outras máquinas e instalações usadas para venda

Inv. Num. : 5636 Type: LPB-7320 Producer: Tema Generated: 2001 Parameters: Service system: PLC Maximum glass size: 1 7 x 3 0 m Compressed air consumption: 150l/min Space in the oven: 500 mm Rated current: 21 kW Power supply: 380 V/60  ... mais informação

Inv. Num. : 6043 Type: PRETREATmaker IV Producer: SCHULZE Generated: 2020 Parameters: Printer accessories for digital textile printing  ... mais informação

Inv. Num. : 6409 Type: KDC-N24 R2T Producer: KISUN Generated: 2018 Parameters: Electrical connection: 240 V Power consumption: 21 kW Compressed air: 6 bar Length: 6120 mm Width: 1070 mm Height: 1370 mm Equipment: Loader Termo Air Dryer Uv Spare screen cylinder and doctor blade chamber Discharger format: 610 x 750 mm (B2) Minimum. Size: 297 x 420 mm (A3) Paint layer height: 6-14 microns Painted material thickness: 120-400 g/m2

Inv. Num. : 6410 Type: DBS-200RCS Producer: S.A.F. Created: 2012 Parameters: Machine dimensions: 11.5 x 5.15 x 3.86 m The line consists of: - Blasting chamber - Dust collector OP 9 - Blowgun - Exhaust fan - DONALDSON TORIT filter cartridges -Lift - Two-stage abrasive cleaner - Summary conveyor belt - Electric control panel with control panel - Compressor ALMIG BELT 37-8 - Automatic steam trap Bekomat 13 - Compressor BELT 4-37

Inv. Num. : 6181 Type: VIKOMT 1515-P-F Producer: WISTA Created: 2014 Parameters: Length: 1500 mm Width: 1500 mm Height: 800 mm Equipment: Pressure vessel (50l) Turntable Van  ... mais informação

Inv. Num. : 6021 Type: UKM 2004 DE-PL Producer: MAUTING Created: 2006 Parameters: Number of smoking trolleys: 4 pieces Rated current: 95 kW Size of the smoking trolley: 800x800 mm Doors on both sides Heating is provided by a register for heated water via gas/electric boiler or hot water The smoke generator is equipped with a smoke scrubber Wood chips are used to produce smoke (different varieties possible) The smokehouse is equipped with water and chemical distribution for the rehabilitation of the chamber and the periphery

Inv. Num. : 6295 Type: HX-360-W3/OT/LT+VT1/800x1150x650 Producer: KRAINTEK Generated: 2020 Parameters: Basket size: 470x850x310 mm Basket capacity: 70 kg Height: 3450 mm Depth: 8277 mm Length: 11640 mm Weight: 15000 kg  ... mais informação

Inv. Num. : 6296 Type: HX-360-W2/OT/LT+VT1/800x1150x650 Producer: KRAINTEK Generated: 2020 Parameters: Basket size: 470x850x310 mm Basket capacity: 70 kg Height: 3450 mm Depth: 8277 mm Length: 11640 mm Weight: 15000 kg  ... mais informação

Inv. Num. : 6294 Type: 2-50 Producer: OmniTrac Generated: 2018 Parameters: Linear range (diameter): 50 (100) m Minimum measuring distance: 0 mm Machine height: 430 mm Machine length: 198 mm Machine width: 198 mm Machine weight: 10.9 kg  ... mais informação

Inv. Num. : 6484 Type: UKZ-1/305 Producer: MAVET Generated: 2017 Parameters: Power consumption: 2.49 kW Number of robot axes: 6pcs Robot reach: 1420 mm Load capacity: 12 kg Weight: 428 kg Equipment: Robot Fanuc M-10iA/12  ... mais informação

Inv. Num. : 5461 Type: PMM 12 10 6 Producer: Leitz Created: 1999 Parameters: Axes X/Y/Z: 1200/1000/600 mm Maximum table load: 1200 kg Machine height: 3800 mm Machine length: 3500 mm Machine width: 2400 cm Machine weight: 6 t equipment: Technical documentation Automatic change of the measuring keyboard (7 positions - including various touches)

This is a used Kränzle high-pressure cleaner. The hot water is prepared electrically. It is installed stationary and is fully functional. It has a dosing unit for cleaning agents  ... mais informação

Cutting table for 36 NF stones. There is equipment for formats 1.4 and 2.1. The cutter only in use for 5 months  ... mais informação

