máquinas de procesamiento de carne y pescado usadas para la venta (1,796)

The GEA Westfalia MZB10 continuous quark mixer is used within a quark line for continuous mixing of fat quark, fruit quark or spiced quark as well as for continuous dosing of cream. The two components to be mixed (quark and cream) are intensively mixed with the rotating mixing blades as they flow through the mixing head in the mixing cylinder. The mixture goes out of the unit by the outlet / drain pipe on top. The quark mixer is rotating at constant speed, produces a uniform cream quark of fine texture from the low-fat quark and cream which are fed to the mixer at constant rate. At regular intervals samples should be taken from the quark leaving the mixer.The mixing blade is attached directly to the motor shaft. A hermetically shaft seal, seals the mixing chamber from the motor compartment. The mixing head can be dismantled in just a few steps and easily cleaned without the need for spec ...

Butter-Homogenizer / Microfix, fationalizes the processing and packaging of cold store butter by reducing the time of defreezing (butter having a temperature of ±4 °C can be homogenized by the Microfix, homogenizing butter having lower temperatures depends on the consistency of the butter). Automatic adaption of the Microfix to the output of the combined packaging machine by means of a feeler switch is possible (not on the machine at this moment). Improving the quality of the butter by ensuring finest water dispersion resulting in an increased shelf life of the homogenized and packed butter. Likewise, the spreadability of the butter is improved. Reducing the loss of water during the packaging operation. The Microfix is adapted to the actual quality of butter by means of a variable feed worm drive, rotors having different numbers of knives (this machine is equiped with a stainless steel ...

Butter-Homogenizer / Microfix, fationalizes the processing and packaging of cold store butter by reducing the time of defreezing (butter having a temperature of ±4 °C can be homogenized by the Microfix, homogenizing butter having lower temperatures depends on the consistency of the butter). Automatic adaption of the Microfix to the output of the combined packaging machine by means of a feeler switch is possible (not on the machine at this moment). Improving the quality of the butter by ensuring finest water dispersion resulting in an increased shelf life of the homogenized and packed butter. Likewise, the spreadability of the butter is improved. Reducing the loss of water during the packaging operation. The Microfix is adapted to the actual quality of butter by means of a variable feed worm drive, rotors having different numbers of knives (this machine is equiped with a stainless steel ...

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-1000 L , Capacity: 1054 Litres , C ...

6 x Bowl Disks Available In stock for spare parts on a Cream Separator Tetra Pak HMRPX 518 HGV 74C ., These disks are unused and are availed immediately, Available: Immediately , Condition: Never Used

The 15 kW heating element in Tetra Pak systems is commonly used for heating liquids in processes such as pasteurization and sterilization. Here are some key details regarding this component:, Key Features of the 15 kW Heating Element:, - Power Rating: With a rating of 15 kW, this heating element is capable of providing significant thermal energy, making it suitable for processing large volumes of liquid quickly and efficiently., - Application: Primarily used in food and beverage processing, including pasteurizers, UHT (Ultra-High Temperature) systems, and other equipment where precise temperature control is crucial., - Material: Typically constructed from materials that are resistant to corrosion and can withstand high temperatures, ensuring durability and longevity in harsh processing conditions., - Heating Method: The heating element may employ methods such as conduction or convection  ...

The Alfa Laval Pump SK series, including the SK 472-132 S/4TF model, are positive displacement pumps known for their reliability and efficiency in handling various fluid applications. Here are some key aspects typically associated with these pumps:, - Design: The Love Pump SK series often features a robust design suited for heavy-duty applications. The pumps are typically made of high-quality materials to resist corrosion and wear, ensuring longevity., - Operation: These pumps operate based on a positive displacement mechanism, meaning they move fluids by trapping a fixed amount and forcing it into the discharge. This design allows for precise flow rates and consistent pressure., - Applications: Alfa Laval Love Pumps are commonly used in industries such as food and beverage, chemical processing, and pharmaceuticals. They are suitable for viscous and shear-sensitive products, making them  ...

Schröder Kombinator is a machine that heats and cools the product down instantly, through a scrape surface Heat Exchanger, this can be used on Margarine, mayonnaise, Biscuit Creams, etc. The machine has been serviced recently and has been working until October 2026. This includes the holding tube which is located on the top part of the machine . Its a 3 Product cylinder Type machine., Capacity: 3600-4800 Litre/Hour , Product cylinders: 3, Cooling Connection: Ammonia , Produces: Shortening or Puff Pastry Margarine, Mayonaise, etc. , Available: Immediately

Grote 713 Slicer Cortadora de acero inoxidable, adecuada para carne y queso, esta máquina realiza diversas aplicaciones de corte, incluyendo corte a granel, apilado y tejas en porciones, hasta 90 carreras por minuto por carril, salida de malla inoxidable, 1 pH

