espalhadores de cola usadas para venda

Description:  , Consisting as follows: Gluing unit Retesting group End trimming group Series: 160 Motor power: 0.75 kw Installed Power: 3.5kw Approx. Onsite Dimension. (l x w x h): 3,150 x 1,200 x 1,300 mm, weight approx.: 800 kg ... mais informação

Description: VIRUTEX EB 25 Unilateral edgebander Serial number 1872 For preglued edges Automatic feeding of the edge Total power installed 3.3 kW Workpiece thickness: min 11 mm - max. 65 mm Feeding speed 4.5 m/min Composition End trimming unit Edge trimming unit serial number: 1,872, Approx. Onsite Dimension. (l x w x h): 1,720 x 960 x 1,320 mm, weight approx.: 150 kg

Description: Serial Number: ,4661 For preglued edges Automatic feeding of the edge Total power 3.30 kw Worpiece thickness: min 11 mm - max. 65 mm Feed speed 4.50 m/min Snipping unit Rough trimming unit serial number: 4,661, Approx. Onsite Dimension. (l x w x h): 1,720 x 950 x 1,300 mm, weight approx.: 200 kg

Description: Serial Number: 4418 For preglued edges Automatic feeding of the edge Total power 3.30 kw Worpiece thickness: min 11 mm - max. 65 mm Feed speed 4.50 m/min Snipping unit Rough trimming unit  ,serial number: 4,418, Approx. Onsite Dimension. (l x w x h): 1,720 x 950 x 1,300 mm, weight approx.: 200 kg

Approx. Onsite Dimension. (l x w x h): 2,020 x 2,200 x 900 mm, weight approx.: 500 kg ... mais informação

Description: CEHISA EP-2 Manual edgebander Serial number 1770 Maximum gluing height: 60 mm Workpiece thickness from 10 mm up to 50 mm It does not have a shear to cut the edge ! Hot melt glueing unit Adjustable temperature from 50 to 300º Motor power: 0.25 HP Three-phase connection With wheels for easy transport  ,serial number: 1,770, Approx. Onsite Dimension. (l x w x h): 1,040 x 820 x 950 mm, weight approx.: 100 kg, Serial Number of Manufacturer: 1,770

Description: Serial Number: 00.230.017 Composed by  , Gluing unit Trimming unit , Profiling unit , Installed power: 3kwtotal power approx: 3 kW, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,950 x 1,600 mm, weight approx.: 405 kg ... mais informação

Description: Serial Number:  ,86 8503 Gluing unit Prensor unit de 3 rodillos , End trimming unit ,  ,0,3kw 12000 rpm Top and bottom triming unit power: 1,125kw 12000rpm tilting 45º Profiling unit Scraping unit , Buffing unit:  ,0,37 kw 1500 rpm serial number: 86 8503, Approx. Onsite Dimension. (l x w x h): 5,500 x 1,110 x 1,500 mm, weight approx.: 1,440 kg

Description: serial number: 1000017130 control: BIESSE  , max. glue thickness: 3 mm max. glue-on height: 65 mm max. thickness of roll material: 3 mm min. workpiece length: 100 mm min. workpiece width: 150 mm max. workpiece thickness: 90 mm max. feed rate: 25 m/min.  , comfortable looptec system BIESSE 2 glueing units in the row (exchange of color from panel) CNC set up off all machine from panel maximum thickness of panel: up to 90 mm Nordson system for PUR included (wtih conecton to one gluing unit) airforce system change of glue + tape based on the barcode CNC grooving unit  , please also have a look at the video and the PDF documents of this machine serial number: 1,000,017,130, workpiece thickness: 90 mm, feed: 25 m/min, control: BIESSE, Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 2,000 mm, weight approx.: 12,000 kg

Description: machine number: 0-261-20-8279 workpiece thickness: 8 - 50 mm edge material thickness: 0,4 - 3 mm feed speed: 11 m/min extraction diameter: 3x80/1x100 mm pneumatics: 6 bar  , please also have a look at the PDF document of this machine serial number: 0-261-20-8279, edge thickness: 3 mm, workpiece thickness: 8 - 50 mm, feed: 11 m/min, Approx. Onsite Dimension. (l x w x h): 4,153 x 1,525 x 2,182 mm, weight approx.: 1,300 kg

Description: supply voltage 3 x 400 (50 Hz) V standard installed power 11 kW, with the airmotion option 16 kW feeding table with air cushion 1050 x 400 mm milling group application group cutting group at the ends rounding group at the ends radia finishing group surface finishing group finishing group with brushes constructive characteristics, standard working dimensions: the minimum width of the processed part - 70 mm the minimum length of the processed part - 140 mm the minimum height of the processed part - 8 mm the maximum height of the processed part - 60 mm the thickness of the applicable PVC/ABS edge film - 0.4 - 3.0 mm applicable thickness of solid wood wand - 0.4 - 12.0 mm compressed air working pressure (min/max) >,7 / 12 bar compressed air system pressure >,8 bar internal diameter of compressed air installation connection: 13 / 1/2' mm for more details see 4-Tempora F800. ...

