82 FLOTT maquina usada para la venta

Taladradora de columna FLOTT tipo 16 STG/R2 Husillo: CM2 Salida del husillo: 100 mm Velocidad del husillo: de 80 a 2000 RPM Tamaño de la mesa: Largo 340 mm x Ancho 280 mm Maxi distancia husillo nariz/mesa (mesa inferior): 400 mm Profundidad de garganta: 240 mm Motor de 2 velocidades 2,2 kW Función de taladrado/roscado Ajuste por variador de correa La velocidad electrónica de RPM no funciona Voltaje: 380 V Ancho: 500 mm Profundidad800 mm Altura total: 1100 mm Peso: aprox. 150 kg

Máquina perforadora de banco de trabajo FLOTT TB 6/I, II, III Husillo de una pieza - cono macho B12 Salida manual del husillo: 65 mm Velocidad: de 450 a 9000 RPM Profundidad de la garganta: 160 mm Mini altura en posición baja: 60 mm Altura máxima en posición de altura: 180 mm Rotación de la cabeza alrededor de la columna Voltaje: 380 V Ancho: 300 mm Profundidad: 600 mm Altura total: 700 mm Peso: aprox 70 kg

La columna de taladro FLOTT SB 25 STV fue construida en 1991 en Alemania por Arnz Flott GmbH Werkzeugmaschinen. Esta máquina extremadamente eficiente permite perforar agujeros precisos con un diámetro máximo de 25 mm en acero y un diámetro máximo de 30 mm en hierro fundido. El proceso de mecanizado se realiza mediante una cabeza de trabajo con un husillo fiable, que gira a una velocidad máxima de 2000 rpm. Hasta 6 etapas de ajuste de velocidad del husillo permiten ajustar con precisión los parámetros según el tipo de pieza de trabajo. La mesa de trabajo, a su vez, tiene ajuste de altura y puede girarse completamente alrededor de la columna. Todo esto convierte la taladro de pilar FLOTT SB 25 en la solución perfecta para plantas de producción y talleres. El peso total de la máquina es de aproximadamente 300 kg. Especificaciones técnicas de la máquina de perforación FLOTT ...

: neu : ca. 2 Wochen ab Auftragse : 571.15 € : 120 mm : 40 mm : 200 mm : 33 kg [felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper. The machine vice for freely adjustable clamping of the workpiece. Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted. Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpieces Hardened and precision ground clamping jaws No additional clamping devices necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 4852.45 € : 250 x 40 x 51 mm : 1300 x 75 mm : 1,4 kW : 1400 1/min : 15 m/s : 42 mm : 600 mm : 540 mm : 1190 mm : 1200 x 800 x 1000 mm : 70 kg With base frame, integrated suction and brake High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug ALTERNATIVES: Version without suction (Art. 330.365) Version without stand, suction and brake (Art. 330.360) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 050141 : prompt, Zwischenverkauf v : Polen : 2821.24 € : 1 : 200 x 32 x 32 mm : 1 kW : 2800 1/min : 42 mm : 470 mm : 250 mm : 1050 mm : 60 kg Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVES: Version without suction (Art. 317.762) Version without stand, suction and brake/emergancy push button (Art. 317.774) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : .00772 : prompt, Zwischenverkauf v : 341.12 €: 1 : 80 mm: 28 mm: 12 kg Vice [felix] 2.0 80 Mandril de taladro de acción rápida B16 1-13 mm (precisión 0,17 mm) Mandril cónico B16/MK IIReducador manguito MK ii/mk IT Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : 880.52 € : 150 mm : 40 mm : 200 mm : 33 kg [felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper. The machine vice for freely adjustable clamping of the workpiece. Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted. Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpieces Hardened and precision ground clamping jaws No additional clamping devices necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 030140 : prompt, Zwischenverkauf v : Deutschland : 13429.36 € : 257.84 € : 1 : 30 mm : MK 3 : 280 mm : Stufe 1: 125 - 4000, Stuf U/min : 0,9 / 1,45 kW kW : M20 : 820 mm : 520 mm : 1900 mm : 320 kg : 0 - 300 mm/U : 240 - 790 mm : 420 x 340 mm : 125 mm Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off, programma ...