Used APV Rannie Blue Top 30/60 Homogenizer – Stainless Steel – 2-Stage, High-quality APV Rannie Blue Top” homogenizer, model 30/60, designed for reliable and efficient homogenization in dairy and food processing applications., This unit features a 2-stage homogenizing system, ensuring optimal particle size reduction and stable product consistency. The robust stainless steel construction makes it ideal for hygienic production environments., Technical details:, Manufacturer: APV Rannie, Model: Blue Top 30/60, Configuration: 2-stage homogenizing valve, Motor power: 15 / 18 kW, Plunger diameter: 30 mm, Connections: approx. 1 – 1.5, Material: Stainless steel, Performance:, Estimated capacity: approx. 1,500 – 2,000 L/h, Working pressure: up to approx. 150–250 bar, (depending on product and operating conditions), Model: Blue Top 30/60, Configuration: 2-stage homogenizing valve, Moto ...

The Nagema FBFC/1 is a heavy-duty, industrial Continuous Butter Making Machine (CBM) engineered for the commercial dairy sector. Manufactured by the historic German engineering brand Nagema, this machine processes bulk cream into high-quality butter via a fully continuous automated cycle., A detailed technical breakdown of the machines specifications and functional systems is outlined below., ---------------------------------------------------------------, Technical Specifications, - Production Capacity: Up to 2,500 kg/h of finished butter output., - Raw Material Suitability:Sweet / Cultured Cream: 45% to 50% fat content., - Sour Cream: 38% to 42% fat content., - Dimensions: Approx. 390 cm (Length) × 100 cm (Width) × 255 cm (Height)., - Total Machine Weight: Approx. 3,100 kg., - Main Drive Motor (Beater): 22 kW to 30 kW operating at 650 to 1,950 rpm (manually adjustable via an external ...

AI Overview, A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3], Core System Components & Description, Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters):, Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube., Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes., Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid ...

AI Overview, A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3], Core System Components & Description, Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters):, Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube., Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes., Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid ...

The Alfa Laval 518 separator is a type of centrifugal separator designed to separate liquids and solids based on their density. The height adjusting ring is an important component of this separator that plays a crucial role in the adjusting and controlling of the separation process., Key Features of the Height Adjusting Ring:, - Function: The ring allows for adjustments in the height of the separators bowl. This can impact the sedimentation rate and the efficiency of the separation process., - Applications: Used mainly in food processing, beverage production, and chemical industries for clarifying liquids or separating solids from liquids., - Material: Typically made from durable materials that can withstand the operational conditions of the separator, including corrosion resistance., - Installation and Adjustment: Proper installation and adjustment of the height adjusting ring are essen ...

Alfa Laval brazed heat exchangers are highly efficient thermal devices designed for transferring heat between two or more fluids without direct contact. Heres more information about them:, Key Features:, - Brazing Technology: The heat exchangers use brazing, a process of joining metals without melting them, resulting in strong and durable connections. This allows for compact designs and efficient heat transfer., - Compact Design: They have a small footprint compared to traditional shell-and-tube heat exchangers, making them ideal for applications with limited space., - High Thermal Efficiency: The design allows for excellent heat transfer performance, which can lead to reduced energy costs., - Durability and Longevity: The materials used are resistant to corrosion and wear, enabling the heat exchangers to withstand tough operational conditions., - Versatility: They can handle a variety o ...

Tumbler de vacío Stork JBT 2000L Tumbler de vacío de acero inoxidable, capacidad de 2000L, hacia adelante y hacia atrás, con controles de temporizador, 3 pH

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

Operating characteristics, o Feeding in closed pipe., o Outlet is guaranteed under pressure by 2 centripetal pumpsmade in AISI 304., o All material in contact with the product is made in stainless steel AISI 304 or higher., o The outflow system is completed with 2 pressure gauges in AISI 304 stainless steel and 2 micrometric valves to modulate the pressure of the lean and the concentration of the cream., o The sludge discharge is electronically controlled (through a hydrodynamic circuit) and takes place without interrupting the working process. The time interval between the single discharges can be programmed according to the characteristics of the product., o There is an automatic washing program at the end of the work in a closed cycle (CIP). Therefore, disassembly of the bowl is not required., Construction features and equipment, o Platform: fully made in stainless steel AISI 304 with ...

