Atlas 1602 Portapiezas de Repuesto Fabricante: Atlas Tipo: 1602 E 2 piezas en stock 1602 D y 1602 E Ubicación: 30900 Wedemark Venta privada como transportista de repuestos Precio: 2.900,-- euros Cucharas y agarres con coste adicional Incluyendo ayuda con la carga.

ID3853 Caterpillar 318D MH Año/Baujahr 2012 14.000 horas/horas Manipulador de materiales, cabina elevada, 4 estabilizadores, neumáticos de goma maciza, con acoplador rápido SMP, agarre de clasificación opcional Manipulador de materiales, cabina elevada, 4 balancines, neumáticos de goma maciza, acoplador rápido SMP, garfia opcional para clasificar

An articulated aerial work platform in need of repair is offered. Working height: 12200mm, platform height: 10300mm, horizontal outreach: 5590mm, platform capacity: 200kg, platform for 2 persons, transport length: approx. 5000mm, transport width: approx. 1470mm, transport height: approx. 2010mm, permissible gross weight: 1454kg. A hydraulic valve is defective, a replacement part is available but has not yet been installed, therefore the outriggers are currently secured with straps. An on-site inspection is possible.

Theodolite tripod, theodolite stand, measuring rack, support stand, mounting stand, steel stand -Tripod: for theodolite, solid construction, laterally adjustable -Height adjustable: 1005-1420 mm -Platform: 120 x 120 mm, mounting diameter 34.5/20 mm -Quantity: 1x tripod available -Transport dimensions: 720/600/H1285 mm -Weight: 101 kg

Theodolite tripod, theodolite stand, measuring rack, support stand, mounting stand, steel stand -Tripod: for theodolite, solid construction, laterally adjustable -Height adjustable: 1005-1420 mm -Platform: 125 x 125 mm, mounting diameter 34.5/20 mm -Number: 1 tripod available -Transport dimensions: 700/610/H1005 mm -Weight: 89 kg

An Airo scissor lift is offered. Working height: 12200mm, platform height: 10200mm, platform extension: 1500mm, load capacity: 450kg, drive: diesel, configuration: 4×4 with outriggers. Machine dimensions X/Y/Z: 2970mm/1700mm/2490mm, weight: approx. 3200kg. An on-site inspection is possible.

Existen dos máquinas diseñadas a medida para la producción automática de paneles de azulejos pre-rejuntados. Material de adhesión: lechada de PU de dos componentes, capacidad máxima de producción: aprox. 50 m²/h, formato mínimo de azulejo: 97mm/97mm, formato máximo de azulejo: 197mm/197mm, formato de placa divisora: 244mm/119mm. Esta es una línea de producción completa hasta la fase de envasado. Las tuberías de PU se han obstruido tras un largo periodo de tiempo y deben ser reemplazadas. Incluyendo varias piezas de repuesto. Documentación disponible. Es posible realizar una inspección in situ.

Excavators, track widening for excavators, wheel spacers -Manufacturer: Eurorubber, track widening for excavators -Part No.: ZR804550 -Material: Rubber -Dimensions: see photos / technical drawing -Suitable for various excavator models -Dimensions: Ø 820 x 65 mm -Weight: 31 kg

A Wacker Neuson wheel loader, ideally suited for agricultural purposes, is available. Engine: Deutz TD 2.9 L4 S5, Power: 61hp/45kW, Displacement: 2900cm³, Emission standard: Stage V, Exhaust aftertreatment: DOC/DPF, Max. engine speed: 2300rpm, Max. tipping load: 3300kg, Standard bucket capacity: 0.8m³, Max. working hydraulic pressure: 220bar, Max. travel hydraulic pressure: 450bar, Fuel tank: 82l, Kinematics: Z, Articulation angle: 44°, Oscillation angle: +/-12°, Max. dump height: 2430mm, Lifting force: 41.36kN, Outside turning radius: 3870mm, Tires: 405/70 R20. Transport dimensions X/Y/Z: approx. 4800mm/1850mm/2550mm, Operating weight: approx. 4600kg, Operating hours: approx. 1382h. Including 1200mm pallet forks, FEM II rotating fork positioner, road approval and hydraulic Z-HV quick coupler. The engine or the control system of the windshield washer system has a defect. Documentatio ...

Horas de funcionamiento: 4280h, Ancho de zapata de oruga: 550mm, Ancho de vía: 1520mm, Longitud de contacto de vía: 2090mm, Longitud del tren de aterrizaje: 2080mm, Ancho de pala: 3000mm, Dimensiones de la máquina X/Y/Z: aprox. 52050mm/1900mm/1850mm, Peso: aprox. 10000kg. Es posible realizar una inspección in situ.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10, 2 pieces -Tire size: 18 x 7 - 8 SC 10 RIM 4.33 R -Bolt circle: Ø 140 x 18 mm -Hub bore: Ø 111 mm -Price/Fee: complete -Dimensions: Ø 445 x 155 mm -Weight: 25 kg/piece

Theodolite tripod, theodolite stand, measuring rack, support stand, assembly stand, steel stand, welding table, assembly table, support stands, support feet, work stand, Vinten, heavy-duty tripod -Manufacturer: Spectra-Physics, tripod -Type: 950 -Stroke: 450 mm -Height: max. 2345 mm -Hole: Ø 89 mm -Transport dimensions: 2230/330/H220 mm -Weight: 14.4 kg

A combined sanitary container unit, consisting of two containers, presumably of the Czech make Moravia Containers or Containex, is available. Container exterior dimensions X/Y/Z: approx. 6060mm/2440mm/2840mm, interior height: 2500mm, protective primer: epoxy, insulation: mineral wool, floor traffic load: 2500N/m², exterior sheet metal thickness: 0.5mm, corrugation depth: 10mm, urinal: 6, cubicles: 6, washbasins: 5, electric heating convectors: 2, under-sink units: 5. The unit is designed for simple and quick disassembly and reassembly. The two containers must be separated during transport. Documentation available. An on-site inspection is possible.

