máquinas de corte e de denteamento usadas para venda

pulling force - max.:2,5 tmax. ram stroke:1000 mmmax. workpiece diameter:40 mmBroaching speed:60 m/min.return speed:20 m/min.total power requirement:24 kWweight of the machine ca.:6 tdimensions of the machine ca.:1,7 x 2,4 x 4,77 mclamping plate:320 mm ... mais informação

max. wheel diameter:40-160 mmgear width:90 mmmax. module:3,5 min. module:1,25 weight of the machine ca.:5,6 tFor detailed technical data, see PDF File Page 15-16 ... mais informação

rolling capacity max.:2-20 tworkpiece diameter:100 mmtotal power requirement:2 x 8,5 kWweight of the machine ca.:11 tdimensions of the machine ca.:7,1 x 5,15 x 3,9 mDescription of the manufacturer:The ROLLEX® is more than an innovation offered by Profiroll in the field of Spline Rolling. This flexible machine type enables a rolling of splines onto most different types of shafts. The CNC-control combined with symmetric circular dies allow a manufacturing of splines with highest quality demands. Likewise the ROLLEX® is able to coldform profiles, threads and to perform finishing rolling due to its reliable Profile Rolling process.Circular Die Process circular dies for kinematic rolling with symmetric geometry this correlates to a rolling rack of infinite length a workpiece specific calibration phase achieving least tolerances is the result lowest changeover times due to compa ...

max. wheel diameter:80 mmmax. module:3 total power requirement:25-35 kWweight of the machine ca.:10 tworkpiece weight:15 kgworkpiece length - max.:-50+450 mmtable diameter:145 mmdiameter of hob:90 mmcutter length max.:220 mmhob turning speeds:1.000 U/min ... mais informação

rolling capacity max.:6,1 tworkpiece diameter:160 mmworkpiece length:25 mmtotal power requirement:14 kWweight of the machine ca.:4000 kgsdimensions of the machine ca.:2,5 x 2,5 x 2,1 mInternal rolling machine for transmission shift sleeves ... mais informação

max. wheel diameter:300 mmgear width:100 mmmax. module:5 workpiece turning speeds:0 - 1000 1/minwork piece - max.:1100 mmworkpiece clamping:auto. tension device number of spindle speeds:1000 1/min.spindle bearing diameter:100 mmdiameter of spindle flange:120 mmtailstock travel:80 mmweight of the machine ca.:3500 KGdimensions:1200 x 1450 x 2250 mmtotal power requirement:10 kVAThe Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

max. wheel diameter:200 mmgear width:250 mmmax. module:3 min. module:0,5 total power requirement:45 kWweight of the machine ca.:8,5 tdimensions of the machine ca.:4,4 x 2,4 x 2,7 mMachine out of prototype productionWithout automation ... mais informação

Description: The system consists of: Mitsibishi robot, type RV-6SL-S12 (currently defective) , year of construction 2008 , payload 6 kg incl. control and control unit rotary table and the Rollscan 300 from Stresstech , set up as shown in the layout weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 3,450 x 2,359 x 2,200 mm

Description: 6 baths weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 10,500 x 3,000 x 3,400 mm ... mais informação

Description: The system consists of: Face Plate , (diameter 2000 mm) Manipulator , AUBO ROBOTS, type Auboi5, equipped with camera weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 2,300 x 2,000 mm ... mais informação

Description: The Gleason-PFAUTER CNC Gear Shaping Machine P 1200 S offers an extensive working range and impressive technical data. With a nominal workpiece diameter of 1,200 mm for external and internal gears and a maximum workpiece diameter of 1,400 mm without a counterholder, it is extremely versatile. Control and Machine Number Control: SIEMENS Sinumerik 840D Machine number: 30 114 Working area Table diameter: 1200 mm Table bore: Ø 300 Workpiece specifications Max. orbital diameter: 1400 mm Nominal workpiece diameter (external and internal toothing): 1200 mm Nominal module max.: 16 mm Toothing width max.: 350 mm Shaping head specifications Max. stroke rate of shaping head: 80 min-1 Please take a look at the technical data and layout plans in the PDF file.max. wheel diameter: max. 1400 mm, module min./max.: max. 16, gear width: 350 mm, control: SIEMENS Sinumerik 840 D, tab ...

