fresadoras usadas para la venta (2,401)

Bezel, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 268 mm-Groove width: mm-Dimensions: see photo technical drawing-Dimensions: 285/85/H180 mm-Weight: 10.8 kg

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Different: sizes -Sale: only as a package -Weight: 0.8 kg

Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes.

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 260 mm-56 teeth: belt width approx. 85 mm-Receptacle: Taper clamping bushing: optibelt 3525-50 Ø 50 x 65 mm-Dimensions: Ø 255 x 100 mm-Weight: 22.6 kg

Reversible clamp, rotary table, rotary indexing table, rotary table, dividing head, dividing head, rotary indexing table -Model: HW 250 -1 can be clamped on both sides -Angle display -Clamping surface: Ø 250 mm -braked -Dimensions: 300/500/H300 mm -Own weight: 40 kg

Flat pulley, toothed pulley, multi-belt pulley, pulley, timing belt pulley-Manufacturer: Desch, timing belt pulley Ø 255 mm-Pitch: 14 mm / strap width 55 mm-Receptacle: Ø 40 x 50 mm taper bushing Desch 3020-40-Dimensions: Ø 255 x 70 mm-Weight: 16.3 kg

Universal milling angle head, milling angle head-Recording: MK4-Take drive: MK5-Angled head: swiveling-Dimensions: 440/300/H310 mm-Weight: 68 kg

Clamping plate with threaded hole and cross table, clamping angle, T-slot table, rotary table, milling machine table, upper support, top slide, dovetail guide, tool slide, cross table, cross support -Manufacturer: Santenberg, upper support tool slide from CNC machining center GTC S 2 -Drive shaft: Ø 20 x 45 mm -Dimensions: see photos -Dimensions: 720/550/H320 mm -Weight: approx. 194 kg

Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Cross support, cross support, cross table, cross slide table, cover plate-Manufacturer: Kunzmann, 2 cover plates from milling machine type UFV 600-Price / fee: complete-Dimensions: 263/161 / H38 mm-Weight: 9.7 kg

Cross support, cross support, cross table, cross slide table-Manufacturer: Kunzmann, top head from milling machine type UFV 600-Dimensions: 530/420 / H730 mm-Weight: 80 kg

Clamps, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamps-Clamps: fork clamps bevelled-Type: DIN 6315 B 40 x 400-Slot width: 40 mm-Dimensions: 405/100/H60 mm-Weight: 10.9 kg

Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Universal milling angle head, milling angle head -Take: SK 50 -Flange holder outside diameter: 380 mm -Mounting hole circle: 320 mm -Admission drive diameter: 60 mm -swiveling -Quill stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

toothed belt pulley, Slewing ring-Slewing ring: with toothed belt pulley-Slewing ring: Ø 520 mm-Pulley: Ø approx. 370 mm-Belt width: 80 mm-Sockets: bolt circle Ø 490 mm Ø 18 / M16-Measurements: see photos-Dimensions: Ø 520 x 200 mm-Weight: 79 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table-Table surface: 500 x 200 mm-4x T-slots: 14 mm-Clamping angle: rotatable, pivotable, tiltable-Foot recording: mm-Dimensions: 500/300/H210 mm-Weight: 50.5 kg

Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head-Manufacturer: TOS, universal milling angle head from milling machine TOS FB25-V-Recording output: SK50-Recording: input gear-Milling head: completely swiveling-Stroke: 55 mm-Rezes recording: mm-Pitch circle: mm-Transport dimensions: 780/490 / H430 mm-Weight: 224 kg

Copy head, copy head, copy device, copy lathe-Copy head for: lathe-with: hydraulic unit-Transport dimensions: 1200/800/H650 mm-Weight: 216 kg

Clutch gear, gear clutch, slip hub, slip clutch-Manufacturer: Mayr, ROBA slip hub slip clutch-Type: 3/100,210-Sprocket: Duplex 30 teeth-Dimensions: see photos-Total dimensions: Ø 158 x 70 mm-Weight: 4.4 kg

Copy head, copy head, copy device, copy lathe-heavy copy head for: lathe-without: hydraulic unit-Guide rails: 2-and additional equipment-Dimensions: 1100/170/H370 mm-Weight: 143 kg

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories-Execution:-Toothed like stairs-for use in pairs-individual pads can be used in conjunction with clamping arm No. 372000-Support height: 22 to 208 mm.-Material:-Tempered steel: painted.-Scope of delivery:-including 2x wooden boxes-Weight: 12 kg

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, accessories -Execution: -Step-like interlocking -for use in pairs -Individual pads can be used in conjunction with clamp no. 372000 - Support height: 30 to 200 mm -Tempered steel: painted -Weight:t 6 kg

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories-AMF: tension bracket-Thread size: M16-T-nuts: mm-Dimensions: 175/60/H300 mm-Weight: 2.6 kg

rotary table, rotary indexing table, controlled rotary table, rotary indexing table, rotary indexing table, indexing table, rotary table, compact rotary table-Manufacturer: Sopap, compact rotary table-Type: Ta 160-12-270-2-D-Clamping surface: Ø 240 mm, bolt circle Ø 200 mm / M12-Speed: 8 rpm / 12 intervals-Brake: 40 Nm-Individual components: see photos-Dimensions: 700/610/H390 mm-Weight: 212 kg

clamping device, clamping claws, deep clamping jaws, clamping base, clamping tool, step claws, low clamp, clamping iron, step block-Step block: clamping pad for clamping tool, 2 pieces-Clamping width: 50 mm-Price/Delivery: complete-Dimensions: 120/60/H140 mm-Weight: 1.9 kg/piece

Clamping table, clamping angle, T-slot table, rotary table, milling machine table-Clamping angle: for workpiece clamping-Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm-Dimensions: 300/160/H200 mm-Weight: 18 kg

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories-Manufacturer: AMF, stair trestle DIN 6318 2 pieces = 1 set-Type: AMF 230 DIN6318-Usage: in pairs-Clamping height: 192.5 - 230 mm.-Price: complete-Dimensions: 108/68/H230 mm-Weight: 3.3 kg/piece

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 141 mm-Dimensions: see photo technical drawing-Dimensions: 157/72/H108 mm-Weight: 1.8 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table-Clamping table: milling machine table-Table surface: 400 x 600 mm-T grooves: groove width 14 mm, groove spacing 50 mm-rotatable. by hand with 6x fastening screws-can be tilted and swivelled: via cranks-fits for Deckel Mikron WMW and other milling machines-Total dimensions: 700/600/H345 mm-Weight: 198 kg

Control Hurco MAX5 Velocidad [rpm] 10000 Viaje X/Y/Z [mm] 762/508/610 Recogida de herramientas SK 40 General: Control Hurco MAX5 Travel X/Y/Z 762/508/610 Velocidad: 10.000 rpm Huso: Tecnología de husillo de cinta Velocidad: 10.000 rpm Portaherramientas SK 40 Mesa de trabajo: Área de sujeción aprox. 1.020 x 510 mm Carga máxima de mesa: 1.335 kg Ranuras en T 18 mm Revista Tool: Revista Technology Drum Sujetador doble de cambiador de herramientas Número de estaciones: 24 piezas Diámetro máximo de la herramienta: 81 (120) mm Longitud de herramienta máx. 300 mm Equipamiento / Accesorios: Transportador de astillas para eliminación de astillas Planta de suministro de refrigerante IKZ Mesa rotatoria NC 4º eje (eje A) Medición de herramientas Sondas Renishaw Funcionamiento de configuración Volante electrónico