máquina de corte por láser BALLIU CF 1500/PS

máquinas para el procesado de metales / trabajo con chapas de metal
exigir más fotos
añadir a lista de favoritos
enviar consulta
vista de impresión
Número de artículo: 163521976 Cantidad: 1 Fecha: 10.05.2024
Año de fabricación: 2005
Precio: 53,000 EUR
Fabricante: Balliu
Modelo: CF 1500/PS
Tipo de máquina: máquina de corte por láser
Descripción: máquina de corte por láser Balliu CF 1500/PS

máquina usada

Type: CF 1500 / PS
Parameters: 18 mm, 1500 x 3000 mm
Manufacturer: Balliu
Year of production: 2005
Location: Czech Republic
Description: Laser BALLIU CF 1500 / PS, 3.5 kW, year 2005, in operation under power, possible inspection, regularly serviced.
It is a CO2 laser with linear motors and uses the SPAB Rofin Sinar laser resonator.
Advantages of this laser source:
Cheap traffic
Low demands on rare gases such as Helium and Argon
The machine only needs dehumidified frozen air to operate.
It still has its own Donaldson freezer and therefore does not need 5.0 nitrogen for operation.
Black sheets are cut with oxygen 4.0 and higher, stainless steel sheets with nitrogen 4.0 and higher.
It has a resonator of 3,500 W, which means that it cuts black sheet metal up to 18 mm and stainless steel up to 8 mm.
It has Siemens linear motors, so it hardly requires maintenance and does not wear out mechanically, it has no screws or combs.
The cost per hour of cutting was always around CZK 800 per hour of operation.
They were able to keep the machine themselves in operation, the resonator is a patented device and an authorized service was performed once a year.
The resonator is after GO, the replacement of the cathode, which develops the beam, so it should last about 6 years of operation
The machine is in operation, offer without E561673 transport and installation. The machine is a compact, welded frame poured with polymeric concrete, it can be transported on a jumbo height of 60 cm above the road.
Installation by a manufacturers technician takes a maximum of one week.
Technical parameters:
Sheet format: 3000 x 1500 mm
Laser power: 3500 W
Control system: Simens Sinumeric 840 D
Resonator power: Rofin Sinar 3,500 W
It burns black sheet metal up to 18 mm and stainless steel up to 8 mm
Siemens linear motors
Two interchangeable pallets
Machine weight: approx. 20 tons
seller offer No. resale P90813101
Seller-item-No.: P90813101

Pregunta

Distribuidor de la maquinaria?

Por favor remitir opcionalmente

Enviar la pregunta deseada?

(a todos los vendedores y compradores de dicha máquina)

¿Copia a usted?

(copia de su preguna será enviado a su dirección de correo electrónico)