Hydraulic tailstock, Ø max. gear: 250 with 3 cutter, Module: 5,5, Hobbing length: 70, Cutter module: 5,5, Outside ø max. acknowledged: 300 mm, Ø spindle: 85 mm, Ø hole table: 39 mm, Ø table: External centering Ø139,75, Power tool motor (b): 4 Cv, High: 1.800 mm, Long: 1.450 mm, Weight: 2.450 Kg, Width: 1.000 mm

Divider, counterpoint, dividing discs, useful sharpening bits, useful sharpening blades, cones and grips., Specification: Universal ... mais informação

 ... mais informação

Specification: Universal ... mais informação

Shaft holders, dividers, Wheels / axis milling, dividers, wheels, High: 1765 mm, Long: 2570 mm, Width: 1100 mm, Weight: 2500 Kg, Ø tool: 250 mm, Total power: 7.5 kva., Travel of table: 400 mm, Height of centers: 125 mm, Power wheel motor: 3 Kv., Ø max to sharpen: 250 mm, Distance between points: 635 mm, Revolutions of the wheel: 1750/2150/2850 mm, Maximum length to sharpen: 400 mm, Radial travel axis wheelhead: +35 / -65 mm, Vertical travel of the wheel: 175 mm, Cone holder shaft clamping pieces: ISO 40, Speed continuous longitudinal table: From 30 to 1000 mm / min., Specification: Strawberry mother

Cooling equipment - weight: 200kg L 1,700 x W 800 x H 900 cm, High: 2.100 mm, Long: 2.400 mm, Width: 2.400 mm, Weight: 2,500 Kg., Voltage: 380 V, Total power: 4 Kw, Wheel speed: 2,250 / 6,000 rpm, Grinding length: 400 mm, Ø max workpiece: 320 mm, Transversal stroke: 260, Longitudinal stroke: 400 mm, Distance between points: 700 mm, Race car rolling (x axis): 400 mm, Vertical travel of trolley wheel: 280 mm, Specification: Universal

Divider, Wheels, Chucks, Divider Discs, Points, High: 1.500 mm, Long: 1.100 mm, Width: 1.400 mm, Weight: 600 kg, Voltage: 220/380 V, Ø tool: 200 mm, Total power: 1.5 HP, Wheel speed: 3,000 / 6,000 r.p.m., Grinding length: 450 mm, Ø max workpiece: 300 mm, Transversal stroke: 300 mm, Longitudinal stroke: 450 mm, Distance between points: 450 mm, Tilting the tool trolley: +/- 20º, Race car rolling (x axis): 450 mm, Vertical travel of trolley wheel: 250 mm, Specification: Universal

Divider, Wheels, Chucks, Divider Discs, Points, High: 1.500 mm, Long: 1.400 mm, Width: 1.170 mm, Weight: 600 kg, Voltage: 220/380 V, Ø tool: 200 mm, Total power: 1.5 HP, Wheel speed: 3,000 / 6,000 r.p.m., Grinding length: 450 mm, Ø max workpiece: 300 mm, Transversal stroke: 300 mm, Longitudinal stroke: 450 mm, Distance between points: 450 mm, Tilting the tool trolley: +/- 20º, Race car rolling (x axis): 450 mm, Vertical travel of trolley wheel: 250 mm, Specification: Universal

Straight guide, 3-jaw plate, change wheels / Straight guide, 3-jaw plate, gear change, High: 1100 mm, Long: 1800 mm, Width: 2300 mm, Module: 5, Weight: 5.000 Kg, Voltage: 220 / 380V, Ø table: 310 mm, Ø spindle: 78 mm, Total power: 3 Kw, Maxi. stroke: 75 mm, Ø max. gear: 500 mm, Cutting speed: 18, Ø hole table: 125 mm, Ø max. inside: 450 mm, Ø max. external carving: 500 mm, Number of strokes / min cutter: 45/424