máquinas de soldar usadas para la venta (1,710)

table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de la mesa: - mmcarga de la mesa: 3000 kgrango de giro: 360 Gradrango de movimiento vertical: 1380 mmvelocidad de carrera: 1900 mm/min: 360 requisito de potencia total: 4 kWpeso de la máquina aprox.: 5400 kgdimensiones de la máquina aprox.: 3800 x 3700 x 4200 mm

: 0,6 t: -- mm: -- mmconsisting of:30x article no. 2-280510Quick release pin short- Clamping of 2 components- burnished- with twist lock8x article no. 2-280410.NUniversal stop 150 L - nitrided- nitrided- as standard with fine scaling on both sides4x article no. 2-280420.NUniversal stop 225 L - nitrided- nitrided- as standard with fine scaling on both sides8x article no. 2-280110.GStop and clamping angle 175 L - cast / black oxide finish- Hole / elongated hole- Cast / burnished2x article no. 2-280162.NStop and clamping angle 500 G - nitrided- Left stop- nitrided1x article no. 2-280166.NStop and clamping angle 750 G left - nitrided- Left stop- nitrided 1x article no. 2-280167.NStop and clamping angle 750 G right - nitrided- stop on the right- nitrided1x article no. 2-280910Tool trolley- painted- Permissible total weight 240 kg1x article no. 2-280164.NStop and clamping angle 500 G with turn ...

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kWvolume capacity: 20.000 m³/hweight: 1590 kgModular plug & play airtowerfor hall extraction of welding fumes with integrated, soundproofedFan, automatic, differential pressure controlledFilter cleaning, system control with color display, particle pre-separation andIFA - tested filter cartridges. The system is for a volume flow ofaverage 20,000 m³ / h designed1st filter stage - main filter:Filter area: 222 m²Number of filters: 6 piecesDust class according to DIN EN60335-2-69: M.Degree of separation:> 99.9%Cleaning: Jet - PulseCompressed air connection: NW 7.2 mm,4-6 bar, oil and water free2nd filter stage - fine dust filter.Filter area: 65 m²Filter class according to ISO 16890: ISOePM1 80%3rd filter stage -Synthetic fiber mats:Filter area: 8 m²Filter class according to ISO 16890: ISOcoarse 60%Total filter area: 295 m²Dimensions:Width  ...

table diameter: 900 mmtable load: 1 tswivelling range: 0-135 Gradexcentricity: 200 mmtable turning speeds: 0,12 - 1,2 U/minTorque: 2000 N/mtotal power requirement: 0,75 kWdimensions of the machine ca.: 1,5 x 1,020 x 0,9 mThe D-HB tilt and turn tables are very stable due to their heavy constructionand therefore particularly suitable for heavy and precisePositioning activities and circular welding work.Features:- Easy installation- Increase in production is made possible- Improvement of the welding quality through optimal positioning andCruise control- Reduction of crane hours and handling time, during which theImproved occupational safety.- Self-locking gear, therefore no leading and trailing behind with eccentricburden- Electronic components from Schneider, Siemens and Delta- Frequency-controlled stepless speed of the turntable- High stability due to the robust construction- CE certifica ...

length: 850 mmheight: 1050 mmtotal power requirement: 18,4 kWweight of the machine ca.: 200 kgdimensions of the machine ca.: 850 x 450 x 1050 mmYear of construction 2020 demonstration machine, as newEasy ARC 01.02 FD-B6 Welbee P500L welding robot stationMIG / MAG / water-cooled / torch RTW5000H / welding robot type FD-B6with welding table 2000x1200mmHole diameter 28 mmThe mobile welding cell for the craft businessSetting range MIG / MAG 20 - 500 ASteplessly adjustable switching levelsDuty cycle at max.current 40 ° C 50%Current at 100% ED 40 ° C 410 AWire feed speed 0 - 22 m / min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacidad de corriente: - kVAgarganta: - mmcapacidad de presión de contacto: - kprequisito de potencia total: - kWpeso de la máquina ca.: - tdimensiones de la máquina ca.: - mNo. 1244máquina de soldadura por puntos de portal CNC PEI PROG-2515Área de trabajo: 2500 x 1500ControlSiemens Capacidad de soldadura de la soldadora por puntos a tope 3 + 3 mmCapacidad de soldadura de la pistola 2 + 2 mmVelocidades de alimentación: X+Y 800 mm/seg, Z: 400 mm/seg, A 120/seg.

