239 DEMAG máquina utilizada para venda

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, crane remote control with cable -Cable length: 5.85 m -Connector: 24-pin -Dimensions: 850/400/H150 mm -Weight: 10.5 kg

Gear motor, electric motor -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Demag, electric chain hoist with chassis -Type: PK1N load capacity 250 kg -Main stroke: 4 m/min -Fine stroke: 2 m/min -Transport dimensions: 600/500/H230 mm -Weight: 23 kg

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm -Weight: 102 kg

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer-Motor DEMAG Type: ZBF80A8/2B020 -Manufacturer gearbox DEMAG Type: AMK20DD -Power: 0.13/0.50 kW -Speed: 45/131 rpm -Design: M0-30-1/16.4 -Hollow shaft diameter: toothed Ø 28/30 mm -Protection class: IP54 -Dimensions: 505/210/H220 mm -Weight: 42.3 kg

Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer-Motor DEMAG Type: KBF80A8/2 -Manufacturer-Gearbox DEMAG Type: AF04-M-0-1-25-1 -Power: 0.13/0.50 kW -Speed: 43.4/186.8 rpm -Design: hollow shaft -Hollow shaft diameter: toothed Ø 22/25 mm -Protection class: IP54 -Dimensions: 445/155/H270 mm -Weight: 22.4 kg

Electric motor, three-phase motor -Handover: in the current condition as seen -Brake: dismantled -Power: 1.8KW -Speed: 1375 rpm -Shaft: Ø 24 mm -Type: B5 -Protection class: IP 54 -Dimensions 360/200/H250 mm -Weight 19.5kg

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Demag, crane chassis -Beam width: up to 163 mm -Load capacity: 500 kg -Dimensions: see technical drawing in the photos -Dimensions: 250/243/H180 mm -Weight: 15 kg

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 9000 mm -Carrier: IPB 320, HEB 320 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Delivery/Price: complete -Weight: 970 kg/piece / 1940 kg total -Transport dimensions: 9130/600/H380 mm -Weight: 1940 kg/total

Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: Mannsmann Demag, electric chain hoist without chain and load hook -Type: PKV1-V1-F4 -Load capacity: 125/250 kg -Main lift: 8/4 m/min -Fine stroke: 2/1 m/min -Number: 2x chain hoist available -Price per piece -Dimensions: 230/200/H235 mm -Weight: 15 kg/pc.

Indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T girders, IPB steel girders -Steel beams: for bridge crane, length 2x 13400 mm / 2x 11000 mm / 2x 7970 mm -Carrier: IPB 340, HEB 340 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Shipping/Price: in pairs or complete -Weight: 1650/1360/950 kg/pc. / 7920 kg total

Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: Mannsmann Demag, electric chain hoist without chain and load hook -Type: PK1L -Load capacity: 125/250 kg -Main lift: 12/6 m/min -Fine stroke: m/min -Number: 1x chain hoist available -Price per piece -Dimensions: 230/200/H235 mm -Weight: 15kg

indoor crane, crane, crane runway, crane rails, steel girders, HEB steel girders, double-T-girders, IPB steel girders -Crane runway: for bridge crane, length 2x 13400 mm / 2x 7980 mm -Carrier: IPB 280, HEB 280 -Crane rail: flat iron 50 x 30 mm -Dimensions: see photos -Distribution/Price: in pairs or complete -Weight: 1270/720 kg/piece / 3980 kg total

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 705 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Price: per piece -Number: 5x available -Dimensions: 290/170/H205 mm -Weight: 13 kg

Grua de largura da via: 9,50m largura (sem buffer de paragem); 3,77m Largura da laga do gato: 1,40m Capacidade de elevação: 10to segundo o gancho Desmontada

This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details.

This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details.

This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.

Offered is a Demag single-girder light crane system in portal design. Crane runway length: 10000mm, span: 8500mm, 1x crane girder incl. 2x crane travel units, hook travel: 5.0m, hoist: Demag electric chain hoist type 620S/DC-Com, load capacity: 1000kg, complete steel structure 6 columns incl. base plates, 2 crane runways, 1 crane girder. Inspection possible by arrangement.