Description: for roll and strip material , with SIMATIC 55 line control. Machine processes the workpieces in forward and return motion, therefore only one person is required to operate it Workpiece height (max.) 50 mm Edge thickness (max.) 12 mm Operating hours 1,464 h Machine number 00191 Total machine length: 4750 mm or 5600 mm with attachable extension Machine depth: 750 mm with extendable 2nd support from 0 to 1450 mm. Working height: 850 mm. Machine height: 1350 mm, cover hood open 1900 mm. Feed speed approx. 18 m/min (unchangeable). Connection for suction: 3x 100 mm connection diameter. Compressed air connection: min. 7 bar max. 10 bar. Connection: 3 / 8'. Operating voltage: 3 / N / PE / 380 V / 50 Hz. Nominal power: 7 kW. Rated current: 20 A. Supply cable cross-section: 4 mm². Fuse to be connected upstream: 25 A. Workpiece data: Workpiece projection: 37 mm (+ edge thickness) ...

Description: serial number 209/1-506 series KAM15V3 ordernumber 15506565 control PPC 315 with Touchsreen feed rate: 10 - 18 m/min workpiece length: min. 160 mm workpiece width: min. 60 mm workpiece thickness: 8 - 60 mm edge thickness: 0.4 - 8 mm serial number: 209/1-506, workpiece thickness: 8 - 60 mm, feed: 10-18 m/min, control: PPC 315, Approx. Onsite Dimension. (l x w x h): 5,340 x 1,823 x 2,030 mm, weight approx.: 1,750 kg

Description: serial number: 6294 , edge thick: 0,4 - 3 mm edge thick with L-Tec: 0,7 – 3 mm min. panel lenght without rounding unit: 70 / 120 mm min. panel lenght with rounding unit: 95 mm installed power: 10 kW min. panel width without roundin unit: 95 mm min. panel width with roundin unit: 120/250 mm max panel thick with pre-milling Unit: 60 mm max panel thick with rounding unit: 60 mm max panel thick without pre-milling and rounding unit: 60 mm min panel thick: 10 mm working speed: 11 - 18 mt/1’ dust outlets: Nr. 02 Ø 150 mm pneumatic operating pressure: 6 ATM , supply 400 V, 3 phases, 50 Hz , current 9 A d please also have a look at the pdf files of this machineserial number: 6,294, edge thickness: 0.4-3 mm, workpiece thickness: 10 mm, feed: 11-18 m/min, control: BM PCS12, total power approx: 10 kW, Approx. Onsite Dimension. (l x w x h): 5,700 x 850 x 1,800 mm, we ...

Description: serial number edgebander: 0-200-96-0454 supply 400 Y/230 V, 3 phases, 50 Hz maximum operating full load current 40 A fuse 50 A control voltage 24 V serial number return system: 0-284-96-1370 , supply 400 Y/230 V, 3 phases, 50 Hz maximum operating full load current 3,3 A fuse 16 A control voltage 24 V ATTENTION: Part marked in red NOT included Please also have a look at the pdf files of this machine  ,serial number: 0-200-96-0454, Approx. Onsite Dimension. (l x w x h): 8,365 x 2,000 x 1,820 mm, weight approx.: 5,000 kg

Description: HOMAG KL 76/A20 Edge Bander (incomplete)Approx. Onsite Dimension. (l x w x h): 8,400 x 1,060 x 2,100 mm, weight approx.: 4,500 kg ... mais informação

Description: Serial number 18465, with gluing unit, 4 vacuum cups, mounted on steel plate, with swivel armApprox. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 3,500 mm, weight approx.: 500 kg ... mais informação

Description: serial number AH00003308 , variable track feed speed m/min 10 - 20 , panel thickness mm 8 - 60 , thickness of edges in strips mm 0,4 - 12 , thickness of rolled edges mm 0,4-3 , max. section of rolled edges mm² 135 , coil-holder plate diameter mm 780 , exceeding material to the panel thickness (5 mm with max 3 mm thick edge) mm 2+3 (5) , distance between two successive panels 10 m/min mm 500 , distance between two successive panels 20 m/min mm 650 , minimum panel length (100 mm min. width): with speed up to 18 m/min mm 140 with speed from 18.1 to 20 m/min mm 250 , min. length of edge in rolls mm 170 , min. length of edge in strips mm 250 , min. panel width (210 mm min. length) with panel thickness up to 40 mm mm 55 with panel thickness from 41 to 60 mm mm 80 with edge thickness over 3 mm mm 80 , opening for panel  ...

Description: - Hot gluing of pre-glued strips for finishing linear and shaped panels - Main motor 3.59 Kw -Protection against accidental burns - Height adjustable edge guide - Pre-tape rubber roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.4 - 2 mm - Min/max panel thickness 12/43 mm - Working speed: 7 m/minApprox. Onsite Dimension. (l x w x h): 2,000 x 670 x 1,260 mm, weight approx.: 485 kg

Description: Serial n°: 200.07.006.15 maximum adhesive thickness in 10 mm maximum panel thickness 60 mm maximum thickness of rolled material 3 mm minimum piece length 140 mm minimum workpiece width 70 mm maximum feed rate 12 m/min electric height adjustment pre-heating zone granular gluing system glue container below the food chain changeable glue tank suitable for PUR glue spraying system straightening unit End cutting unit 2 motors flush/radial/bevelling stations 1 Edge copying unit 1 motor scraping unit Edge scraper, Flat scraper polishing unit strip magazine synchronised aggregate NC axis(es) machine model from left to right machine length in 5.140 mm FORMAT 4 E-MOTION control Loading cost to be definedserial number: 200.07.006.15, edge thickness: 10 mm, workpiece thickness: 60 mm, feed: 12 m/min, control: FORMAT 4 E-MOTION, total power approx: 11 kW, Approx. Onsite Dimension. (l x  ...