance between heating plates: 800 mm - dimensions of shelves (L x W): 1400 x 1400 mm - operating mode: manual or automatic - full technical documentation - CE certificate

ROTOX SZK 502 double head welding machine was manufactured in Germany in 2007. The machine designed to weld two 90° angle joints in one working cycle, achieves high process stability and optimum temperature of the welding plates and stop blades made of hardened stainless steel. Hollow PVC bar sections with a maximum length of 2550 mm are welded on a stable structure by two welding heads made of high-quality cast aluminium. The ROTOX double head welding machine weighs 550 kg. Technical specifications of ROTOX welding machine SZK 502 - machined parts: hollow PVC bar sections - maximum section length: 2550 mm - minimum section length: 440 mm - maximum section height: 160 mm - minimum section height: 30 mm - welding angle: 90° - welding stitch limitation: 2 mm - workpiece tensioning: pneumatic - screw spanner with hexagon socket 3 mm - jaw spanner 10/13 mm - control cabinet s ...

BIZETA BZ3T4P/8 welding machine was built in Italy in 1989. The machine is designed to perform a very precise and accurate welding of materials such as PVC and polyester by subjecting the surface of the material to high-frequency energy. Electricity in the form of an electromagnetic field generates heat, which softens the material and fuses its layers together. At the end of the process, the BZ3T4P/8 welding machine with rotary table cools the material surface while holding it under a high pressure of 22 tonnes, resulting in the formation of a very strong weld. The total weight of the machine is 3400 kg. Technical parameters of the high frequency welding machine BIZETA BZ3T4P/8 - welding force: 22000 kg - power: 22 kW - maximum working pressure: 160 bar - superposed circuits voltage: 110 V - power supply: 3x 380 V; 50 Hz - weight of machine BZ3T4P/8: 3400 kg

Laser printer for plastics FARSOON eForm 3D built in 2017. The printer is offered with complete equipment for preparing powder and cleaning prints. The equipment was used to a small extent for about 12 months, it worked for about 2000 hours. The device operated in a gas shield from a cylinder. Complete with printer: 8 nitrogen regulators. Technical data of the FARSOON eForm 3D printer: - open control software: any modification of printing parameters - laser type: CO? - laser power: 30 W - dimensions of the printing chamber (W × D × H ) : 250 × 250 × 320 mm - single print layer: 0.06 ~ 0.3 mm, adjustable - maximum creation / build speed: 0.8 l / h (depending on the material) - precise scanning system: Galvo - scanning speed: 7.6 m / s - power requirements: 380 VAC, 50/60 Hz, 16 KVA, three-phase five-wire - maximum temperature in the chamber: 190 degrees C - heating el ...

Plastic compactor Main drive 132 kW Complete system with recutting mill, fine material separation and recirculation, electrical control ... más información

Year: 2003 - technically efficient, ready to work - after full service - for the upper and lower hinge - centering the element - SPS control  ... más información

- technically efficient, ready to work - after full service  ... más información

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of the screwing unit - adjustable distance between screwdrivers 42-110 mm - Automatic screw connection - automatic automatic movement alignment - the ability to work as a screwdriver - screw depth sensor - powerless steering control - Specific feed account Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - screw depth sensor - horizontal pressure

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure

Year: 2019 - technically efficient, ready to work – after full service - automatic milling process - movable milling unit - 4 engines - pneumatic profile climping - hydropneumatic feed of the unit - stepless adjustment of feed speed - double-sided profile supports  ... más información

Year: 2012 The machine has been in production since 2017. - technically efficient, ready to work - after full service - four-head welding machine VS 750 - EV 850 4-axis CNC cleaning machine - transport/cooling station - rotating station - online connection - automatic work cycle - profile height: 30-185 mm - welding dimensions: 350 x 350 mm, 2600 x 4000 mm - 0.2 mm and 2 mm flash reduction - seal formatters - Windows touchscreen operator panel - drilling head for the lower/upper hinge - disc cutter 250 mm - 1 axis of longitudinal travel with gripper

- dimensions: 305 x 175 cm - brush strips - stable structure - adjustable leg height  ... más información

Year: 2007 - technically efficient, ready to work (after full service) - 3-spindle (high-speed motors) - possibility of setting for various profiles (frame / sash) - pneumatic profile clamping  ... más información

as good as new, used, fully functional Conveyor belt with separating roller for injection moulding • Often used as a machine discharge conveyor belt or robot storage conveyor belt • Stable base frame with H-shaped base stand, mobile • Stepless angle adjustment - see pictures - possible • Stepless height adjustment up to max. approx. 1300 mm • Stepless speed control • Clear conveyor belt width approx. 270 mm • Conveyor belt length approx. 1750 mm When using the screw separating attachment, the larger parts of the separating material are conveyed to the side with the help of the screw. Smaller parts slip between the height-adjustable drain plate and the screw roller. • Left-throwing separation system • Height of the separation gap can be easily and quickly adjusted using knurled screws • Scraper above the auger roller prevents unintentional skipping of  ...

A unique opportunity without intermediaries for people who want to become self-employed in the field of plastic injection molding! As of 1.3.24, we are actively discontinuing our activities in owner-managed plastic injection molding. We have been active in this field for several decades, both for our own products made of thermoplastics (ABS / POM / PC / glass fiber reinforced PA ), as well as on a contract basis for renowned companies. For sale we offer our small plastic injection moulding shop (without real estate and fixed building installations) as a whole - with currently 2 fully hydraulic Aarburg injection moulding machines type Allrounder 320-210-750 and 320-210-850 as well as all peripheral devices - all from well-known brand manufacturers, such as 2 Thermolift Arburg 100-2, various conveyor belts, various temperature control units oil and water, chiller for the cooling circuit ...