máquinas rectificadoras usadas para la venta (2,502)

Descripción general Perfilado CNC y rectificadora de herramientas y cortadores fabricada por KELCH, modelo PFS 30-CNC. Diseñado para el rectificado de precisión de herramientas de corte, perfiles y herramientas especiales. La máquina está equipada con ejes controlados por CNC, un husillo de rectificado de precisión y una cabeza de trabajo basculante para aplicaciones versátiles de rectificado. Detalles técnicos Fabricante: KELCH Modelo: PFS 30-CNC Tipo de máquina: perfil CNC y máquina de rectificado de herramientas y cortadora Ejes controlados por CNC Control: Bosch CNC Alpha con Bosch Alpha CRT Lecturas digitales: Heidenhain Panel de control fabricado por Präzisionstechnik GmbH Cabezal de trabajo basculante Husillo de rectificado de precisión Soporte de sujeción de precisión Gabinete del refrigerante Sistema de extracción de polvo/refrigerante Estado En condiciones indu ...

: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 €: 1 : 100 x 2.000 mm: 20 - 76,1 mm: 1 : 3 kW: 190 kgDEMO MACHINE / MINT CONDITIONThe lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table.Incl. 5 pcs. grinding belts, 1 pce. gr ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6352 €: 122.59 €: 150 x 2.000 mm: 20 - 114,3 mm: 1 : 1 : 4 kW: 270 kgThe AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options.The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine.The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe grinders ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 7733 €: 149.25 €: 1 : 150 x 2.000 mm: 20 - 114,3 mm: 1 : 1 : 4 kW: 270 kgThe new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second.The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options.The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of mate ...

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 €: 100 x 2.000 mm: 20 - 76,1 mm: 1 : 1 : 3 kW: 220 kgThe AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipp ...

grinding length: 300 mmgrinding width: 500 mmworkpiece height: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 750 mmgrinding length: 5400 mmcentre height: 375 mmmax. workpiece diameter: 750 mmworkpiece weight: 10000 kgtable - swivable +/-: - °grinding wheel size: 750/650 x 75 x 305 mmgrinding wheel turining speeds: 750 U/minturning speed range - workpiece: 14,5 - 86 U/minmain drive motor: 15 kWworkpiece drive: 7,5 kWfeeds - fine adjustment: 0,00635 - 0,0508 mm/mintotal power requirement: - kWweight of the machine ca.: 27 tdimensions of the machine ca.: 13,5 x 3,4 mRefurbished 2023 and equipped with:- DRO- Table swivable- 9 x steadies- Coolant/Filtration TankMachine has had over 85000,-€ of retrofit work in 2023 including:-- replacement of air bearing liners-- 7 x steadies fully overhauled-- Overhaul of top table & centre heights of workhead & tailstock-- New electrical wiring & cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-48649-141

grinding length: 450 mmgrinding width: 250 mmworkpiece height: 275 mmtable surface area: 550 x 200 mmdistance spindle center to table: max. 400 mmtable speeds: 0 - 30 m/mincross feed: 0 - 60 mm/Hubrapid traverse cross: 1,2 m/mingrinding wheel size: ø 250 x 30 x ø 51 mmgrinding spindle speed: 1400 / 2800 U/mintotal power requirement: 4 kWweight of the machine ca.: 1 tdimensions of machine L x W x H: 1,55 x 1,23 x 1,80 mAccessories: magnetic plate 450 x 200 mm, grinding wheel with flange, wheel trueing attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-48648-82

: neu : ca. 6 Monate ab Auftragse : Taiwan : 67070 €: 1267.62 €: 800 mm: 610 mm: 800 x 400 mm: 800 x 400 mm: 810 mm: 5 - 25 m/min: 0.74 kW: 10 kVA kW: 3540 mm: 2080 mm: 2100 mm: 2900 kg: 980 mm: 350 kg: 355 x 50 x 127 mm: 0,001 mm: 500 - 1.800 U/min: 3,75 kW: 1.1 kW10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing attachment table mounted ...