: neu : ca. 2 - 4 Wochen ab Auftr : 4533.22 € : 300 x 40 x 51 mm : 2,2 kW : 1250 1/min : 42 mm : 540 mm : 530 mm : 1180 mm : 800 x 600 x 1400 mm : 90 kg With machine stand, integrated suction, emergency stop pushbutton and brake (Art.317.779) Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine ALTERNATIVE: Version without suction (Art. 317.776) Version without stand, suction and brake/emergancy push button (Art. 317.764) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 00774 : prompt, Zwischenverkauf v : Deutschland : 523.41 €: 1 : 100 mm: 32 mm: 12 kg Vice [felix] 2.0 100 Mandril de perforación de acción rápida B18 3-16 mm (precisión 0,17 mm) Mandril cónico B18/MK IIReducar manga MK ii/mk IT Los datos para este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

: neu : 2025 : .00775 : prompt, Zwischenverkauf v : 949.81 €: 1 : 150 mm: 40 mm: 33 kg Vís [felix] 2.0 150 Mandril de perforación de acción rápida B18 3-16 mm (precisión 0,17 mm) Mandril cónico B18/MK IVRuíto manguito Mk iii/mk IIRugua de aprendizaje MK iii/mk ITlos datos para este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

Taper MK: 2 : JA Peso de la máquina aprox.: 200 kg Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Taper MK: 1 diámetro de diámetro en acero (diámetro): - mmweight de la máquina aprox.: 140 KG Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: 95 mm Short spindle: MK 2 spindle turning speed range: 100 - 4200 UpM throat: 200 mm feed: von Hand weight of the machine ca.: 81 kg Overall size: 650x300x850 mm Standard equipment: - Number of speed ranges 10 steps - Movable LED machine light - Swivel work table +/- 45 degrees - Mains cable and plug ready for immediate use - Drilling table adjustable via gear rack - Depth stop with scale - Emergency stop - In accordance with current CE conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad de diámetro en acero (diámetro): 18 / 23 mm de profundidad: 100 mm, garganta: 240 mm. Velocidad del husillo: 250 - 4000 U/min. Superficie de la tabla: 340 x 280 mm. Peso aprox. de la máquina: 205 kg. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

bore capacity in steel (diameter): . mm throat: . mm bore stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): . mm throat: . mm bore stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): . mm throat: . mm bore stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Taladradora y roscadora de mesa FLOTT Tipo TBZ 15 GLFabr. Nº 32177027 año de construcción 1986Capacidad de taladrado 15 mmMontaje del husillo MK2Profundidad de garganta 195 mmCarrera del pino 80 mmTamaño de la mesa 275 x 200 mmDiámetro de la columna 70 mmVelocidad del husillo 80 - 4500 rpm. 18 pasosPotencia del motor 0,55 + 0,75 kWNet conexión 380 voltios, 50 Hz- 6 pasos de correa desde el motor y 2 etapas de correa hasta el husillo de perforación 2 velocidades del motor- 3 piezas de cartuchos guía de 0,7 mm + 0,8 mm y 28G disponibles- Ajuste de la altura del cabezal de perforación mediante manivela con cremallera en el

Flott Mk3

Drilling machine, drill press, pillar drill, column drill -Condition: Working -Note: Clamping table repair-welded, see pictures -Manufacturer: Flott, column drill type SB 15 -Spindle mount: MK2 -Motor: 0.525 kW -Speed adjustment: via V-belt -Speed speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm -Table size: 220 x 220 mm -Spindle holder: MK2 with drill chuck -Travel: 360 mm -Spindle stroke: 55 mm - Throat: 295 mm -Column Ø: 100 mm -Accessories: collecting tray for coolant -Dimensions: 930/700/H1805 mm -Weight: 190kg -Handover: in current condition as seen

Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, Pillar drill type 23 mm -Spindle mount: MK3 -Motor: 1.1 kW -Speed adjustment: via V-belt -Speeds: 200 - 2000 rpm -Table size: 300 x 300 mm -Travel distance: 440 mm -Spindle stroke: 145 mm -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 900/450/H1900 mm -Weight: 306 kg

Drilling machine, drill press, pillar drill, column drill -Manufacturer: Flott, column drill type SB 23 pieces -Speed speeds: 200 - 2000 rpm, continuously variable via variator disc -Table size: 300 x 300 mm, travel 595 mm -Spindle holder: MK3 with drill chuck -Spindle stroke: 150 mm -Throat: 295 mm -Column: Ø 110 mm -Dimensions: 920/450/H1920 mm -Weight: 345 kg

Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, pillar drill type SB 32 ST-FB suitable for flowdrill -Spindle mount: MK3 -Motor: 3.0 kW -Speed adjustment: stepless with digital display -Speeds: 80 - 4000 rpm -Table size: 500 x 360 mm -Travel distance: 450 mm -Spindle stroke: 160 mm with digital display -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 940/590/H1920 mm -Weight: 367 kg

Tapping machine, bench drilling machine -Spindle mount: B12 -Tap chuck: Tapmatic 30 X M1.5-M7 -Projection: 165 mm -Motor power: 0.25 kW -Weight: 60 kg

Soporte de husillo MK 3 Capacidad de perforación en acero: 23 mm