otras máquinas de alimentos usadas para la venta (987)

On behalf of our client, we are requested to offer this Cheddar Cheese Plant for sale, because of bankrupcy of the previous owner. The whole line is delivered and built up in 2021 and has been in production for 1,5 years only., The line is already dismantled and packed for transport. It can still be inspected on the actual factory site in the warehouse., The capacity of the cheddar cheese plant was during production of the previous owner set at a milk intake of 50.000 pounds per hour, 20 hours per day = 1.000.000 pounds of milk per day, which means ± 100.000 pounds of cheddar cheese per day (= ± 45.359 kg of Cheddar cheese per day) = ± 2.500 Cheddar cheese blocks of 40 pounds per day (= ± 18,14 kg). Dimensions of the cheddar blocks: 35 x 28 x height cm., The available list of equipment exist out of:, - 4x Closed cheesevats, Manufacturer: Walker (supplied by Kusel), Model: Double O, V ...

Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg

This APV Gaulin MC18-5TPS homogeniser is a 3-cylinder machine which is designed for maximum 5.500 liter per hour with a maximum pressure of 345 bar. This machine, based on the motor power and the piston diameter is set on 4.800 liter per hour with a maximum pressure of 345 bar. The homogensier is equipped with 2-stages, hydraulich controlled. Piston diameter 45 mm. Manometer. Motor: 55 kW - 380 V - 99 Amp - 50 Hz - 1.470 rpm, forced cooling on the motor (for running at lower capacities). Oil pumping system inside the machine. Stainless steel cladded., Additional features:, No typeshield on the machine, so unknown serial number and year of manufacturing. Model and capacity based on piston diameter and motor power., Excluding:, - Pulsation dempers, - Control panel, Type of Machine: Homogeniser, Capacity: 4.800 liter per hour, Stages: 2 stages, Max. Pressure: 345 bar, Valve cylinder: Poppet ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (18,5 kW), motor cover, cyclone, feet, water valves (original Westfalia), control panel (original Westfalia), all inlet/outlet pipes with flow indicators, all service tools for maintenance including pressing tool and a big set of spare parts. Instruction manual available., Additional features:, Excluding:, - Baseplate., Type of Machine: Cream Separator / Skimmer, Capacity: 12.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 18,5 kW - 380 V - 50 Hz - 1.465 rpm - 38 A , Dimensions: 185 x 150 x 147 cm, Weight: 2.020 kg

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capacity: 215 ltr/h, Pressure: 250 / 50 bar, Number of stages: 2, Motor: 2,2 kW - 400 V - 50 Hz - 1.420 rpm, Including all interconnect ...

5x discos para un separador / skimmer Alfa Laval 618., Tipo de máquina: Disco de cuenco, Número de piezas: 5x, Estado: Usado

Separador eliminador de bacterias (Bactofuge). Autolimpiante. La máquina viene con la cuba, el motor (22 kW), el ciclón de lodos, la placa base, los pies, la válvula CPM para la regulación de la presión, el panel de control (Alfa Laval original) y la caja de agua (Alfa Laval original)., Características adicionales: Excluyendo:, - Herramientas de servicio para el mantenimiento., Capacidad 10.000 - 15.000 litros por hora., Tipo de máquina: Bactofuge (centrífuga de eliminación de bacterias), Capacidad: 15.000 litros por hora, Velocidad de la cuba: 5.069 rpm, Motor: 22 kW

APV Crepaco Liquiverter / liquifier for dissolving and dispersing any dairy and food product. This unit is designed to mix, disperse, dissolve, suspend or hydrate solids and liquids or oils and fats with liquids. Volume of the tank: ± 750 liter. Motor (18,5 kW - 1.470 rpm) with motorcover on the top with direct connected 1:1 right-angle drive for controlling the high speed impellor in the bottom, which is creating a strong Vortex which reduces cycle times to a matter of minutes. Stainless steel construction with 4x legs. Round manhole on the top. 2x spray balls for CIP cleaning. Oufeed on the side with a manual butterfly valve. Inside dimensions: 95 x 95 x 80 cm. Stainless steel control panel with start/stop button and a Solcon RVS-AX reduced voltage starter., Type of Machine: Powder dissolver, Volume: ± 750 liter, Capacity: up to 15.000 ltr per hour, depending on product and system la ...

