fresadoras usadas para la venta (2,417)

Está disponible una fresadora CNC Geiss de 5 ejes con encapsulado completo. Recorrido X/Y/Z: 2500 mm/2200 mm/760 mm, portaherramientas: ER25, potencia del husillo: 11kW, tipo de cabezal de fresado: cabezal de fresado ortogonal, control: línea de solución Siemens Sinumerik 840 Di. Documentación disponible. Es posible la inspección in situ.

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 190 mm-Type: 40-14M-55-Pitch: 14 mm / strap width approx. 55 mm-Receptacle: Taper clamping bushing: Tecnamic 2517-40 Ø 40 x 45 mm-Dimensions: Ø 190 x 70 mm-Weight: 8.7 kg

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 160 mm-Type: 34-14M-85- Pitch: 14 mm / belt width approx. 85 mm-Receptacle: Taper clamping bushing: optibelt 3525-40 Ø 40 x 65 mm-Dimensions: Ø 160 x 100 mm-Weight: 7.5 kg

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 101 mm-Dimensions: see photo technical drawing-Dimensions: 117/83/H140 mm-Weight: 1.8 kg

Dispone de dos fresadoras Steinel BZ20. Recorrido X/Y/Z: 560 mm/450 mm/450 mm, velocidad: 7000 rpm, alimentación: 10000 mm/min, portaherramientas: ISO30, posiciones de la herramienta: 40, diámetro de la mesa giratoria: 270 mm, rango de giro de la mesa giratoria: 0-24, peso máximo de la pieza de trabajo: 6 kg. Control: Siemens System 8, peso: aprox. 12000kg. Portador de repuestos.

Recorrido X/Y/Z: 1300 mm/1100 mm/1000 mm, dimensiones de la mesa X/Y: 800 mm/800 mm, número de paletas: 14, carga máxima de la mesa: 2200 kg, indexación de la mesa: 0,001. Velocidad: 7000 rpm, potencia del husillo: 50 hp, cargador de herramientas: 80, dimensiones X / Y / Z: aprox. 7000 mm / 3400 mm / 3800 mm, peso: aprox. 24000 kg. Es posible la inspección in situ.

Tube expander, spindle, splined shaft -Splined shaft: mounting shaft O 45 mm -Wedge: outer diameter 40/49/58 mm splined shaft cone adjustable -Dimensions: see techn. Drawing with the photos -Dimensions: O 98 x 370 mm -Weight: 5.5 kg

Recorrido X/Y/Z: 560 mm/320 mm/400 mm, velocidad: 3600 rpm, portaherramientas: SK40, potencia: 3kW, dimensiones de la mesa X/Y: 450 mm/950 mm, peso: aprox. 1650 kg. Incluyendo varios accesorios. Es posible la inspección in situ.

mechanically switchable clutch, releasable clutch, power clutch, clutch-Manufacturer: SEW-Eurodrive, motor/gearbox coupling housing with claw coupling-Use: for gear units SEW-Eurodrive type LP112 or similar-Claw coupling: KTR Rotex 38-Flange: Ø 250 mm bolt circle Ø 215 x 14 mm-Recess: Ø 180 mm, dimensions/individual components see photos-Dimensions: Ø 250 x 225 mm-Weight: 19 kg

Está disponible una fresadora de bancada central NC DPM (Digital Precision Machine) con control de defectos. Recorrido X/Y/Z: aprox. 800 mm/430 mm/600 mm, dimensiones de la mesa X/Y: 1270 mm/255 mm, montaje del husillo: R8/CAT40, velocidad: 5000 rpm, potencia del husillo: 2,2 kW, carga máxima de la mesa: 340 kg, desplazamiento rápido: 2,54 m/min. Dimensiones X/Y/Z: aprox. 2000 mm/2600 mm/2300 mm, peso: aprox. 2500 kg. Es posible la inspección in situ.

Various metalworking machines are available. 1) Johannsen T8E belt grinder, year of manufacture: 1979, table dimensions X/Y: 1900mm/800mm, machine dimensions X/Y/Z: approx. 3200mm/1000mm/1250mm, weight: approx. 530kg. 2) Milling machine BFM 30, year of construction: 1981, machine dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm, weight: approx. 360kg. 3) Böhme router, machine dimensions X/Y/Z: approx. 800mm/900mm/1550mm, weight: approx. 320kg. 4) Fleckstein router, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1250mm, weight: approx. 450kg. 5) Fleckstein horizontal milling machine, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1250mm, weight: approx. 450kg. On-site inspection is possible.

Longitud de la herramienta: 250 mm, peso máx. de la herramienta: 6 kg, control: Heidenhain CNC 234, carga conectada: 40 kVA, dimensiones de la máquina (LxWxH): 4700 mm/4100 mm/2300 mm, peso: aprox. 2,8 t, horas de funcionamiento: 43.408 h. El riel guía de la puerta de entrada está roto. Documentación disponible. Es posible una inspección in situ.