SERAPID 12 T die cart built in Germany is an innovative vehicle of stable design, able to maximise production processes through the precise, safe and efficient lifting of dies or tools. All of this is due to an extremely efficient electric drive, reliable cylinders and rigid chain technology, which is an environmentally friendly alternative to traditional hydraulic systems. The SERAPID 12 tonnes die change cart also guarantees increased reach at maximum working speed, thanks to the capacious Hawker Perfect Plus batteries. The net weight of the machine is 5200 kg. Technical specifications of the SERAPID 12 T die lifting cart - maximum load capacity: 12000 kg - maximum lifting height: 2000 mm - minimum lifting height: 740 mm - lifting speed: 0-57 mm/s - travel speed: 2.7 km/h - chain stroke: 2500 mm - batteries: Hawker Perfect Plus - battery capacity: 48 V – 330 Ah - chain ty ...

SCHLEUNIGER WireTwister 3300 AD wire twisting machine built in 2016 in China offers unparalleled twisting performance, thanks to the use of high-quality components and high-tech solutions. The machine, designed for the production of twisted pair cables, is also very simple and convenient to use. The ends of the untwisted wires are simply loaded into the holders and the twisting head respectively. The SCHLEUNIGER wire twisting machine pulls the wire very accurately to the programmed position, after which the head twists the wires with programmable tension control. At the end of the process, the holders automatically eject the twisted pair into the integrated storing channel and the taker returns to its initial position. The SCHLEUNIGER WireTwister 3300 AD wire harness machine is brand new and originally packaged. The photos and video shown in the offer are for reference – they repres ...

ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...

WJATECH WJA D096P A MA screen printing conveyor dryer built in Poland in 2020 is dedicated to the advertising industry, where efficient drying of prints on fabrics or textiles is required. Fast achievement of the right temperature and a conveyor belt with a large working space make the WJATECH screen printing dryer the best solution in this field. Technical specifications of the WJATECH WJA D096P A MA screen printing conveyor dryer - HMI panel: WEINTEK - main switch - power: 64 kW - working pressure: 6 bar - power supply: 3×400 VAC; 50 Hz - dimensions (L x W x H): 4500 x 2200 x 1700 mm - weight of machine: 900 kg

BOVONE BISELLATRICE 471 glass beveling machine was manufactured in Italy in 2012. The machine designed to meet even the most diverse customer requirements, proves ideal for the precise machining of even the smallest glass sheets with a thickness of up to 25 mm. Made from the highest quality cast iron, the body of the glass bevelling machine guarantees high reliability, efficiency and stability during the working process. Flat and oblique glass edges are ground using 12 grinding wheels (including felt, diamond and peripheral grinding wheels), the configuration of which enables operation at very high working speeds. The total weight of the machine is 4400 kg. Technical specifications of the BOVONE BISELLATRICE 471 glass bevelling machine - maximum glass thickness: 25 mm - minimum glass thickness: 3 mm - minimum glass dimensions: 35×35 mm, 25×500 mm - number of spindles: 12 - work ...

ELMETHERM 27 x 4.4 m furnace for plastic pipes was manufactured in 1997 in France. The furnace is used in the process of heating and shaping single-layer plastic pipes with a maximum wall thickness of 3 mm and a diameter from 8 mm to 35 mm. The workpieces are preheated in the machine’s heating pipes and then vulcanised and shaped at 168°C. At the very end, the plastic pipes are moved to a special cooling tunnel, where they are cooled with air at 42.8°C. Automated heat treatment of large quantities of workpieces is possible due to the use of conveyors in the machine that transport the workpieces between the different stages of the process. All functions, such as switching on heating or cooling, are controlled via the SCHNEIDER MAGELIS HMI touch panel. The gas furnace for moulding PA plastic pipes weighs approximately 35000 kg. Technical data of the ELMETHERM 27 x 4.4 m industri ...

SCHLOTTER Galvanotechnik galvanising line, manufactured in 1994 in Austria, is designed for professional electrochemical treatment on various types of workpieces. During the treatment, a special coating is produced which protects the workpieces from mechanical damage and corrosion. The SCHLOETTER Galvanotechnik galvanising line, characterised by its high reliability and low operating costs, is equipped with a modern control system, which makes it possible to control the ventilation system and to adjust parameters such as process time in the galvanising baths and heater on/off times. The galvanising and phosphating line is fully complete and ready for operation. Equipment of the SCHLOTTER Galvanotechnik automatic galvanising plant - tumbler trolleys (6 sets) - trolleys for suspension system (5 sets) - centrifuges (2 pcs.) - rectifiers (3 pcs.) - workpiece dryer - ventilation s ...