Auction-ID: A1-48648-84

Auction-ID: A1-48649-11

Auction-ID: A1-48649-32

Auction-ID: A1-48648-4

Auction-ID: A1-49001-53

Auction-ID: A1-49001-23

: neu : 050233 : Jänner 2027, Zwischenverk : Taiwan : 87870 €: 1660.74 €: 1015 mm: 600 mm: 1000 x 400 mm: 1000 x 400 mm: 670 kg: 1100 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 450 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2.000 1/min: 5,5 kW: 1.5 kW: 1.1 kW: 1.1 kW: 3630 mm: 2682 mm: 2200 mm: 4400 x 2300 x 2400 mm: 4800 kg: 423 kg: 670 kg: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatoroil mist collectorautom. dressing attachment table mounted with compensationfully enclosed splash guard protection of working area1 grinding wheel2 grindi ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 83670 €: 1581.36 €: 810 mm: 610 mm: 800 x 400 mm: 800 x 400 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 450 mm: 0 - 675 mm/min: 480 mm: 500 - 2200 1/min: 3,75 (optional 5,5 / 7,5) kW: 1.5 kW: 3250 mm: 3075 mm: 2250 mm: 2900 kg: 175 kg: 350 kg: 355 x 50 x 127 mm: 1,1 kWFully enclosed splash guard10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listautomatic vertical feedservo drive for grinding wheel feed and table cross feedheavy duty spindle with 2 sets (4) of class P4 super precision angular contact ball bearingshardened and gr ...

Auction-ID: A7-49701-15

BAHMÜLLER - ISA 12 Número de stock 1039-9288 Tipo de máquina: Máquina de moler interna País de origen: Alemania Información adicional - Nuevo sistema de control (julio de 2015) Detalles técnicos Diámetro interior mínimo / máximo: 10 / 250 mm Profundidad de molienda 400 mm Diámetro exterior máximo 380 mm Diámetro de giro 390 mm Tabla: Recorrido de la mesa máximo 550 mm Carrera de la mesa mínima de 2 mm Travesía rápida 10 m/min Velocidad de la tabla - variable infinitamente - 0 - 10 m/min Ajuste grueso 18 mm Ajuste fino 4 mm Peso máximo de la pieza de trabajo 100 kg Husillo de la pieza de trabajo: Cabeza de husillo B 6 DIN 55021 Velocidades del husillo: infinitamente variables: 15 - 1.500 rpm Ángulo de giro máximo. +/- 30 grados Diámetro del husillo 50 mm Potencia de transmisión 2 kW Desgaste interno: Travesía rápida 0 - 250 mm/min Carrera 70 mm Potencia ...

Auction-ID: A1-49001-78

Auction-ID: A1-41279-392

Auction-ID: A1-49001-29

Auction-ID: A1-47358-160

Auction-ID: A1-41279-396

Auction-ID: A7-49701-16

GREIF - DHL K-0 Detalles de la oferta Número de stock 1039-9256 Tipo de máquina: Máquina de rectificar acero Fabricante: GREIF Tipo DHL K-0 Año de fabricación 1997 Control Ubicación de almacenamiento D-59302 Oelde País de origen: Alemania Tiempo de entrega por acuerdo Base de mercancías desde la ubicación Información adicional Máquina de rectificar acero GREIF - DHL K-0 Detalles técnicos Velocidad: 3.000 rpm Diámetro de la muela de rectificado 150 mm Tamaño de la mesa: 380 x 220 mm Tragaperras en T 1x Conexión 3~220 / 380 V Potencia total requerida 0,37 kW Peso de la máquina aprox. 150 kg Requisito de espacio aprox. 0,7 x 0,6 x 1,25 m Auction-ID: A7-49608-13

Máquina manual de rectificado de superficies Chevalier FSG-618M con mandrilla/mesa magnética y sistema de refrigerante visibles. En condiciones de uso, adecuadas para trabajos de rectificado de precisión tras inspección. Auction-ID: A1-49190-46

Auction-ID: A1-49001-11