Bacterial removing separator (Bactofuge) with nozzles. Self cleaning. Machine comes with the bowl, motor (45 kW), motor cover, new base plate, feet, desludge cyclone, OWM watervalve and service tools for maintenance including pressing tool.  , This Bactofuge is already convertered to a rubber damped silent gear drive!, Additional features:, Excluding:, - Control panel., Type of Machine: Bactofuge (Bacterial-Removing Centrifuge), Capacity: 13.000 liter per hour, Bowl speed: 4.150 rpm, Motor: 45 kW - 1.465 rpm - 400 V - 50 Hz - 84,5 A, Weight: 2.700 kg, Dimensions: 165 x 135 x 190 cm

Serviced Continuous Butter Making Machine - CBM with a new control panel with simple controls. Output of 800 kg butter per hour sweet butter and 600 kg butter per hour cultured butter. Input of ± 1.600 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Churning motor: 15 kW. Screw conveyor (kneading) motor: 5 kW. Butter milk pump: 3 kW. Feed pump: 3 kW. Vacuum pump: 1,5 kW. New control panel with simple controls with cream inlet temperature indictator, wash water inlet temperature indicator, output temperature indicator, emergency stop, main switch and all on/off buttons for the pumps., Type of Machine: Continuous Butter Making Machine (CBM), Capacity: 600 - 800 kg butter per hour (output), Motors: Churning: 15 kW and Kneading: 5 kW - 415 V - 50 Hz, Year of Major Service: 2024, Operating Hours: 0 h s ...

Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseframe with feet, manometer on in / outlet, control panel (upgraded by Centrimax with Siemens S7 PLC and CE labelling) and several service tools for maintenance. It was working till the end of the production of the former dairy., Additional features:, Excluding:, - Water valves., - Sludge tank / cyclone., - Counter pressure valve., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.700 rpm, Motor: 37 kW

Separador de crema (Skimmer). Autolimpiante. La máquina viene con el tazón, el motor (11 kW), la placa base, los pies, el panel de control, las válvulas de agua, las tuberías de entrada y salida y las herramientas de servicio para el mantenimiento., Características adicionales:, Excluyendo:, - Cubierta del motor., Tipo de máquina: Separador de crema / Skimmer, Capacidad: 5.000 - 7.000 litros por hora, Velocidad del tazón: 6.520 rpm, Motor: 11 kW - 380 V - 50 Hz - 1460 rpm, Peso: ± 1.300 kg

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...

Gracias por su interés en nuestras máquinas, que podemos ofrecerle de la siguiente manera: Marca: Untroma Modelo : Klimat 090/12 Secador de condensación - Horno de secado Año de construcción : 2023 electr. Valores : 12 KW 400 V 50 Hz 3Ph Producto seco: hasta 120 kg/día Dimensiones de la máquina : aprox. 1300 x 940 x 2050 (largo x ancho x alto en mm) Detalles : Capacidad de llenado de hasta 150 kg dependiendo del grosor de corte y de la altura de la bandeja Secado hasta 45C en unas 24h Adecuado para frutas, verduras, pasta, carne, alimentación animal, productos técnicos Ofrecemos esta máquina a la venta "en condiciones existentes" bajo exclusión de cualquier reclamo o representación de garantía/defecto.

Vendemos aquí una sierra para huesos del fabricante Berkel, tipo BS 1750 RN en muy buen estado de uso y funcional. La máquina funciona con 400 voltios, 1,1 kW, idéntica a Mado MKB 649, completamente de acero inoxidable, mesa 55x50 cm, probada en taller, lista para usar de inmediato, dimensiones W/D/H 55/50/90 cm, otros bajo pedido.