2 x máquinas de moldagem por injeção EL - EXIS 200 S incluindo célula robótica Wittmann para remoção e alimentação (sem IML) EL - EXIS 300 S incluindo célula robótica Wittmann para remoção e empilhamento (sem IML)

Key data: 3500 mm, 810 , 60

Diâmetro do parafuso: 60 mm Peso de injeção em poliestireno: 810 g Força de aperto: 3500 kN Diâmetro do parafuso: 60 mm Curso de curso: 891 cm³ Peso de injeção em poliestireno: 810 g/hp Pressão de injeção: 2.420 bar Força de aperto: 350 t Lâmpadas Espaçamento das barras de ligação H x V: 720 x 720 mm Altura de instalação da ferramenta - min.: 350 mm Distância de abertura: 730 mm Controlo do microprocessador: NC5 Texto do ecrã: alemão Instruções de operação: Interface alemã FHK para robôs: Euromap 67 Tração do núcleo: 2 x Sem tolva de material / Sem bateria de água: -/- Potência do acionamento da bomba: 55 kW Carga total ligada: 78,1 kW Peso total: 17.300 kg Tamanho total: 7,4 x 2,0 x 2,4 m Condições de pagamento: 100 % antes de assumir a máquina, apenas líquido

Key data: 4200 mm, 1090 , 70

Diâmetro do parafuso: 70 mm Peso de injeção em poliestireno: 1090 g Força de fixação: 4200 kN Diâmetro do parafuso: 70 mm Curso de curso: 1212 cm³ Peso de injeção em poliestireno: 1090 g/hp Pressão de injeção: 1.877 bar Força de aperto: 420 t Luzes Espaçamento das barras de ligação H x V: 810 x 710 mm Altura de instalação da ferramenta - mínimo: 380 mm Distância de abertura: 710 mm Controlo do microprocessador: NC4 Texto do ecrã: alemão Instruções de funcionamento: Interface alemã FHK para robôs: Euromap 67 Puxão do núcleo: 2 x Sem tolva de material / Sem bateria de água: -/- Potência da propulsão da bomba: 45 kW Carga total conectada: 82,4 kW Peso total: 20.000 kg Tamanho total: 7,9 x 2,3 x 2,5 m Condições de pagamento: 100 % antes de assumir a máquina, apenas líquido

This DEMAG Systec 210/580-840 was manufactured in 2019. Its a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information.

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção com Robô Fabricante: DEMAG Tipo: Conceito ET60-200 Ano de Fabricação: 2003 Força de fixação: 60 toneladas Espaçamento dos longarinos 420 x 420 mm DN dos parafusos: 30 mm Deslocamento máximo: 106 cm³ Peso da peça moldada: 94 g/hp Controlo: NC5 Equipamento: Fabricante do robô: WITTMANN, tipo: W621-1381 Comboio de núcleo de 2 PCS

Key data: 2500 kN, 579 g/PS, 60 mm

1.0 St. Gebr. Máquina de Moldagem por Injeção com Robô Fabricante: DEMAG Tipo: Conceito ET250-840 Ano de Fabricação: 2004 Força de fixação: 250 toneladas Espaçamento das longarinas 630 x 630 mm Parafusos DN: 60 mm Deslocamento máximo: 636 cm³ Peso da peça moldada: 579 g/hp Controlo: NC5 Equipamento: Fabricante do robô: WITTMANN, tipo: W633-931 Comboio de núcleo de 2 PCS

Ref. no.: 17507 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

DADOS TÉCNICOS DA MÁQUINA Geral Força de fixação: 50 t Ano de fabrico: 2006 Controlo: NC4 Peso: 2.700 kg Dimensões (L × W × H): 3,8 × 1,1 × 2,1 m Unidade de injeção – .../200 Diâmetro do parafuso: 22 mm Volume de injeção: 41,8 cc Pressão específica de injeção: 2.800 bar Sistema de fecho – 50/... Força de fixação: 50 t Dimensões da placa da ferramenta: 520 × 520 mm Folga entre colunas: 355 × 355 mm Altura da ferramenta: 210 mm Distância de abertura: 400mm Distância máxima da placa: 610mm

Key data: 500 kN, 95 g/PS, 30 mm

Ano de Marca: 2005 Força de fixação: 50 toneladas. Deslocamento: 106 cm³ Diâmetro do parafuso: 30 mm com robô de remoção Bom estado de conservação