: 1860 m³/h: Pressung 2.900 Pa: 1,1 kWfilter surface area: 10 m²: 72 dB(A): 400/50 V/Hz: 665 x 1100 x 1495 mm: 200 kg- Hose arm 3 m, joints inside- Filter cartridge: dust class M- Pre-filter: baffle plate- Current type: 3Ph+N+PEThe filter system---------------------------------------The mobile filter system of the Cartmaster IFA type is thanks to the automaticCleaning particularly suitable for welding work with unalloyed andalloyed steels, galvanized material and aluminum with heavy smoke development.It corresponds to the safety requirements for devicesWelding fume class W3 (high-alloy steels with alloy components > 30%Nickel-based alloy).If used as intended, the system can be used for theRecirculation mode used because the requirements for theExceptions according to TRGS 560 are fulfilled. That specialdeveloped, dirt-dependent cleaning system ensures a goodcleaning behavior of the fil ...

table diameter: 690 mmtable load: 500 kgswivelling range: 0 - 90 Gradtable load: horizontal 500 Kgtable load: vertikal 250 Kgboring diameter: 100 mmtable turning speeds: 0,2 - 1,9 U/mintotal power requirement: 0,37 kWThe D-BYT N welding manipulator has a hollow shaft, also known asSpindle bore in the rotary table, which makes inert gas welding possible. theDue to the compact design, turn-tilt tables can be installed in anyintegrate existing production facilities. Inert gas welding (forming gas).thereby simplified.Features:- Double foot pedal (start-stop/left-right) included- The new welding table D-BYT-500N includes, in addition to the standard start/Stop foot pedal also an extra remote control (on the cable).- Infinitely adjustable rotation speed of the table- Suitable for any welding process, even high frequency- Very high stability - compact model- Through hole in the turntable plate- ...

current capacity: - kVAthroat: - mmcontact pressure capacity: - kpRated power ( 50% ED ) : 50 kVAContinuous power : 35.4 kVAMaximum short circuit power : 163 kVAHigh welding power : 130 kVAArm distance min. / max. : 60 / 230 mmElectrode arm Ø : 45 mmElectrode holder Ø : 25 mmOutreach : 610 mmMachine weight: approx. 285 kgDimensions : 1200 x 700 x 1450 mmincl. foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 913 kg280030.XD7D- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 – 27 mm- Sidewall made of high quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Holes surface in diagonal grid- Rounded corners, edges and holes- Side panel height 200 mm- Holes in the side wall in the diagonal grid- Including scaling on the surface- Structure reinforced with ribs- Grid lines enable precise build-upsIncluding 4x feet basic equipment 650 item no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Número: 31 Posición: 22 mmCondición: Neu Peso: 43 kgConjunto 1 sistema de 33 piezas, 22 mm, compuesto por:Abrazaderas: 4 x 220610.1Abrazaderas 2 x 220630.1Perno: 12 x 220511Tope: 4 x 220410.NTope: 4 x 220420.NÁngulo: 2 x 220110.NÁngulo: 2 x 220152.NJuego de accesorios. 1 x 223999Precio más embalaje y transporte.

: 6 Metropeso de la máquina aprox.: 1 t

number: 96 Positionenweight: 600 kgcondition: neu : 28 mmSpecial set 96 pieces, 28mm system, consisting of:1x tool trolley30x quick release bolts with twist lock short, without O-rings8x universal stop 150 L - nitrided4x universal stop 225 L - nitrided8x stop and clamping angle 175 L - cast2x stop and clamping angle 500 G left - nitrided1x stop and clamping bracket 750 G left - nitrided1x stop and clamping bracket 750 G right - nitrided1x stop and clamping bracket 500 G left - nitrided1x stop and clamping bracket 500 G right - nitrided4x stop and clamping angle 300 G left - nitrided8x prism Ø60-135 ° burnished - with collarcomplete with screw collar and countersunk head16x professional screw clamps - nitrided6x Professional screw clamp 45 ° / 90 ° - nitrided4x universal stop 300 - nitrided1x accessory set consisting of:Eccentric, Allen key, brush, sharpening stone, Probe CleanBasic,  ...

