subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 842)
Qty. 1 Second-hand die cutter with flexo printing press Mfc.: M&M Mediterránea de Maquinaria Type: WRC 98 1150-1600/DISTENCO Built: 1999 Flexo printing press with 3 colours Capacity: 50,000 boxes in 1 shift Input material: cardboard of max. dimensions: 1,150 mm x 1,600 mm Output material: boxes (for pizza) Included in the scope: approximately 15 tools for different sizes of boxes New electronics The complete die cutter with flexo printer will require approximately loading on 2 trucks. The box production process is as follows: Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colours, cuts the box and sends it on with a conveyor and stacks it.
Kama DigitalCut 58 automatic punching machine with hot foil stamping The machine has faults. Year of manufacture 2014 Art.Nr. PS5992 ... mais informação
2003 The cutters Max 106 x 76 cm Max sheet size 760 x 1060 mm Min sheet size: 350 x 400 mm Paper 70g/m2 Solid board (depending on the quality) : up to 2000 g/m2 Corrugated board (depending on the quality) : up to 4 mm Speed: 12.000 sheets/hour Cutting force: max. 250 T Approx. total weight: 30 T Equipped with: Full APT in feeder and delivery Non-stop feeder PowerRegister with Baumüller drives Micro Centerline Quick lock system in stripping station Quick lock system in blanking station Chase loader Easytransfer device Frame changer Antistatic for paper Data management unit Extra side blow system Krifft & Zipsner logistic system Machine got a overhauling from Bobst (power register, cooling, lubrication and logistics for 120.000 EUR) In production Available: immediately Located: Germany
HEIDELBERG CYLINDER S -Max paper size 54x72 cms. -Serial n. 9041 -Complete with ink unit and rollers -New electric cabin with electronic speed control installed ( Inverter ) -Used for die cutting, 2 frames, all accessories -Excellent conditions ... mais informação
RABOLINI IMPERIA D -Manual hand fed die cutter, year 1988, totally refurbished in 2024 -Mechanical clutch converted into Pneumatic air system clutch -Max paper size 85x120 cms. -Timer for the speed control -Four spare frames and one spare plate ( total of 5 frames and 2 plates ), all tools and accessories -Very nice conditions, available immediately -Any test is possible in our warehouse also by videocall
Universal - Register punch Karl Tränklein - Type.: USM 900 - Year of construction: 1992 - Masch. Product no.: 1745 - Table size: 900 x 600 mm - Insert height: max.- 80 mm - with several punching heads ... mais informação
automatic calendar punch with non-stop feeder, box delivery with vibrator, various punching tools for calendars, etc. ... mais informação
Heidelberg KS, Year 1958 380x520 mm (14.9x20.5") Standard used for die-cutting Available: at short term ... mais informação
Heidelberg SBG, age 1963 540x770 mm (21x30") Die-cutting Available: at short term ... mais informação
WUPA PS 4.1 year 1973 - 2003 refurbished size 800 – 1,120 mm Min. size 360 – 500 mm Min. grip 14 mm weights 100 – 1,000 g/m2 Thickness max. 3 mm pressure 240 t Speed max. 4,000 sheets/h Stripping ... mais informação
Register punch Masch-No.: 52757/6 with printer 2 FA-OR. Cutting length 315 mm, depth 4 mm, max. 40 mm. Cutting thickness max. 7 mm. Clamping thickness: 1-9 books, max. 50 mm. Spine length max. 400 mm. min. Book width: without printer min. 4 mm cutting depth, max. book thickness 10 - 88 mm (with printer up to 95 mm). Connection 220V, 50/60 Hz, compressed air 6 bar, max. Speed 120/ min. Various knife sets
electric (380Volt) register punch with manual block clamping and register punch, bolt-action device for the production of registered handles, ... mais informação
Stripping Device, Varioplan System, Mabeg Non-Stop Feeder with Pre-Loader, Non-Stop Delivery, Centerline, Elevated, Sidelays On Operator And Off-Side, Formats: Max. 750x1050mm, Min. 350x400mm, Max. Cardboard Thickness: 1,8mm, Max. Corrugated Cardboard Thickness: 3mm, Speed: 9000 Sheets/Hour ... mais informação
Mabeg Non-Stop Feeder, Stripping Device, 100-2000 g/m2, Max. 6500 Strokes Per Hour, 320 Tons Cutting Pressure, Format: Max. 800x1120mm, Min. 500x360mm, Standard Accessories ... mais informação
Make Erba Model Titan 3 Year 1970 ? Max size 800 x 1200 mm Details 2 chases, threadle operated, complete with adjutment key ... mais informação
For punching out packing material (paper and cardboard) Various die-cutting stencils for chocolate bars and chocolates Produced at Hamburg. (cost approx. 300€) Good condition, still in use Y/O'A 1991 From Germany ... mais informação
Heidelberg KSB, Year 1969 400x570 mm (15.7x22.5") used for die-cutting Standard Available: at short term ... mais informação
Heidelberg KSB, Year 1964 400x570 mm (15.7x22.5") Standard used for die-cutting Available: at short term ... mais informação