BENHIL 8380 Butter Filling and Wrapping machine for 250gr Current Format | IN STOCK Benhil 8380 Butter Filling and Wrapping Machine Machine Benhil 8380 Capacity up to 80 packets/min (4.800 p/h) Pack size 250 gram Dimensions 100mm x 75mm x 35mm Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW Condition ‘’as is’’ Good Condition (Complete), Price fully refurbished: Ask for Quote

The Ilpra FS 6000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request., Make: Ilpra , Model: FS 6000, Capacity: 4800, Year of Manufacture: 2003, Filling Volume: 50-500 ml per cup , Cup Dispenser: Automatic twin dispenser , Filling: Twin Filling Heads , Filling Specs: Fruits up to 1 cm pieces , Sealing: Twin Heat Sealing Station , ...

The TREPKO PKG 1 is equipped with a single stage of all station , the filling head are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Trepko cup fillers are mainly driven by a main motor converting the movement in an INDEX type gear box, signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request. The machine was used for filling Cheese in small rectangular cups, in regards of change overs to 71,75,80,95 mm OUTSIDE DIAMETER Cups we can offer this service in-house. Contact us for more information., Capacit ...

General Overview, Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle, transfer of heat to ingredients that are often heat sensitive and local h ...

NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts an ...

New Batch Pasteurisers custom made on request., Dairy Machinery UK offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Ceam Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume Capabilities (Litres): 200 , Control Panel: Stainless steel Control box,  ...

EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo ., Usage: Frozen Block cutter for butter and similar products, Electrics: 3~ / 400 v/50hz, Air: 6 bar -8bar

The EGLI 1700 Butter Churn is capable of a capacity of 900 litre of cream with a 60% butter output. The machine materials are stainless steel 316 L at contactable surfaces with the product. The gears and motors are covered with metal with a paint coating. The machine was used for very little after full refurbishment in 2022., New control panel for the start of the churn ., Butter Churn: EGLI, Volume: 1700L total capacity, Cream capacity: 850L, S.N: DM1700UK, Condition: Refurbished , Available: immediately, Location: In stock

Milk E-Heating System PHE, Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump., Make: DMUK, Capacity: 1000-1000 L/h, Temperatures: Regulated by the controls, Circulation Pump: Included, Control Panel: Included, VDF: Included, Condition: Excellent

The Trepko XPG 40 model is a Forming, Filling and wrapping machine for Aluminium foil or Parchment paper, this can be used to fill various products such as Butter, Margarine, Lard, Etc. The machine was fully refurbished in 2017 and it was never put in production now it’s with us in stock, we have made the full check over and is in perfect working order. The line consists also a Cintex Metal detector out feed conveyor ., Machine: Trepko XPG 40 , Capacity: up to 80 packets/min , Pack size: 100-300 grams, Dimensions: 100mm x 75mm x 35mm (250grams ) , Product: Butter, margarine, etc., Wrap material: Aluminium foil or parchment paper in reels, Product Feed: Hopper with Screws , Photocell: Foil Centering unit , Weight: 2.000 kg (gross), Machine Dimensions: Approx. 200 x 150 x 200 cm (l x w x h), Electricity: 2,2 kW

If you are looking for a reliable and quick response contact for your spare parts, at Dairy Machinery UK we offer a large variety of Spare Parts for the below manufactures. Keeping our ongoing assistance with our customers we have achieved best prices for genuine Spare Parts Directly From Manufactures ., Spare parts from these manufacturers, Alfa Laval Spare Parts, Tetra Pak Spare Parts, GEA Westfalia Spare Parts, GEA Tuchenhagen Spare Parts, GEA Hilge Spare Parts, GEA Niro Soavi Spare Parts, GEA Aseptomag Spare Parts, Fristam Spare Parts, Pentair Südmo Spare Parts, APV Gaulin Spare Parts, APV Rannie Spare Parts, SPX Spare Parts, Stephan Spare Parts, Karl Schnell Spare Parts, Benhil Spare Parts, Corrazza Spare Parts, Trepko Spare Parts, Ilpra Spare Parts, Grundfoss Spare Parts, Lowara Spare Parts, Arsopi Spare Parts, HST Spare Parts, Buschjost Spare Parts, Samson Spare Parts, Sumitomo S ...

The Tetra Pak TA 20 homogeniser is a type of machinery used in the food and beverage industry, primarily for the homogenization process of liquid products. Homogenization is a mechanical process that breaks down fat globules in liquid products to create a uniform and stable emulsion. This process is crucial in the production of products like milk, cream, and fruit juices, improving their texture, stability, and mouthfeel., Key Features of the Tetra Pak TA 20 Homogeniser:, - Design and Capacity: The TA 20 is designed for medium-scale production, capable of handling various flow rates depending on the application. It typically supports a wide range of products., - Versatility: This homogeniser can be used for a variety of dairy and non-dairy applications, including milk, cream, yogurt, beverages, and sauces., - High Efficiency: It offers efficient homogenization with adjustable pressure se ...