table diameter: 1000 mmtable load: 1200 Kgswivelling range: 0 - 135 Gradturning speeds: 0,1 - 1,0 U/minheight adjustment: 1000 - 1450 mmmax. torque on the faceplate: 2000 Nmengine output: 0,75 / 0,55 kWwelding current: 500 Ampere- Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate.The D-HBE series comes as a standard version with a cable remote control and a footswitch.Welding power transmission for max.500Ampere.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 780 mmtable load: 1,0 tswivelling range: 0 - 135 Gradturning speeds: 0,15 - 1,5 U/mintable height adjustment: von 780 bis 1560 mmmax. torque on the faceplate: 1000 Nmwelding current: 500 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 33 Positionenweight: 52 kgcondition: neu : 28 mmSet 1: 33 pieces, 28mm system, consisting of:Clamps: 4 x 280610.NClamps: 2 x 280630.NPrism: 2 x 280648.1.NBolt: 12 x 160511Stop: 4 x 280410.NStop: 4 x 280420.NAngle: 2 x 160110.NAngle: 2 x 280152.NAccessory set. 1 x 283999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 150 tworkpiece diameter: 1000 - 6300 mmdrum diameter: 500 x 300 mmfeed: 100 - 1000 mm/mintotal power requirement: 8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 560 mmtable load: 0,3 tswivelling range: 0 - 90 Gradturning speeds: 0,25 - 4,0 U/min: 360 Nmwelding current: 500 Amperetotal power requirement: 0,4 / Hand kW• Self-locking gear, therefore no forward and backward at eccentric Load.• Electronic components from Schneider, Siemens and Delta.• Frequency-controlled stepless speed of the turntable.• High stability due to the robust construction.• welding power transmission• CE certificate.• Very good price / quality ratio.• The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: GoodAire 1800 output: 1.800 cbm/Stundeweight of the machine ca.: 200 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1400 mmtable load: 5 tswivelling range: 0 - 135 Gradturning speeds: 0,05- 0,5 U/mintable height adjustment: von 1100 bis 1950 mmmax. torque on the faceplate: 7000 Nmwelding current: 700 Ampereincluding remote control and welding current transmission.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

número: 37 Posición: 28 mmcondición: neu peso: 29 kgConjunto básico 1 37 piezas, sistema de 28 mm, compuesto por:Abrazaderas: 4 x 280604 Perno: 8 x 280511Tope: 6 x 280420.NÁngulo: 2 x 280110.GTornillo roscado 8 x 280543Tope 8 x 160415Juego de accesorios. 1 x 163999Precio más embalaje y transporte.

weight max.: 3000 kgworkpiece diameter: 20 - 1500 mmdrum diameter: 100 x 200 mmconnected load frequency: 230 Vtotal power requirement: 0,12 kWdimensions: 0,8 x 0,37 x 0,36 mspeed: 100 - 1000 mm/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 900 mmtable load: 3000 Kgweight of the machine ca.: 0,64 tdimensions: 2,4 x 1,2 x 0,9 mWelding table / hole table:Hole diameter: 28.3mmThe table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N(St 52/3)Plasma nitriding provides a hard surface layer.height adjustable from approx. 880 - 980mmBottom ribbed for reinforcement.including ground storageAccessories optional Surcharge for 25mm material thickness: 340, -EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 tworkpiece diameter: 100-2500 mmgear diameter: 250 mmgear width: 140 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,0 x 1,4 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 tworkpiece diameter: 100 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 10 tworkpiece diameter: 100 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 2 x 0,55 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 850 - 900 mmweight of the machine ca.: 0,65 tdimensions: 2,4 x 1,2 x 0,95 mWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side panels 165mmBottom ribbed for reinforcement.Incl. floor bearingAccessories optionalSurface evenness 0.2 - 0.4mm over 1000mm.- with drawer unit- Grid shelf- Heavy-duty castors steerableWelding accessories shown not included!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.