tornos usadas para la venta (3,041)

diámetro de torneado: 110 mm. Longitud de tornado: 450 mm. control: Siemens requerimiento total de potencia: kWpeso de la máquina, aprox. 9000 kg. Dimensiones de la máquina, aprox. m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado: 160 mm. Longitud de tornado: 550 mm. control: Siemens consumo total de potencia: kWpeso de la máquina, aprox. 9000 kg. Dimensiones de la máquina. Ca.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado: - mm Longitud de torneado: - MmSwing diameter sobre la corredera de la cama: - mmRequisito total de potencia: - kWweight de la máquina aprox: - tDimensiones de la máquina ca.: - mWEILER Bundle- RDU - LZ 330- 2 x Commodor- UD 24- DZ 67 V3. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 550 - 1100 mmclamping length: 1650 - 2400 mmguage width: 1435 mmmotor power: 60 (each Chuck) kwspindle turning speed range: 9 - 180 U/minworkpiece weight: 3500 kgtotal power requirement: 228 kVAweight of the machine ca.: 54 tdimensions of the machine ca.: 7,9 x 3,55 x 3,4 mThe Hegenscheidt-MFD portal wheel lathe is a wheel lathethat is easy to operate and maintain. Its portal design allows for wheel setsto roll through the lathe on shop rails. The mechanical elements and drive system are designed for cutting performance up to 32 mm² per tool post. This allows for a short floor-to-floor time for re-profiling, even for extreme wheelwear conditions.Mounted to each side of the portal type bed are the headstocks, with integrateddrivers, centers and a main drive system fitted to each headstock. Both headstocks are movable for ease of the load and unload functions.- Working R ...

turning diameter: 1000 mmturning length: 3000 mmcontrol: Siemens 828D turning diameter over bed: 1000 mmturning diameter over slide rest: 700 mmworkpiece weight: tspindle drive motor: 33,6 kWspindle turning speed range: 1 - 550 U/mincentre height: 510 mmx-axis: 520 mmz-axis: 3020 mmspindle bore: 260 mmspindle nose: A2-15 tailstock quill taper MT: 5 diameter of quill: 130 mmtailstock quill stroke: 200 mmrapid travel (x and z-axis): 8 m/mintotal power requirement: 40 kVAweight of the machine ca.: 12,2 tdimensions of the machine ca.: 7,52 x 3,2 m- Siemens 828D CNC- C-axis- 8-station tool turret with powered tools (VDI 50), 3000 rpm- Tailstock- Powered tool holders- Chip conveyor- CEOperating hours: 2000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1930 mmturning diameter over slide rest: 1520 mmturning length: 5000 mmturning speeds: 0,5-250 U/minspindle bore: 105 mmworkpiece weight: 35 tsteady: 400-700 mmsteady: 700-1200 mmsteady: 1000-1600 mmcontrol: Siemens total power requirement: 106 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamTh ...

diámetro de torneado: 480 mm, longitud de torneado: 800 mm. control: Sistema TX8F, diámetro de giro sobre la corredera: 240 mm, paso del husillo: 65 mm, diámetro de la manduca: 200 mm, velocidades de giro: 4000 U/min, capacidad de potencia: 30 kW, requisito total de potencia: kWpeso de la máquina, aprox. 4,3 tdimensiones de la máquina aprox. herramientas motorizadas. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