Unificador de línea controlado por microproceso para la unificación automática de paquetes de varios carriles que salen de una máquina de embalaje. - Longitud del paquete ajustable hasta 550 mm de longitud del gatillo Precio original en 2007: 17.00,00 € - Número de líneas seleccionables de 1 a 6 pistas - Ajuste eléctrico de la profundidad de la herramienta -Métricas: ESV 03 = Longitud 1560 mm / Anchura 610 mm - Materiales inoxidables Los ensamblajes de bajo mantenimiento dan como resultado un sistema robusto y de alto rendimiento. Una función de espera garantiza que todas las cintas se detengan cuando no salgan más paquetes de la máquina de embalaje. Esto garantiza que todos los paquetes en el unificador de línea se despachen por completo y se introduzcan en el sistema de etiquetado de precios.

Máquina universal (cortador, amasadora, mezcladora, agitador) en diseño de acero inoxidable, principalmente para la producción de productos alimenticios como salchichas, productos de pasta, salsas, etc., la velocidad se puede cambiar en dos etapas (680 / 1.430 rpm), potencia de accionamiento 3,3 / 4,5 kW.

Venta Molino de discos de corindón / molino de mostaza MK95 de segunda mano

Instalación 2020 Parada de la planta después de 6 meses y pruebas cortas Precio original 166.000,00 € Estación de dosificación y cribado Productos - Nombre del producto: Especias - Densidad aparente: aprox. 0,4 - 0,7 kg/itr (suposición AZO) Características del sistema Características eléctricas Tensión de funcionamiento: 230/400 V; 50 Hz. Voltaje de control: 24 VDC Grado de protección: IP 54 Características del aire comprimido Presión de servicio: mín. 5 bar /máx. 6 bar Conexiones > 1/2 pulgada Clase de calidad del aire comprimido según ISO 8573-1 Impurezas sólidas: clase de calidad 1 Humedad - a temperatura ambiente > 3C: clase de calidad 2/3 - a temperatura ambiente 10 mJ - Valor KST < 200 bar m/s - temperatura de ignición > 300 C - Temperatura de combustión lenta > 275 C - Resistencia de contacto > 10 ohmiosm

description: High quality control unit for pallet conveyors for a part of a 50.000 bph filling line For approx. 5 frequency controlled drives in a total, diverse protective switches (see pictures for details). The Danfoss inverters are overhauled (formated) and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit  ...

description: High quality control unit for bottle conveyors for a huge part of a 50.000 bph filling line with several KHS control units for approx. 44 drives in a total. The KHS switchboards are air conditioned. The Danfoss inverters are overhauled and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Kne ...

description: Here we offer a whole range of different Siemens Simatic S7 components. It is possible to buy the entire range, but it is also possible to buy parts from the pallets. After delivery / pickup, you have the right to return the purchase without giving reasons, within 2 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800 and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee Besides buying and selling of conveyors and machines our strength lies particularly in services and p ...

description: Cap inspection in the infeed of the seamer. Complained caps will be discharged by air nozzles. Unobjected caps pass through a channel to the seamer. It was running with 60.000 b/h All statements without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide  ...

- Condición: Sistema de demostración - Volumen útil: 160 L - incl. control - Incl. bomba para vaciado

- Condición: Sistema de demostración - Volumen útil: 120 L - incl. control - Incl. bomba para vaciado

- Condición: Sistema de demostración - Volumen útil: 80 L

- Condición: Sistema de demostración - Volumen útil: 210 L - en varillas de pesaje

- Condición: Sistema de demostración - Volumen útil: 210 L - incl. control - Incl. bomba para vaciado

Mezclador continuo de acero inoxidable Tan bueno como nuevo Accionamiento del motor 7,5 KW Capacidad hasta 15 t/h Adición de líquidos de hasta el 3%