Eje X: 1600 mm, eje Y: 800 mm, eje Z: 800 mm, portaherramientas: ISO 50, velocidad: 20-4000/min, velocidad de avance: 1-4000 mm/min, recorrido rápido máx.: 10 m/min, número de posiciones de la herramienta: 36, diámetro máximo de la herramienta: 160/210 mm, longitud máxima de la herramienta: 315/400 mm, peso máximo de la herramienta: 15 kg, control: Heidenhain iTNC 530, carga conectada: 40 kVA, dimensiones de la máquina: 5080 mm/36xWxH Longitud de la herramienta: 315/400 mm, peso máximo de la herramienta: 15 kg, control: Heidenhain iTNC 530, carga conectada: 40 kVA, dimensiones de la máquina (LxWxH): 5080 mm/3650 mm/2005 mm, peso: aprox. 16 t, documentación disponible, retrofit completo 2015.

Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx.  ...

Travel X/Y/Z: 1100mm/560mm/510mm, rapid traverse X/Y/Z: 36m/36m/30m/min, table-spindle distance: 120mm-630mm, table dimensions X/Y: 1400mm/560mm, max. table load: 1000kg. Speed: 12000rpm, spindle power: 15kW, spindle mount: CAT40, tool positions: 30, machine dimensions X/Y/Z: approx. 3200mm/2750mm/2950mm, weight: approx. 5500kg, operating hours: 2049h, spindle hours: 716h, control: DMG Mori SLIMline with Siemens 840D SL. Including chip conveyor, oil mist separator preparation, direct path measuring systems X/Y/Z, measuring probe kit for Siemens control. Documentation available. On-site inspection is possible.

clamping rail, guide rail, support rail, stop rail-Mounting rail: with T-slot-Length: 1200 mm-Groove width: 15 mm, dimensions see photo technical drawing-Dimensions: 1200/80/H30 mm-Weight: 18.4 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Recorrido Z: 120 mm, rango de sujeción: 190 mm/160 mm, velocidad: 12000 rpm, conexión de aire comprimido: 6 bar.

Clamping table, clamping angle, milling machine table-Clamping angle: for workpiece clamping-Height: approx. 500mm-Number: 2x clamping angle available-Price per piece-Dimensions: 220/100/H500 mm-Weight: 12,8 kg/pc.

Clamping table, clamping angle, milling machine table-Clamping angle: for workpiece clamping-Height: approx. 500mm-Groove width: 22 mm-Dimensions: see photo techn. drawing-Number: 2x clamping angle available-Price per piece-Dimensions: 235/100/H500 mm-Weight: 8.9 kg/pc.

Recorrido: 1000 mm / 560 mm / 1100 mm, portaherramientas: ISO 50, carrera de la pluma: 125 mm, velocidad: 2000 rpm, avance: 3000 mm / min, recorrido rápido: 6 m / min, peso máximo de la pieza de trabajo: 800 kg. Dimensiones de la máquina X/Y/Z: aprox. 1020 mm/1700 mm/2650 mm, peso: aprox. 7100 kg, control CNC 432, horas de funcionamiento: 70771h. Documentación disponible.

Clamping rail, guide rail, support rail, stop rail, T-slot rail-Clamping rail: with T-slot on both sides-Length: 200 mm-Groove width: 10 mm, dimensions see photo technical drawing-Dimensions: 200/55/H32 mm-Weight: 1.9 kg

Toothed belt pulley, slewing ring,-Toothed belt pulley: with drive shaft-Pulley: Ø approx. 63 mm-Belt width: 15 mm-Shaft: Ø 19 x 19 mm / Ø 20 x 38 mm-Measurements: see photos-Dimensions: Ø 66 x 77 mm-Weight: 0.5 kg

Clamping rail, guide rail, support rail, stop rail, T-slot rail-Clamping rail: with T-slot on both sides-Length: 250 mm-Groove width: 14 mm, dimensions see photo technical drawing-Dimensions: 250/56/H41 mm-Weight: 2.4 kg

Slotting machine vice, vice for slotting machine -Span width: 110 mm -Jaws: 225 x 45 mm -Dimensions: 270/330/H155 mm -Weight: 20 kg/piece

Clamping claws, clamping devices, clamping elements, clamping irons, clamping devices, clamps, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps-Manufacturer: AMF, clamping claws, power clamps, movable-Type: 7500-25-Number: 2x tensioners available-Price per piece-Dimensions: 290/80/H450 mm-Weight: 3.0 kg/piece

Clamping iron, clamping device, clamping claws, deep clamping jaws, clamping pads, clamping tool, step claws, low clamps, clamping iron-Clamping bracket: fork clamps, various designs-Slot width: 15/18 mm see photos-Delivery/Price: complete-Dimensions: 150/42/H26 mm 2 pcs. / 200/50/30 mm 4 pcs. / 200/49/30 4 pcs.-Transport dimensions: 200/190/H105 mm-Weight: 12.8 kg

Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table-Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600-Motor: Siemens 380V 3.7/5.25 kW see photo nameplate-Speed: 1500/9000 rpm-Spindle head: SK40 mount-Dimensions: 1550/560/H735 mm-Weight: 555 kg

Transport pickups, crane pickups-Spare part: from a machining center manufactured by Sigma type Mission 5-Take: Ø 140 mm-Rezes recording: mm-Pitch circle: mm-Number: 4 pieces available-Price: complete-Dimensions:-Weight: 23 kg

Flat pulley, belt pulley, drive pulley, roller pulley-Pulley: flat pulley material cast aluminum Ø 290 mm-Width 200mm-Intake: Ø 60 x 120 mm-Bolt circle: Ø 80 mm M6-Dimensions: Ø 290 x 200 mm-Weight: 6.3 kg