faceplate diameter: 1400 mmswing diameter: 1600 mmturning height: 1200 mmturning speed range - milling: 1 - 240 U/minControl: Siemens SIN 820T ram head - cross travel: 1000 mmtotal power requirement: 55 kWweight of the machine ca.: dimensions of the machine ca.: mA.T.C. 12 positionsToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 660 mmturning length: 2000 mmcontrol: Fagor 8050 turning diameter over bed slide: 370 spindle diameter: 104 mmtotal power requirement: 18 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1800 mmturning height: 1600 mmturning diameter over bed: 2150 mmturning speeds: 3,15 - 250 U/minvoltage: 400 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 930 mmturning diameter over slide rest: 630 mmturning length: 6000 mmturning dia. in gap: 1250 mmspindle diameter: 95 mmspeed: 8-800 (x24) U/mintotal power requirement: 22 kWweight of the machine ca.: 1100 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2000 mmturning diameter over slide rest: 1050 mmturning length: 7000 mmspeed: 1,6 - 250 U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: max.: 4000 mmturning diameter over slide rest: . mmturning length: 7700 mmspeed: 0-750 u/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 2400 mmturning length: 6000 mmcontrol: Siemens 880T Turning diameter over slide: 1400 spindle diameter: 320 mmspeed: 0.4 - 1000 m/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mmswing diameter: 2700 mmturning height: 1600 mmturning speed range - milling: 1,18 - 32,5 U/minturning speed range - milling: 4,25 - 117 U/minworkpiece weight: 10000 kgside head - cross travel: 800 mmram head - cross travel: 45 degrees - 1000 mmram head - cross travel: 30 degrees - 1000 mmtotal power requirement: 80 kWweight of the machine ca.: tdimensions of the machine ca.: m2-Axis D.R.O.5 positions turretThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carrera del husillo: 3000 mm carrera del husillo - máx.: 330 mm: 2820 Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de torneado: - mmLongitud de giro: - mmcontrol: BOSCH CC 200 consumo total de potencia: - kWweight de la máquina aprox.: - tDimensiones de la máquina aprox.: - mMovie:https://www.youtube.com/watch?v=lr-NrroeTtAt Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado sobre la cama: 380 mm diámetro de giro sobre el reposacabezas: 190 mm longitud de torneado: 1000 mm Consumo total de potencia: 4 kWweight de la máquina aprox: 2 tDimensiones de la máquina aprox: 2,5+1+1,8 mPelícula: https://www.youtube.com/watch?v=ckpr4-sE7K4Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de torneado: 220 mm longitud de giro: 450 mm. control: Siemens 840 D transmisión principal DC: 27 kW, consumo total de potencia: 27 + 8,5 + 5 + x kWweight de la máquina, aprox. 6,5 tdimensiones de la máquina, aprox: 10 x 2 x 2 m. Película: https://www.youtube.com/watch?v=OffdO1J4G5YTos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

x-travel: 185 mmz-travel: 360 mmb-travel: 460 mmcontrol: Mazatrol 640 T Maximum swing diameter: 550 mmMaximum turning diameter: 280 mmworkpiece weight max.: 200 kgbar capacity: 51 mmmain spindle speed: 35-6000 U/minmilling head speed: 25-4500 U/minrapid power traverse in X-and Z direction: 30/33 m/minRapid traverse B axis: 30 m/mintool turret: 12 Plätzeweight of the machine ca.: 4100 kgCapacity:Chuck size: 6 inchesMax. swing diameter: 550 mmStandard turning diameter: 221 mm Max. turning diameter: 280 mmMax. bar capacity: 51 mmDistance between spindle nose and turret edge: 80–535 mmMain spindle:Speed: 35–6000 rpmSpindle bore: 61 mmCounter spindle:Speed: 35–6000 rpmSpindle bore: 52 mmTurret:Number of tools: 12 piecesTool size: External turning t ...

altura central: 200 mm distancia central: 1.000 mm rango de velocidad de giro del husillo: 1600 U/diámetro mínimo: 42 mm longitud de giro: 1600 mm diámetro de giro sobre la cama: 410 mm: 230 mm peso de la máquina aprox.: 1,700 kg dimensiones: 2000 × 1000 × 1500 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 330 mmturning length: 669 mmcontrol: Sinumerik 828D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 828D12-fold revolver Sauter VDI40driven toolsC-axis3-jaw chuckTool Eyepart catcherchip conveyortail stockcoolant device with high pressure pumpbar loading device IemcaTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 600 mmmax. Drehdurchmesser / max. turning diameter 330 mmmax. Drehlänge / max. turning length 669 mmX-Weg / X-travel 260 mmZ-Weg / Z-travel 762 mmDrehzahl / spindle speed 3400 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesmax. Stangendurchmesser / max. bar diameter 75 mmEilgang X / rapid feed X 20 m/minEilgang Z / rapid feed Z 24 m/min.Gewicht der Maschine ca. / weight ca. 5700 kgT ...

turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmbar capacity: 56 mmturning speed range: 25 - 2000 U/minspindle nose: A2-6 total power requirement: 4,0 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: LBH ca. 2,5 x 1,2 x 1,8 m- RÖHM 3 Jaw Chuck Ø 250 mm- MULTIFIX Holder - Size B - Tailstock- Coolant pump with reservoir- Various turning tool holders- Various small partsWorkshop machineOtherwise, the gearbox runs quietly and the guides have no scratches, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 7100 mmswing diameter: 8000 mmturning height: 5030 mmdistance between table and cross rail: 5495 mmworkpiece weight: 200 tfaceplate turning speed range: 0,3 - 19 U/minmain drive motor: 125 kWcross travel: 4400 mmswivel range of slides - vertical: +30 / -15 °Control: FANUC 18i-TB total power requirement: ca. 155 kWweight of the machine ca.: 291 tdimensions of the machine ca.: 8,6 x 17,6 x 8,3 m2003 Retrofit and change to CNC- CNC Control Fanuc 18i-TB--2-Axis simultanous (X- & Z)- Z-Axe with hydraulic balance- Digital Scale in X and Z Axis- 2 rams on crossrailThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 410 mmy-travel: 570 mmz-travel: 140 mmcontrol: Mazatrol Matrix Maximum working diameter: 545 mmMaximum working length: 519 mmmain spindle speed: 35 - 6000 U/mintool taper: Capto C6 rapid traverse y/x/z axis: 30/26/33 m/minPerformance/capacity:Max. swivel range: 545 mmMax. machining diameter: 545 mmMax. outside diameter for bar work: 51 mmMax. machining length: 519 mmMax. workpiece weight:-Chuck work: 150 kg -Bar work: 200 kgMain spindle:Spindle speed: 35-6000 rpmSpindle bore diameter: 61 mmMax. torque: 161 NmTailstock:Rapid traverse: 8 m/minTravel range (advance/return): 434/281 mmMilling head:Milling head type: Single spindle with ATCTool shank type: Capto C6Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 ? x 200 long mmMilling s ...

turning diameter over bed: 410 mmturning diameter over slide rest: 220 mmturning length: 1000 mmcentre height: 205 mm: mmspindle bore: 46 mmspindle turning speed range: 40 - 2000 U/mintotal power requirement: 22,0 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,42 x 1,3 x 1,55 mmLathes with:- Copying attachment- Forkardt 3-jaw chuck F250- Multifix tool post- Coolant system- Machine light- Chuck guard- Chip tray- Chip guard wall- Foot brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 240 mmturning length: 530 mmcontrol: Siemens 810 D Powerline swing diameter: 560 mmx-travel: 207,5 mmz-travel: 530 mmturning speeds: 6000 U/min: 12 Stk. total power requirement: --- kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: max. 450 mmchucking diameter: 400 mmcontrol: Siemens 840D (Index)Main spindle:: Max. rpm: 4.200 min/-1power capacity - main spindel: ( 35,5 / 56 ) kWmax. Torque: ( 340 / 550 ) NmC-Axis: 0,001 °turret:: number of toolpositions: 2x 12 posdriven statition: 2x 12 posworktool system: VDI 30 max. spindle speed driven tools: 6.000 U/min.power capacity - driven tools: 9,5 kWmax. Torque: 40%: 19 NmY - Axis: +/- 90 mmB-Axis: +270° / -90 °axis stroke:: x-axis: 730 mmz-axis: 340 mmy-axis: +/- 90 mmb-axis: +270° / -90 °feeds:: rapid traverse: X: 40 / Z: 30 m/minpallet changer:: numbers of pallets: 24 pos.size of pallet: 410 x 300 mmmax. workpiecediameter: 300 mmmax. workpiece weight: incl. Pallet: 25 kgChain width: 75 mmband speed: 7,5 m/mintotal power requirement: 56 kWweight of the machine ca.: 9,0 tdimensions of the machine ca.: 8,5 x 6,0 x 2,7 mDocuments: Chip conveyo ...

turning diameter: 300 mmturning length: 1700 mmswing diameter over bed slide: 600 mmtotal power requirement: 12,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 10000 mmswing diameter: 14000 mmturning height: 8000 mmControl: Siemens Sinumerik 840 D workpiece weight max.: 500 tfaceplate turning speed range: 0,2 - 35 U/mindrive motor: 300 kWram head dimension: 600 x 600 mmmax. ram stroke: 4000 mmmilling drive: 100 kWhob turning speeds: 3000 U/minrapid traverse x + z axis: 10 m/mintotal power requirement: - kWweight of the machine ca.: 350 tMachine has never been used and is still original, seaworthy packed andstored.equipped with:- CNC control Siemens Sinumerik 840 D- Hydrostatic axes- Hydrostatic table- Milling device- Hirth couplings for tool holderAcessories:• VERTICAL HEAD ISO50 BIG PLUS AD 8T5060164• VERTICAL HEAD ISO50 BIG PLUS AD 6000RPM 8T5060165• HORIZZONTAL HEAD ISO50 BIG PLUS 8T5060163• UNIVERSAL HEAD TU-50- ISO50 AD BIG PLUS 8T5060171• HEAD DANDREA UT-8-800-S 8T5060166• TOOL HOLDER DEVICE 8T1203783• T ...