ID3798 Wacker Neuson EZ80 Año/Año de construcción 2022 1530 horas/horas 8,4 t Pala, oruga de goma de 450 mm, tercer circuito de control, bomba de repostaje diésel, acoplador rápido hidráulico, 3 cubos Escudo, oruga de goma de 450 mm, tercer circuito de control, bomba de repostaje diésel, hidr. Acoplador rápido, 3 cubos

A hydraulic system, consisting of three identical power units and three identical hydraulic hammers including lines, is available. 1) 3x hydraulic power unit Atlas Copco LP 9-20 P, engine manufacturer: Honda, engine power: 6.7kW, fuel: gasoline, max. operating pressure: 150bar, return filter fineness: 25µm, machine dimensions X/Y/Z: approx. 650mm/550mm/650mm, weight: approx. 80kg. 2) 3x hydraulic, vibration-damped breakers Atlas Copco LH 190 E, year of manufacture: 2014, operating pressure range: 95bar-110bar, blow frequency: 1400/min, vibration value: approx. 5m/s², max. back pressure: 10bar, length: approx. 650mm, operating weight: 25kg. 3) Hydraulic hose lines. An on-site inspection is possible.

ID3774 MRS 8 cbm – Garra motorizada de dos proyectiles Año/Baujahr 1998 6,5 t 8 CBM Garra motorizada de dos carcasas con accionamiento electrohidráulico Garra tipo concha de motor de 8 cbm con transmisión electrohidráulica

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Type: 7.00-12 Rim 5.00 S-12 532/271 -Rim: for dual tires -Bolt circle: Ø 205 x 20 mm -Hub bore: Ø 160 mm -Price/Fee: complete -Dimensions each: Ø 580 x 280 mm -Weight: 56 kg/piece

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Type: 7.00-12 Rim 5.00 S-12 532/271 -Rim: Lemmers 6507 5.00S-12 -Bolt circle: Ø 205 x 22 mm -Hub bore: Ø 160 mm -Price/Fee: complete -Dimensions each: Ø 590 x 175 mm -Weight: 50 kg/piece

Control container, control cabinet -Control cabinet for tunnel boring -comes from the company Lemme Berlin -for bentonite pumps -Control panel -PLC control -Dimensions: 600/350/H1320 mm -Weight: 60 kg

Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device -Diameter: Ø 32 mm -Weight: 0.4 kg

centrifugal pump, acid pump, alkali pump -Motor power: 11 kW -Speed: 1440 rpm -Capacity: 40 m³/h -Pipe connection inlet: DN80 -Pipe connection outlet: DN80 -Dimensions: 1550/550/H550 mm -Weight: 240 kg

High-pressure standpipe -Pressure: maximum 30 bar -Predos is a special high-pressure stainless steel standpipe with a burst pressure of 70 bar. -Pressures of up to 30 bar may be required when clearing blocked drains. -High-pressure gauge -with lid lifter type: Hercules -in the suitcase -Dimensions: 1200/360/H200 mm -Weight: 16 kg

diamond core drilling machine -Drill stand -vacuum pump -Water pump reservoir -Core drill bits: Ø 15/20/3x 25/3x 28/32/40 mm

Vibration warning signal -Type: PA 100 -Quantity: 6 pieces -Price: per piece -Weight: 0.2 kg/piece

Barrier, barrier, security fence, fence system, barrier fence, shaft barrier-Barrier: Fence elements height 1060 mm 14 pieces-7x fence elements length 2100 mm-6x fence elements length 1700 mm-1x fence elements length 1300 mm-Price/Delivery: complete-Fence feet: can be supplied for an additional charge-Transport dimensions: 2100/1060/H520 mm-Weight: 284 kg

Pipe grab, round grab, laying clamp, round material grab, scissor grab -Pipe grabber: unfortunately without type designation -Pipe diameter: approx. 350 to 800 mm -Grip diameter: 2 adjustable ranges, see photos -Dimensions: 750/500/H1120 mm -Weight: 126 kg

tires, solid rubber tires, forklift tires-Manufacturer: Solideal, solid rubber tires 2 pieces-Tire size: 23x9-10 RIM 6.50F-10-Bolt circle: Ø 162 x 20 mm-Recess: Ø 110 mm-Price/Delivery: complete-Dimensions: Ø 465 x 200 mm/piece-Weight: 40 kg/piece

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs-Pipe grab: unfortunately without type designation-Pipe diameter: approx. 400 to 750 mm, see photos-Dimension: 930/470/H1140 mm-Own weight: 124 kg